References
- 1. Woloszyk K., Kahsin M., Garbatov Y. (2018): Numerical assessment of ultimate strength of severe corroded stiffened plates. Engineering Structures, 168, 346–54.10.1016/j.engstruct.2018.04.085
- 2. Saad-Eldeen S., Garbatov Y., Guedes Soares C. (2016): Ultimate strength analysis of highly damaged plates. Marine Structures, 45, 63–85.10.1016/j.marstruc.2015.10.006
- 3. Roy Y. A., Shastry B. P., Rao G. V. (1990): Stability of square plates with through transverse cracks. Computers and Structures, 36, 387–8.10.1016/0045-7949(90)90137-Q
- 4. Shaw D., Huang Y. H. (1990): Buckling behaviour of a central cracked thin plate under tension. Engineering Fracture Mechanics, 35, 1019–27.10.1016/0013-7944(90)90129-5
- 5. Riks E., Rankin C. C., Brogan F. A. (1992): The buckling behaviour of a central crack in a plate under tension. Engineering Fracture Mechanics, 43, 529–48.10.1016/0013-7944(92)90197-M
- 6. Kumar Y. V. S., Paik J. K. (2004): Buckling analysis of cracked plates using hierarchical trigonometric functions. Thin-Walled Structures, 42, 687–700.10.1016/j.tws.2003.12.012
- 7. Paik J. K., Satish Kumar Y. V., Lee J. M. (2005): Ultimate strength of cracked plate elements under axial compression or tension. Thin-Walled Structures, 43, 237–72.10.1016/j.tws.2004.07.010
- 8. Babazadeh A., Khedmati M. R. (2018): Ultimate strength of cracked ship structural elements and systems: A review. Engineering Failure Analysis, 89, 242–57.10.1016/j.engfailanal.2018.03.003
- 9. Seifi R., Khoda-Yari N. (2011): Experimental and numerical studies on buckling of cracked thin-plates under full and partial compression edge loading. Thin-Walled Structures, 49(12), 1504–1516.10.1016/j.tws.2011.07.010
- 10. Shi X. H., Zhang J., Guedes Soares C. (2017): Experimental study on collapse of cracked stiffened plate with initial imperfections under compression. Thin-Walled Structures, 114, 39–51.10.1016/j.tws.2016.12.028
- 11. Saad-Eldeen S., Garbatov Y., Guedes Soares C. (2016): Experimental investigation on the residual strength of thin steel plates with a central elliptic opening and locked cracks. Ocean Engineering, 115, 19–29.10.1016/j.oceaneng.2016.01.030
- 12. Brighenti R. (2005): Numerical buckling analysis of compressed or tensioned cracked thin plates. Engineering Structures, 27, 265–76.10.1016/j.engstruct.2004.10.006
- 13. Rahbar-Ranji A., Zarookian A. (2015): Ultimate strength of stiffened plates with a transverse crack under uniaxial compression. Ships and Offshore Structures, 10, 416–25.10.1080/17445302.2014.942078
- 14. Cui C., Yang P., Xia T., Du J. (2016): Assessment of residual ultimate strength of cracked steel plates under longitudinal compression. Ocean Engineering, 121, 174–83.10.1016/j.oceaneng.2016.05.035
- 15. Bayatfar A., Khedmati M. R., Rigo P. (2014): Residual ultimate strength of cracked steel unstiffened and stiffened plates under longitudinal compression. Thin-Walled Structures, 84, 378–392.10.1016/j.tws.2014.07.002
- 16. Xia T., Yang P., Hu K., Cui C. (2018): Combined effect of imperfections on ultimate strength of cracked plates under uniaxial compression. Ocean Engineering, 150, 113–23.10.1016/j.oceaneng.2017.12.060
- 17. Cui C., Yang P., Li C., Xia T. (2017): Ultimate strength characteristics of cracked stiffened plates subjected to uniaxial compression. Thin-Walled Structures, 113, 27–38.10.1016/j.tws.2017.01.003
- 18. Yu C. L., Chen Y. T., Yang S., Liu Y., Lu G. C. (2018): Ultimate strength characteristic and assessment of cracked stiffened panel under uniaxial compression. Ocean Engineering, 152, 6–16.10.1016/j.oceaneng.2018.01.015
- 19. Saad-Eldeen S., Garbatov Y., Soares C. (2015): Ultimate strength of a corroded box girder subjected to pure bending and a non-propagating crack. In: Soares C., Dejhalla R., Pavletic D. (eds.), Towards Green Maritime Technology and Transport, CRC Press, pp. 373–80.
- 20. Saad-Eldeen S., Garbatov Y., Soares C. (2016): Emergency repair of a single hull structure with locked cracks. In: Soares C., Santos T. (eds.), Maritime Technology and Engineering III, CRC Press, pp. 521–9.10.1201/b21890-69
- 21. Babazadeh A., Khedmati M. R. (2019): Empirical formulations for estimation of ultimate strength of cracked continuous unstiffened plates used in ship structure under in-plane longitudinal compression. Engineering Failure Analysis, 100, 470–84.10.1016/j.engfailanal.2019.02.051
- 22. Xu M. C., Garbatov Y., Guedes Soares C. (2014): Residual ultimate strength assessment of stiffened panels with locked cracks. Thin-Walled Structures, 85, 398–410.10.1016/j.tws.2014.09.011
- 23. Daniel C. (1973): One-at-a-Time Plans. Journal of the American Statistical Association, 68, 353–60.10.1080/01621459.1973.10482433
- 24. Wu C.-F., Hamada M. (2009): Experiments: planning, analysis, and optimisation, Wiley.
- 25. ANSYS (2019): Online Manuals, Release 19.
- 26. International Association of Classification Societies (2018): Common Structural Rules (BC & OT).
- 27. Smith S. (1977): Influence of local compressive failure on ultimate longitudinal strength of a ship’s hull. Proceedings of International Symposium on Practical Design in Shipbuilding, 73–9.
- 28. Tekgoz M., Garbatov Y., Guedes Soares C. (2013): Finite element modelling of the ultimate strength of stiffened plates with residual stresses. In: Guedes Soares C., Romanoff J. (eds.), Analysis and Design of Marine Structures, CRC Press, pp. 309–17.10.1201/b15120-42
- 29. Tekgoz M., Garbatov Y. (2013): Ultimate strength of a plate accounting for shakedown effect and corrosion degradation. In: Guedes Soares C., López Peña F. (eds.), Developments in Maritime Transport and Exploitation of Sea Resources, CRC Press, pp. 395–403.10.1201/b15813-49
- 30. Kim U.-N., Choe I.-H., Paik J. K. (2009): Buckling and ultimate strength of perforated plate panels subject to axial compression: experimental and numerical investigations with design formulations. Ships and Offshore Structures, 4, 337–61.10.1080/17445300902990606
- 31. Faulkner D. (1975): A review of effective plating for use in the analysis of stiffened plating in bending and compression. Journal of Ship Research, 19, 1–17.10.5957/jsr.1975.19.1.1
- 32. Montgomery D. C. (2006): Design and Analysis of Experiments, John Wiley & Sons Ltd, USA.
- 33. Zhang S. (2016): A review and study on ultimate strength of steel plates and stiffened panels in axial compression. Ships and Offshore Structures, 11(1), 81-91.
- 34. Daniel C. (1959): Use of half-normal plots in interpreting factorial two-level experiments. Technometrics, 1, 311–41.10.1080/00401706.1959.10489866
- 35. Gunst R. F., Myers R. H., Montgomery D. C. (1996): Response surface methodology: Process and product optimisation using designed experiments. Technometrics, 38, 285.10.2307/1270613
- 36. Paik J. K., Thayamballi A. K., Lee J. M. (2004): Effect of initial deflection shape on the ultimate strength behavior of welded steel plates under biaxial compressive loads. Journal of Ship Research, 48, 45–60.10.5957/jsr.2004.48.1.45
- 37. Tall L., Rao N. (1961): Residual stresses in welded plates. Welding Journal, Research Supplement, 40(1), 468–480.