Experimental and Numerical Investigations of Ultimate Strength of Imperfect Stiffened Plates of Different Slenderness
References
- 1. M. Taczala, “Approximate method for evaluation of stress-strain relationship for stiffened panel subject to tension, compression and shear employing the finite element approach,” Proc. MARSTRUCT 2009, 2nd Int. Conf. Mar. Struct. Des. Mar. Struct., 2009. pp. 155–61.
- 2. J. Czujko, A. Bayatfar, M. Smith, M. Xu, D. Wang, M. Lützen et al., “Committee III.1: Ultimate Strength,” in: M. Kaminski, P. Rigo, Eds. Proc. 20th Int. Sh. Offshore Struct. Congr. (ISSC 2018), vol. 1, IOP Press; 2018. pp. 335–439.
- 3. D.W. Lang, W.G. Warren, “Structural strength investigations on the destroyer Albuera,” Trans. Inst. Nav. Arch., vol. 94, pp. 243–86, 1952.
- 4. Y. Wang, S. Xu, A. Li, “Flexural performance evaluation of corroded steel beams based on 3D corrosion morphology,” Struct. Infrastruct. Eng., vol. 16, pp. 1–16, 2020.
- 5. D. Faulkner, “A review of effective plating for use in the analysis of stiffened plating in bending and compression,” J. Sh. Res., vol. 19, pp. 1–17, 1975.
- 6. K. Woloszyk, Y. Garbatov, “Analysis of ultimate compressive strength of cracked plates with the use of DOE techniques,” Polish Marit. Res., vol. 27, pp. 109–20, 2020.
- 7. M. Horne, R. Narayanan, “Ultimate capacity of stiffened plates used in girders,” Proc. Inst. Civ. Eng., vol. 61(2), pp. 253–80, 1976.
- 8. M.R. Manco, M.A.Vaz, J.C.R. Cyrino, N.M. Ramos, D.A. Liang, “Experimental and numerical study of uniaxially compressed stiffened plates with different plating thickness,” Thin-Walled Struct., vol. 145, p. 106422, 2019.
- 9. O. Ozguc, “Assessment of buckling behaviour on an FPSO deck panel,” Polish Marit. Res., vol. 27, pp. 50–8, 2020.
- 10. P. Dowling, S. Chatterjee, P.A. Frieze, F.M. Moolani, “Experimental and predicted collapse behaviour of rectangular steel box girders,” Int. Conf. on Steel Box Girder Bridges, London: Institute of Civil Engineers, 1973. pp. 77–94.
- 11. S. Saad-Eldeen, Y. Garbatov, C. Guedes Soares, “Ultimate strength assessment of corroded box girders,” Ocean Eng. vol. 58, pp. 35–47, 2013.
- 12. S. Saad-Eldeen, Y. Garbatov, C. Guedes Soares, “Experimental assessment of the ultimate strength of a box girder subjected to severe corrosion,” Mar. Struct., vol 24, pp. 338–57, 2011.
- 13. S. Saad-Eldeen, Y. Garbatov, C.G. Soares, “Corrosion-dependent ultimate strength assessment of aged box girders based on experimental results,” J. Sh. Res., vol. 55, pp. 289–300, 2011.
- 14. S. Xu, B. Liu, Y. Garbatov, W. Wu, C. Guedes Soares, “Experimental and numerical analysis of ultimate strength of inland catamaran subjected to vertical bending moment,” Ocean Eng., vol. 188, p. 106320, 2019.
- 15. J. Wang, S. Zang, “Ultimate strength experimental research for longitudinal box girders module model,” Shipbuilding China, vol. 2, p.008, 2011.
- 16. K. Woloszyk, Y. Garbatov, J. Kowalski, L. Samson, “Numerical and experimental study on effect of boundary conditions during testing of stiffened plates subjected to compressive loads,” Eng. Struct. 2020, submitted for publication.
- 17. K. Woloszyk, Y. Garbatov, “FE analysis of support-specimen interaction of compressive experimental test,” in: Sustainable Development and Innovations in Marine Technology, P. Georgiev, C.G. Soares, Eds. CRC Press, 2019, pp. 423–8.
- 18. S. Zhang, “A review and study on ultimate strength of steel plates and stiffened panels in axial compression,” Ships Offshore Struct., vol. 11(1), pp. 81–91, 2015.
- 19. M. Chmielewski, L. Piotrowski, B. Augustyniak, “A fast procedure of stress state evaluation in magnetically anisotropic steels with the help of a probe with adjustable magnetizing field direction,” Meas. Sci. Technol., vol. 28, p. 045903, 2017.
- 20. Y. Garbatov, C. Guedes Soares, K. Masubuchi, “Residual stresses and distortion in welds,” in: Reference Modules in Materials Science and Materials Engineering, Elsevier, 2016.
- 21. ANSYS. Online Manuals, Release 19 2019.
- 22. K. Woloszyk, Y. Garbatov, “Uncertainty assessment of ultimate strength of corroded stiffened plates subjected to maintenance,” in: Sustainable Development and Innovations in Marine Technology, P. Georgiev, C. Guedes Soares, Eds. CRC Press, 2019, pp. 429–36.
- 23. T. Urbański, A. Banaszek, W. Jurczak, “Prediction of welding-induced distortion of fixed plate edge using design of experiment approach,” Polish Marit. Res., vol. 27, pp. 134–42, 2020.
- 24. T. Urbański, M. Taczała, “Prediction of a transverse shrinkage of butt welded joints in shipyard conditions using the design of experimental approach,” Int. J. Nav. Archit. Ocean Eng., vol. 12, pp. 784–98, 2020.
- 25. B.Q. Chen, Y. Garbatov, C. Guedes Soares, “Measurement of weld-induced deformations in three-dimensional structures based on photogrammetry technique,” J. Sh. Prod., vol. 27, pp. 51–62, 2011.
- 26. K. Woloszyk, P. Bielski, Y. Garbatov, T. Mikulski, “Photogrammetry image-based approach for imperfect structure modelling and FE analysis,” 2020, manuscript in preparation.
- 27. J. Cui, D. Wang, “An experimental and numerical investigation on ultimate strength of stiffened plates with opening and perforation corrosion,” Ocean Eng., vol. 205, p. 107282, 2020.
- 28. K. Woloszyk, Y. Garbatov, “Ultimate strength of stiffened plates subjected to compressive load and spatially distributed mechanical properties,” in: Proceedings MARTECH 2020, 2020, (accepted for print).
- 29. International Association of Classification Societies. Common Structural Rules (BC & OT). 2018.
- 30. J.K. Paik, A.K. Thayamballi, “Empirical formulation for predicting the ultimate compressive strength of stiffened panels,” Proc. Int. Offshore Polar Eng. Conf., 1997.
Language: English
Page range: 120 - 129
Published on: Dec 24, 2020
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2020 Krzysztof Woloszyk, Yordan Garbatov, Jakub Kowalski, Leszek Samson, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution 4.0 License.