References
- 1. Andersen, K.H., Murff, J.D., Randolph, M., Clukey, E.C., Erbrich, C.T., Jostad, H.P., Hansen, B., Aubeny, C.P., Sharma, P., Supachawarote, C., 2005. Suction anchors for deepwater applications. In: Proceedings of the International Symposium on Frontiers in Offshore Geotechnics, 3-30.
- 2. Cella, P., 1999. Methodology for exact solution of catenary. Journal of Structural Engineering, 125(12): 1451-1453.
- 3. Chen, X.H., Zhang, J., Johnson, P., Irani, M., 2001. Dynamic analysis of mooring lines with inserted springs. Applied Ocean Research 23, 277-284.
- 4. Cheng, M.Y., Cao, M.T., Tran, D.H, 2014. A hybrid fuzzy inference model based on RBFNN and artificial bee colony for predicting the uplift capacity of suction caissons. Automation in Construction 41, 60-69.
- 5. Choi, Y., Kim, B., Kwon, O., Youn, H., 2014. Horizontal pullout capacity of steel chain embedded in sand. Advances in Soil Dynamics and Foundation Engineering GSP, 240, 500-508.
- 6. Choo, Y.I., Casarella, M.J., 1971. Hydrodynamic resistance of towed cables. Journal of Hydronautics, 126-131.
- 7. DeCew, J., Tsukrov, I., Risso, A., Swift, M.R., Celikkol, B., 2010. Modeling of dynamic behavior of a single-point moored submersible fish cage under currents. Aquacultural Engineering 43(2), 38-45.
- 8. Degenkamp, G., Dutta,A., 1989. Soil resistances to embedded anchor chain in soft clay. Journal of Geotechnical Engineering 115(10), 1420-1438.
- 9. Gault, J.A., Cox, W.R., 1974. Method for predicting geometry and load distribution in an anchor chain from a single point mooring buoy to a buried anchorage. In: Proceedings of 6th Annual Offshore Technology Conference. Houston, Texas, USA, 309-318.
- 10. Guo, Z., Wang, L.Z., Yuan, F., 2016. Quasi-static analysis of the multi-component mooring line for deeply embedde danchors. Journal of Offshore Mechanics and Arctic Engineering, 138(1), paper No: OMAE-11-1097.
- 11. Hall, M., Goupee, A., 2015. Validation of a lumped-mass mooring line model with DeepCwind semisubmersible model test data. Ocean Engineering 104, 590-603.
- 12. Huang, X.H., Guo, G.X., Tao, Q.Y., Hu, Y., Liu, H.Y., Wang, S.M., Hao, S.H., 2016. Numerical simulation of deformations and forces of a floating fish cage collar in waves. Aquacultural Engineering 74, 111-119.
- 13. Huang, C.C., Tang, H.H., Liu, J.Y., 2006. Dynamic analysis of net cage structures for marine aquaculture: Numerical simulation and model testing. Aquacultural Engineering 35(3), 258-270.
- 14. Huang, C.C., Tang, H.J., Wang, B.S., 2010. Numerical modeling for an In Situ single-point-mooring cage system. IEEE Journal of Oceanic Engineering 35(3), 565-573.
- 15. Kapetsky, J.M., Aguilar-Manjarrez, J., Jenness, J., 2013. A global assessment pf potential for offshore mariculture development from a spatial perspective. FAO Fisheries and Aquaculture Technical Paper No. 549. Rome, FAO. 181 pp.
- 16. Kim, T., Lee, J., Fredriksson, D.W., DeCew, J., Drach, A., Moon, K., 2014. Engineering analysis of a submersible abalone aquaculture cage system for deployment in exposed marine environments. Aquacultural Engineering 63, 72-88.
- 17. Liu, H.X., Liu, C.L., Zhao, Y.B., Wang, C., 2014. Comparative study of reverse catenary properties of the installation line for drag anchors. Applied Ocean Research 48, 42-54.
- 18. Masciola, M.D., Nahon, M., Driscoll, F.R., 2011. Static analysis of the lumped mass cable model using a shooting algorithm. ASCE Journal of Waterway, Port, Coastal, and Ocean Engineering
- 19. Neubecker, S.R., Randolph, M.F., 1995. Profile and frictional capacity of embedded anchor chains. Journal of Geotechnical Engineering 121(11), 797-803.
- 20. O’Loughlin, C., White, D., Stanier, S., 2015. Novel anchoring solutions for FLNG-Opportunities driven by scale. In: Proceedings of the 47th Annual Offshore Technology Conference, Houston, Texas, USA, OTC-26032-MS.
- 21. Rocha, M., Schnaid, F., Rocha, C., Amaral, C., 2016. Inverse catenary load attenuation along embedded ground chain of mooring lines. Ocean Engineering 122, 215-226.
- 22. Shainee, M., DeCew, J., Leira, B.J., Ellingsen, H., Fredheim, A., 2013. Numerical simulation of a self-submersible SPM cage system in regular waves with following currents. Aquacultural Engineering 54, 29-37.
- 23. Skempton, A.W., 1951. The bearing capacity of clays. Building Research Congress, Division 1, Part 3, London, 180-189.
- 24. Surendran, S., Goutam, M., 2009. Reduction in the dynamic amplitudes of moored cable systems. Ships and Offshore Structures 4(2), 145-163.
- 25. Tang, H.J., Huang, C.C., Chen, W.M., 2011. Dynamics of dual pontoon floating structure for cage aquaculture in a two-dimensional numerical wave tank. Journal of Fluids and Structures 27, 918-936.
- 26. Vivatrat, V., Valent, P.J., Ponterio, A.A., 1982. The influence of chain friction on anchor pile design. In: Proceedings of the 14th Annual Offshore Technology Conference, Houston, Texas, USA, 153-163.
- 27. Wang, L.Z., Guo, Z.,Yuan, F., 2010a. Quasi-static three dimensional analysis of suction anchor mooring system. Ocean Engineering 37, 1127-1138.
- 28. Wang, L.Z., Guo, Z.,Yuan, F., 2010b. Three-dimensional interaction between anchor chain and seabed. Applied Ocean Research 32, 404-413.
- 29. Xiong, L.Z., Yang, J.M., Zhao, W.H., 2016. Dynamic of a taut mooring line accounting for the embedded anchor chains. Ocean Engineering 121, 403-413.
- 30. Xu, T.J., 2014. Hydrodynamics of net cage group in the open sea. Doctoral Thesis. Dalian University of Technology.
- 31. Xu, T.J., Dong, G.H., Li, Y.C., Guo, W.J., 2014. Numerical study of a self-submersible single-point mooring gravity cage in combined wave-current flow. Applied Ocean Research 48, 66-79.
- 32. Xu, T.J., Zhao, Y.P., Dong, G.H., Gui, F.K., 2013. Analysis of hydrodynamic behavior of a submerisible net cage and mooring system in waves and current. Applied Ocean Research 42, 155-167.
- 33. Yen, B.C., Tofani, G.D., 1984. Soil resistance to stud link chain. In: Proceedings of 16th Annual Offshore Technology Conference, Houston, Texas, USA, OTC 4769, 1-10.
- 34. Zhao, Y.P., Bi, C.W., Chen, C.P., Li, Y.C., Dong, G.H., 2015. Experimental study on flow velocity and mooring loads for multiple net cages in steady current. Aquacultural Engineering 67, 24-31.