Have a personal or library account? Click to login
Centrifugal Compressor Performance Improvement through Multi Splitter Impeller Cover

Centrifugal Compressor Performance Improvement through Multi Splitter Impeller

Open Access
|Jul 2019

References

  1. 1. C. Xu, R. S. Amano: Numerical simulation of the aerodynamic effects on sweep compressor blades, 2004, IGTI-2004-53008.
  2. 2. C. Xu and R. S. Amano: A study of a single stage centrifugal compressor, ASME Electric Power Conference 2006, PWR2006-88023, Georgia World Congress Centre, Atlanta, GA.
  3. 3. C. Xu and R. S. Amano: Computational analysis of Scroll tongue shapes to compressor performance by using different turbulence models, 2007, GT2007-28224.
  4. 4. C. Xu and R. S. Amano: Development of a low flow coefficient single stage centrifugal compressor, International Journal for Computational Methods in Engineering Science and Mechanics, 2009, 10(4), 282–289.10.1080/15502280902939460
  5. 5. C. Xu, R. S. Amano: Study of the flow in a centrifugal compressor, Int. J. of Fluid Machinery and System, 2010, 3(3), 260–270.10.5293/IJFMS.2010.3.3.260
  6. 6. C. Xu, R. S. Amano: Meridional considerations of the centrifugal compressor development, International Journal of Rotating Machinery, 2012, 1-11, doi:10.1155/2012/518381.10.1155/2012/518381
  7. 7. C. Xu, R. S. Amano: Empirical design considerations for industrial centrifugal compressors. International Journal of Rotating Machinery, 2012, 1-15, doi./10.1155/2012/184061.10.1155/2012/184061
  8. 8. Dean R.: On the unresolved fluid dynamics of the centrifugal compressor, Advanced Centrifugal Compressors, 1971, ASME Publications.
  9. 9. Fradin, C: Investigation of the three-dimensional flow near the exit of two backswept transonic centrifugal impellers, Proc. of the Eighth International Symposium in Air Breathing Engines, 1987, 149–155.
  10. 10. Hathaway M. J., Chriss R. M., Wood J. R., Strazisar A. J.: Experimental and computational investigation of the NASA low-speed centrifugal compressor flow field, ASME J. of Turbomachinery, 1993, Vol. 115, pp. 527–542.10.1115/1.2929285
  11. 11. Hirofumi Hattori, Tomoya Houra, Amane Kono and Shota Yoshikawa: Computational fluid dynamics study for improvement of prediction of various thermally stratified turbulent boundary layers, J. Energy Resour. Technol., 2017, 139 (5): 051209-051209-8.10.1115/1.4036177
  12. 12. Kano F., Tazawa N., Fukao Y.: Aerodynamic performance of large centrifugal compressors, 1982, ASME Paper 82-GT-17.10.4271/820328
  13. 13. Krain H.: A study on centrifugal impeller and diffuser flow, Transactions of the ASME, 1981, Vol. 103, pp. 688–697.10.1115/1.3230791
  14. 14. Masanao Kaneko, Hoshio Tsujita: Influences of tip leakage flows discharged from main and splitter blades on flow field in transonic centrifugal compressor stage, 2018, ASME Turbo Expo 2018, Vol. 2B, Paper GT 2018-75345.10.1115/GT2018-75345
  15. 15. M. Zangeneh: On 3D design of centrifugal compressor impellers with splitter blades, 1998, ASME paper 98-GT-507.10.1115/98-GT-507
  16. 16. McKain T. F., Holbrook G. J.: Coordinates for a high performance 4:1 pressure ratio centrifugal compressor, NASA Contract NAS 3-23268, 1982, (to be published as a NASA CR).
  17. 17. Millour, V.: 3D Flow Computations in a Centrifugal Compressor with Splitter Blade Including Viscous Effect Simulation, 16th Congress, International Council for Aeronautical Societies, 1988, 1, 842–847.
  18. 18. Moore J., Moore J. G., Timmis, P. H.: Performance evaluation of centrifugal compressor impellers using three-dimensional viscous flow calculations, J. of Engineering for Gas Turbines and Power, 1984, Vol. 106, pp. 475–481.10.1115/1.3239590
  19. 19. Ona, M., Kawamoto, H., Yamamoto, Y.: Approach to high performance transonic centrifugal compressor, 2002, AIAA 2002–3536.10.2514/6.2002-3536
  20. 20. Skoch G. J., Prahst P. S., Wernet M. P., Wood J. R., Strazisar A. J.: Laser anemometer measurements of the flow field in a 4:1 pressure ratio centrifugal impeller, 1997, ASME Paper 97-GT-342.10.1115/97-GT-342
  21. 21. Tamaki, H., Yamaguchi, S., Nakao, H., Yamaguchi, H., Ishida, K., Mitsubori, K.: Development of compressor for high-pressure ratio turbocharger, 1998, IMechE C554/002.
  22. 22. Teipel I. and Wiedermann, A.: Computation of flow fields in centrifugal compressor diffusers with splitter vanes, Proc. of the International Gas Turbine Congress, 1987, 2, 311–317.
  23. 23. Vavra, M. H.: Basic Elements of Advanced Design of Radial-Flow Compressors, AGARD Lecture Series No. 89 on “Advanced Compressors, 1970”.
DOI: https://doi.org/10.2478/pomr-2019-0020 | Journal eISSN: 2083-7429 | Journal ISSN: 1233-2585
Language: English
Page range: 6 - 14
Published on: Jul 12, 2019
Published by: Gdansk University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 4 times per year

© 2019 Adil Malik, Qun Zheng, Shafiq R. Qureshi, Salman A. Ahmed, D. KB Gambo, published by Gdansk University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.