References
- Abid M, Kchaou M, Hoang AT, Haboussi M. Wear Mechanisms Analysis and Friction Behavior of Anodic Aluminum Oxide Film 5083 under Cyclic Loading. J Mater Eng Perform 2024;33:1527–1537. https://doi.org/10.1007/s11665-023-08616-8.
- George JS, Vijayan P P, Hoang AT, Kalarikkal N, Nguyen-Tri P, Thomas S. Recent advances in bio-inspired multifunctional coatings for corrosion protection. Prog Org Coatings 2022;168:106858. https://doi.org/10.1016/j.porgcoat.2022.106858.
- Hoang AT, Tran TT Van, Nguyen VB, Nguyen DN. Effect of Heat Treatment Process on The Microstructure and Mechanical Properties of The Spray Coating Ni-Cr on CT38 Steel. Int J Adv Sci Eng Inf Technol 2019;9:560–568. https://doi.org/10.18517/ijaseit.9.2.7891.
- Thi H, Quyen N, Tuan VA, Dong TP, Quyen VV, Nam ND. Effect of Rare Earth on M7C3 Eutectic Carbide in 13 % Chromium Alloy Cast Iron. Int J Adv Sci Eng Inf Technol 2019;9:724–728.
- Liu D, Li Q, Emi T. Microstructure and mechanical properties in hot-rolled extra high-yield-strength steel plates for offshore structure and shipbuilding. Metall Mater Trans A 2011;42:1349–1361.
- Wang S, Dai J, Wang J, Li R, Wang J, Xu Z. Numerical calculation of high-strength-steel saddle plate forming suitable for lightweight construction of ships. Materials (Basel) 2023;16:3848.
- Backman J, Kyllönen V, Helaakoski H. Methods and tools of improving steel manufacturing processes: Current state and future methods. IFAC-PapersOnLine 2019;52:1174–9.
- Geng X, Wang F, Wu H, Wang S, Wu G, Gao J, et al. Data-driven and artificial intelligence accelerated steel material research and intelligent manufacturing technology. Mater Genome Eng Adv 2023;1:e10.
- Kučerová L, Jirková H, Mašek B. Continuous Cooling of CMnSi TRIP Steel. Mater Today Proc 2015;2:S677–680. https://doi.org/10.1016/j.matpr.2015.07.374.
- Feng X, Liu X, Bai S, Tang Y, Ye Y. Investigation of dynamic tensile mechanical responses and deformation mechanism at high strain rates in a TWIP steel. J Mater Res Technol 2023;26:639–653. https://doi.org/10.1016/j.jmrt.2023.07.241.
- Mintz B, Qaban A, Kang SE. The Influence of Small Additions of Alloying Elements on the Hot Ductility of AHSS Steels: A Critical Review Part 2. Metals (Basel) 2023;13:406.
- Chen Z, Gu J, Han L. Bainite Transformation Characteristics of High-Si Hypereutectoid Bearing Steel. Metallogr Microstruct Anal 2018;7. https://doi.org/10.1007/s13632-017-0410-5.
- Hasan SM, Kumar S, Chakrabarti D, Singh SB. Effect of prior austenite grain size on the formation of carbide-free bainite in low-alloy steel. Philos Mag 2020;100. https://doi.org/10.1080/14786435.2020.1764653.
- Leach L. Modeling Bainite Formation in Steels. KTH Royal Institute of Technology; 2018.
- Morawiec M, Ruiz-Jimenez V, Garcia-Mateo C, Grajcar A. Thermodynamic analysis and isothermal bainitic transformation kinetics in lean medium-Mn steels. J Therm Anal Calorim 2020;142:1709–1719. https://doi.org/10.1007/s10973-020-10259-z.
- Rodrigues KF, Mourão GMM, Faria GL. Kinetics of Isothermal Phase Transformations in Premium and Standard Rail Steels. Steel Res Int 2021;92. https://doi.org/10.1002/srin.202000306.
- Hendi SH, Panahiyan S, Panah BE, Jamil M. Alternative approach to thermodynamic phase transitions. Chinese Phys C 2019;43. https://doi.org/10.1088/1674-1137/43/11/113106.
- Park J, Min KM, Kim H, Hong S, Lee M. Integrated Computational Materials Engineering for Advanced Automotive Technology: With Focus on Life Cycle of Automotive Body Structure. Adv Mater Technol 2023;8. https://doi.org/10.1002/admt.202201057.
- Nguyen VN, Nguyen AX, Nguyen DT, Le HC, Nguyen VP. A Comprehensive Understanding of Bainite Phase Transformation Mechanism in TRIP Bainitic-supported Ferrite Steel. Int J Adv Sci Eng Inf Technol 2024;14:309–325. https://doi.org/10.18517/ijaseit.14.1.19706.
- Van HD, Van CN, Ngoc TT, Manh TS. Influence of heat treatment on microstructure and mechanical properties of a CMnSi TRIP steel using design of experiment. Mater Today Proc 2018;5:24664–24674. https://doi.org/10.1016/j.matpr.2018.10.264.
- Fu YT, Liu J, Shi J, Cao WQ, Dong H. Effects of Cold Rolling Reduction on Retained Austenite Fraction and Mechanical Properties of High-Si TRIP Steel. J Iron Steel Res Int 2013;20:50–56. https://doi.org/10.1016/S1006-706X(13)60097-7.
- Srivastava AK, Jha G, Gope N, Singh SB. Effect of heat treatment on microstructure and mechanical properties of cold rolled C-Mn-Si TRIP-aided steel. Mater Charact 2006;57:127–135. https://doi.org/10.1016/j.matchar.2006.01.010.
- Zhu R, Li S, Karaman I, Arroyave R, Niendorf T, Maier HJ. Multi-phase microstructure design of a low-alloy TRIP-assisted steel through a combined computational and experimental methodology. Acta Mater 2012;60:3022–3033. https://doi.org/10.1016/j.actamat.2012.02.007.
- Sierra R, Nemes JA. Investigation of the mechanical behaviour of multi-phase TRIP steels using finite element methods. Int J Mech Sci 2008;50:649–665. https://doi.org/10.1016/j.ijmecsci.2008.01.005.
- Tian Y, Li Z. Effects of Warm Deformation on Mechanical Properties of TRIP Aided Fe-C-Mn-Si Multiphase Steel. J Iron Steel Res Int 2012;19:47–52. https://doi.org/10.1016/S1006-706X(12)60126-5.
- Park HS, Han JC, Lim NS, Park CG. Nano-scale observation on the transformation behavior and mechanical stability of individual retained austenite in CMnSiAl TRIP steels. Mater Sci Eng A 2015;627:262–269. https://doi.org/10.1016/j.msea.2015.01.005.
- Wang ZC, Kim SJ, Lee CG, Lee TH. Bake-hardening behavior of cold-rolled CMnSi and CMnSiCu TRIP-aided steel sheets. J Mater Process Technol 2004;151:141–145. https://doi.org/10.1016/j.jmatprotec.2004.04.029.
- Chen XX, Shen J, Kecskes LJ, Wei Q. Tungsten-based heterogeneous multilayer structures via diffusion bonding. Int J Refract Met Hard Mater 2020;92:105308. https://doi.org/10.1016/j.ijrmhm.2020.105308.
- Kliber J, Mašek B, Zacek O, Staňková H. Transformation Induced Plasticity (TRIP) Effect Used in Forming of Carbon CMnSi Steel. Mater Sci Forum 2005;500–501:461–470. https://doi.org/10.4028/www.scientific.net/msf.500-501.461.
- De Cooman BC. Structure–properties relationship in TRIP steels containing carbide-free bainite. Curr Opin Solid State Mater Sci 2004;8:285–303.
- Fu B, Yang W, Li L, Sun Z. Effect of carbon content on microstructure and mechanical properties of cold-rolled C-Mn-Al-Si trip steel. Jinshu Xuebao/Acta Metall Sin 2013;49. https://doi.org/10.3724/SP.J.1037.2012.00656.
- Hien D Van. Influence of thermal-mechanical on microstructure and mechanical of TRIP CMnSi steel from foam-iron. Institute of Military Science and Technology, 2018.
- Wang S, Cao L, Zhang Z. Influence of Carbide Morphology on the Deformation and Fracture Mechanisms of Spheroidized 2019:1–11.
- Hojo T, Kobayashi J, Kajiyama T, Sugimoto K. Effects of Alloying Elements on Impact Properties of Ultra High-Strength TRIP-Aided Bainitic Ferrite Steels n.d.:9–16.
- Kowalski J, Kozak J. Numerical model of plastic destruction of thick steel structural elements. Polish Marit Res 2018; 25:78–84.
- Gu J, Fernandes AC, Chai W, Bu SX, Han X. Analytical and Experimental Investigation of Asymmetric Floating Phenomena of Uniform Bodies. Polish Marit Res 2024; 31:16–23. https://doi.org/doi:10.2478/pomr-2024-0002.