Influence of Process of Straightening Ship Hull Structure Made of 316L Stainless Steel on Corrosion Resistance and Mechanical Properties
References
- 1. ASTM. (2003): ASTM G48–03, Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution. ASTM International, West Conshohocken.
- 2. Dobrzański L. (2004): Metal Engineering Materials. WNT, Warsaw.
- 3. Hu C. Y., Wan X. L., Wu K. M., Xu D. M., Li G. Q., Xu G., Misra R. D. K. (2020): On the Impacts of Grain Refinement and Strain-Induced Deformation on Three-Body Abrasive Wear Responses of 18Cr–8Ni Austenitic Stainless Steel. Wear, Vol. 446/447 (December 2019). https://doi.org/10.1016/j.wear.2019.20318110.1016/j.wear.2019.203181
- 4. ISO. (1998): ISO 3651-2:1998Determination of Resistance to Intergranular Corrosion of Stainless Steels – Part 2: Ferritic, Austenitic and Ferritic-Austenitic (Duplex) Stainless Steels – Corrosion Test in Media Containing Sulphuric Acid. 2nd Edition, Geneva.
- 5. ISO. (2003): ISO 17639:2003 Destructive Tests on Welds in Metallic Materials – Macroscopic and Microscopic Examination of Welds. Geneva.
- 6. ISO. (2005): ISO 6507-1:2005 Metallic Materials – Vickers Hardness Test – Part 1: Test Method. Geneva.
- 7. ISO. (2012): ISO 4136:2012 – Destructive Tests on Welds in Metallic Materials – Transverse Tensile Test. ISO, Geneva.
- 8. ISO. (2014): ISO 6506-1:2014 Metallic Materials – Brinell Hardness Test – Part 1: Test Method. Geneva.
- 9. ISO. (2016): ISO 148-1:2016 Metallic Materials – Charpy Pendulum Impact Test – Part 1: Test Method. Geneva.
- 10. ISO. (2016): ISO 6892-1:2016 Metallic Materials – Tensile Testing – Part 1: Method of Test at Room Temperature. Geneva.
- 11. ISO. (2017): ISO 15614-1:2017 Specification and Qualification of Welding Procedures for Metallic Materials – Welding Procedure Test – Part 1: Arc and Gas Welding of Steels and Arc Welding of Nickel and Nickel Alloys. Geneva.
- 12. Jakubowski M. Corrosion Fatigue Crack Propagation Rate Characteristics for Weldable Ship and Offshore Influence of Loading Frequency and Saltw. Polish Maritime Research. 2017, Volume 24: Issue 1 DOI: https://doi.org/10.1515/pomr-2017-0011.10.1515/pomr-2017-0011
- 13. Kozak J., Tarelko W. Case study of masts damage of the sail training vessel POGORIA. Engineering Failure Analysis. 2011, Tomy Volume 18, Issue 3, Pages 819-827, https://doi.org/10.1016/j.engfailanal.2010.11.016.10.1016/j.engfailanal.2010.11.016
- 14. Łabanowski J., Jurkowski M., Fydrych D., Rogalski G. (2017): Durability of Welded Water Supply Pipelines Made of Austenitic Steels. Przegląd Spawalnictwa, Vol. 89. https://doi.org/10.26628/wtr.v89i8.801.
- 15. PKN. (2003): PN-EN 10088-1:1998/Ap 2003, Stale Odporne Na Korozję – Część 1: Wykaz Stali Odpornych Na Korozję. PKN, Warsaw.
- 16. Singh S., Andersson J. (2016): Review of Hot Cracking Phenomena in Austenitic Stainless Steels. 7th International Swedish Production Symposium.
- 17. Singh S., Hurtig K., Andersson J. (2018): Investigation on Effect of Welding Parameters on Solidification Cracking of Austenitic Stainless Steel 314. Procedia Manufacturing, Vol. 25, 351–357. https://doi.org/10.1016/j.promfg.2018.06.103.10.1016/j.promfg.2018.06.103
- 18. Tsouli S., Lekatou A. G., Nikolaidis C., Kleftakis, S. (2019): Corrosion and Tensile Behavior of 316L Stainless Steel Concrete Reinforcement in Harsh Environments Containing a Corrosion Inhibitor. Procedia Structural Integrity, Vol. 17, 268–275. https://doi.org/10.1016/j.prostr.2019.08.036.10.1016/j.prostr.2019.08.036
- 19. Xu D. M., Li G. Q., Wan X. L., Misra R. D. K., Yu J. X., Xu G. (2020): On the Deformation Mechanism of Austenitic Stainless Steel at Elevated Temperatures: A Critical Analysis of Fine-Grained versus Coarse-Grained Structure. Materials Science and Engineering A, Vol. 773. https://doi.org/10.1016/j.msea.2019.138722.10.1016/j.msea.2019.138722
- 20. Yari M. (2017): An Intro to Pipeline Corrosion in Seawater. Corrosionpedia Vol. 2, 1432. https://www.corrosionpedia.com/2/1432/corrosion-101/an-intro-to-pipeline-corrosion-in-seawater (accessed: 29 April 2020)
- 21. Yin F., Yang L., Wang M., Zong L., Chang X. (2019): Study on Ultra-Low Cycle Fatigue Behavior of Austenitic Stainless Steel. Thin-Walled Structures. Vol. 143, 106205. https://doi.org/10.1016/j.tws.2019.106205.10.1016/j.tws.2019.106205
Language: English
Page range: 103 - 111
Published on: Dec 24, 2020
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2020 Jakub Kowalski, Łukasz Licznerski, Milena Supernak-Marczewska, Krzysztof Emilianowicz, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution 4.0 License.