References
- IMO, Second IMO GHG Study 2009. London, UK, 2009.
- A. Banawan, M. Mosleh, and I. Seddiek, “Prediction of the fuel saving and emissions reduction by decreasing speed of a catamaran,” J. Mar. Eng. Techno., (3), vol. 12, pp. 40-48, 2013.
- M. H. Ghaemi and H. Zeraatgar, “Impact of propeller emergence on hull, propeller, engine, and fuel consumption performance in regular waves,” Pol. Marit. Res., (116), vol. 29, pp. 56-76, doi: 10.2478/pomr-2022-0044, 2022.
- M. Burak Samsul, “Blade cup method for cavitation reduction in marine propellers,” Pol. Marit. Res., 2 (110), vol. 28, pp. 54-62, 10.2478/pomr-2021-0021, 2021.
- P. Król, “Blade section profile array lifting surface design method for marine screw propeller blade,” Pol. Marit. Res., 4 (1040), vol. 26, pp. 134-141, doi: 10.2478/pomr-2019-0075, 2019.
- A. Nadery and H. Ghassemi, “Numerical investigation of the hydrodynamic performance of the propeller behind the ship with and without WED,” Pol. Marit. Res., 4 (108), vol. 27, pp. 50-59, doi: 10.2478/pomr-2020-0065, 2020.
- M. Perić, “Prediction of cavitation on ships,” Brodogradnja, vol. 73, no. 3, pp. 39-58, 2022.
- W. Tarełko, “The effect of hull biofouling on parameters characterizing ship propulsion system efficiency,” Pol. Marit. Res., 4(84), vol. 21, pp. 27-34X, 2014, doi: 10.2478/ pomr-2014-0038.
- L. Guangnian, Q. Chen, and Y. Liu, “Experimental study on dynamic structure of propeller tip vortex,” Pol. Marit. Res., 2 (106), vol. 27, pp. 11-18, 2020, doi: 10.2478/ pomr-2020-0022.
- Y. Zhang, X. Wu, M. Lai, G. Zhou, and J. Zhang, “Feasibility study of RANS in predicting propeller cavitation in behind-hull condition,” Pol. Marit. Res., 4 (108), vol. 27, pp. 26-35, 2020.
- ITTC Virtual, The Resistance and Propulsion Committee, Final Report and Recommendations to the 29th ITTC, 13-18 June ITTC 2021 Virtual.
- R. Townsin, and S. Dey, “The correlation of roughness drag with surface characteristics,” Fluid Mechanics and Its Applications, vol 6. Springer, Dordrecht, doi. org/10.1007/978-94-011-3526-9_10, 1991.
- Y. K. Demirel, “A CFD model for the frictional resistance prediction of antifouling coatings,” Ocean Eng., vol. 89, pp. 21-31, 2014.
- A. Vargas, and H. Shan, “Modeling of ship resistance as a function of biofouling type, coverage, and spatial variation,” in 2nd Hull Performance & Insight Conference, pp. 264-281, Ulrichshusen, Germany, 2017.
- C. Grigson, “Drag losses of new ships caused by hull finis,” J. Ship Res., vol. 36, no. 02, pp. 182-196, 1992.
- S. Song et al., “Investigating the effect of heterogeneous hull roughness on ship resistance using CFD,” JMSE, vol. 9, no. 2, p. 1, 2021.
- T. Cebeci and P. Bradshaw, “Momentum transfer in boundary layers,” in Series in Thermal and Fluids Engineering, P. Bradshaw, Ed. Washington: Hemisphere Pub. Corp., 1977.
- A. Farkas, N. Degiuli, and I. Martić, “Towards the prediction of the effect of biofilm on the ship resistance using CFD,” Ocean Eng., vol. 167, pp. 169-186, 2018.
- A. Farkas, N. Degiuli, L. Martic, and R. Dejhalla, “Impact of hard fouling on the ship performance of different ship forms,” JMSE, vol. 8, p. 748, 2020.
- A. Farkas, N. Degiuli, and I. Martić, “Impact of biofilm on the resistance characteristics and nominal wake,” Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, vol. 234, no. 1, pp. 59-75, 2020.
- A. Farkas, N. Degiuli, and I. Martić, “A novel method for the determination of frictional resistance coefficient for a plate with inhomogeneous roughness,” Ocean Eng., vol. 237, p. 109628, 2021.
- P. Kellett, K. Mizzi, K. Demirel, and O. Turan, “Investigation the roughness effect of biofouling on propeller performance,” International Conference on Shipping in Changing Climates, SEMANTIC SCHOLAR, ID 55216316, 2015.
- D. Owen, Y.K. Demirel, E. Oguz, T. Tezdoga, and A. Incecik, “Investigating the effect of biofouling on propeller characteristics using CFD,” Ocean Eng., vol. 159, pp. 505-516, 2018.
- S. Song, Y. Demirel, and M. Atlar, “An investigation into the effect of biofouling on full-scale propeller performance using CFD,” in: Proceedings of the ASME 2019 38th International Conference on Ocean, Offshore & Arctic Engineering OMAE2019, June 9-14, 2019, Glasgow, Scotland, UK, 2019.
- S. Song, Y. Demirel, and M. Atlar, “Propeller performance penalty of biofouling: CFD prediction,” J. Offshore Mech. Arct., vol. 142, no. 6, p. 0601901, 2020.
- A. Farkas, N. Degiuli, and I. Martić, “The impact of biofouling on the propeller performance,” Ocean Eng., vol. 219, p. 108376, 2021.
- A. Farkas, N. Degiuli, and I. Martić, “Assessment of the effect of biofilm on the ship hydrodynamic performance by performance prediction method,” International Journal of Naval Architecture and Ocean Eng., vol. 13, pp. 102-114, 2021.
- A. Farkas, S. Song, N. Degiuli, I. Martić, and Y.K. Demirel, “Impact of biofilm on the ship propulsion characteristics and the speed reduction,” Ocean Eng., vol. 199, p. 107033, 2020.
- M. P. Schultz and K. A. Flack, “The rough-wall turbulent boundary layer from the hydraulically smooth to the fully rough regime,” J. Fluid Mech., vol. 580, pp. 381-405, 2007.
- SVA Hydrodynamic Solutions, “Potsdam Propeller Test Case (PPTC) Open Water Tests with the Model Propeller VP1304,” 2011.
- L. F. Richardson, and J. A. Gaunt, “The deferred approach to the limit,” Philosophical Transactions of the Royal Society of London: Series A, vol. 226, pp. 299-361, 1927.
- U. Barkmann, H. Heinke, and L. Lubke, “Potsdam propeller test case (PPTC) test case description,” in: Second International Symposium on Marine Propulsors SMP’11, Hamburg, Germany, Workshop: Propeller Performance, 2011.
- M. P. Schultz, “Frictional resistance of antifouling coating systems,” J. Fluids Eng., vol. 126, pp. 1039-1047, 2004.
- J. Carlton, Marine Propellers and Propulsion. London: Butterworth Heinemann, 2010.