References
- J. Liu, F. Zeng, and J. Wu, Marine power plant. Huazhong University of Science and Technology Press, 2019.
- H. Yin, J. Liu, L. Shi, F. Zeng, and S. Liu, ‘Study on alignment characteristics of ship flexible propulsion shafting’, Journal of Propulsion Technology, Vol. 43(04), pp. 401-409, 2021. doi: 10.13675/j.cnki.tjjs.200644.
- C. Seo, B. Jeong, J-R. Kim, M. Song, J-H. Noh, and J. Lee, ‘Determining the influence of ship hull deformations caused by draught change on shaft alignment application using FE analysis’, Ocean Engineering, Vol. 210, 2020. 107488. doi: 10.1016/j.oceaneng.2020.107488.
- X. Huang, Z. Su, and H. Hua, ‘Application of a dynamic vibration absorber with negative stiffness for control of a marine shafting system’, Ocean Engineering, Vol. 155, pp. 131-143, 2018. doi: 10.1016/j.oceaneng.2018.02.047.
- Q. Huang, X. Yan, C. Zhang, and H. Zhu, ‘Coupled transverse and torsional vibrations of the marine propeller shaft with multiple impact factors’, Ocean Engineering, Vol. 178, pp. 48-58, 2019. doi: 10.1016/j.oceaneng.2019.02.071.
- H. Gholinezhad and S.H. Torabi, ‘Reliability-based multidisciplinary design optimisation of an underwater vehicle including cost analysis’, Journal of Marine Science and Technology, Vol. 2, 2021. doi: 10.1007/s00773-021-00804-2.
- L. Du, H. Hefazi, and P. Sahoo, ‘Multidisciplinary Design Optimisation of Life Cycle Benefit of Trimarans Using Monte Carlo Method’, Naval Engineers Journal, Vol. 131(3), pp. 79-90, 2011. doi: 10.1111/j.1559-3584.2010.00240.x.
- J. Liu, G. Lai, H. Yin, F. Zeng, R. Zhou, and J. Lei, ‘Research on multi-disciplinary design optimisation for marine motor driving shafting’, Shipbuilding of China, Vol. 60(2), pp. 150-163, 2019. doi: 10.3969/j.issn.1000-4882.2019.02.015.
- Y. Gao, ‘Research on the theory and application of marine propulsion shafting alignment under dynamic factors’. Wuhan University of Technology, 2012.
- G. Lai, J. Lei, J. Liu., S.Cao, H. Qin and F. Zeng, ‘Numerical and experimental study on comprehensive optimisation for the KPIs of ship propulsion shafting design based on MDO’, Ocean Engineering, Vol. 222, 108624, 2021. doi: 10.1016/j.oceaneng.2021.108624.
- A. Ursolov, Y. Batrak, and W. Tarelko, ‘Application of the optimisation methods to the search of marine propulsion shafting global equilibrium in running condition’ Polish Maritime Research, vol.26, no.3, pp.172-180, 2019. doi: https://doi.org/10.2478/pomr-2019-0058.
- CB/Z-338, ‘Propulsion Shaft Alignment of Ship’, 2005.
- R. Zhou, ‘The theoretic studies on the propulsion shafting alignment of ultra-large vessels’, Wuhan University of Technology, 2005.
- X. Pang, ‘Study on characteristics of bearing load and coupling vibration in multi-support rotor system’, Taiyuan University of Technology, 2011.
- Z. Lei, J. Su, and H. Hua, ‘Vibration and sound radiation analysis for a propeller-shaft-hullcoupled system in a catamaran SWATH ship’, Journal of Vibration and Shock, Vol. 35(21), pp. 17-21, 2016. doi: 10.13465/j.cnki.jvs.2016.21.003.
- H. Su, L. Gu, and C. Gong, ‘Applying the disciplinary relation matrix to multidisciplinary design optimisation modelling and solving’, Journal of Systems Engineering and Electronics, Vol. 28(4), pp. 703-716, 2017. doi: 10.21629/JSEE.2017.04.10.
- CCS, ‘Code for Naturalization and Construction of Steel Marine Vessels’, Beijing: China Communications Press, 2015.
- K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, ‘A fast and elitist multiobjective genetic algorithm: NSGA-II’, IEEE Transactions on Evolutionary Computation, Vol. 6(2), pp. 182-197, 2002. doi: 10.1109/4235.996017.
- B. Zhang, P. Zhang, X. Guo, and F. Zeng, ‘Multi-objective optimisation of marine diesel engine cooling system based on DOE-GA’, Journal of Propulsion Technology, Vol. 41(11), pp. 2518-2529, 2020. doi: 10.13675/j.cnki.tjjs.200317.
- K. Woloszyk and Y. Garbatov, ‘Analysis of Ultimate Compressive Strength of Cracked Plates with the Use of DoE Techniques’, Polish Maritime Research, vol. 27, no.3, pp. 109-120, 2020. doi: https://doi.org/10.2478/pomr-2020-0052.
- Z. Liu, ‘Research on intensity calculation and torsional vibration of marine shafting based on parameterization’, Huazhong University of Science & Technology, 2012.