References
- 1. T. Tjelta, “Geotechnical experience from the installation of Europipe Jacket with bucket caissons,” in Proc. 27th AOTC, Houston, America, pp. 897-908, 1995.
- 2. M. N. Tran, and M. F. Randolph, “Variation of suction pressure during caisson installation in sand,” Geotechnique, vol.58, no.1, pp. 1-11, 2008.
- 3. R. D. Zhu, H. Q. Gao, and X. B. Ma, “The model experiment studies of model’s press installation and suction installation of bucket caisson on the platform in the sea,” Coastal Engineering, vol. 18, pp. 60-66, 1999.
- 4. J. J. Lian, F. Chen, and H. Wang, “Laboratory tests on soil-skirt interaction and installation resistance of suction caissons during installation in sand,” Ocean Engineering, vol.1, no.13, pp.1-13, 2014.
- 5. M. Senders, and M. F. Randolph, “CPT-based method for the installation of suction caissons in sand,” Journal of Geotechnical and Geo environmental Engineering, vol.135, no.1, pp. 14-25, 2009.
- 6. T. Feld, “Suction buckets, a new innovative caisson concept, applied to offshore wind turbines,” Ph.D. thesis, Aalborg University, Aalborg, Denmark, 2001.
- 7. D. Senpere, and G.A. Auvergne, “Suction caisson piles approve alternative to driving or drilling,” in Proc. 14th AOTC, Houston, USA, pp. 483-493, 1982.
- 8. S. E. Gharbawy, and R. E. Olson, “Suction Caissons Installations for Deep Gulf of Mexico Applications,” pp. 747-754, 1999.
- 9. N. Manh Tran, and F. Mark, “Randolph. Experimental study of suction installation of caissons in dense sand,” in Proc. 23rd ICOM-AE, Canada, pp.1-8, 2004.
- 10. P. Kyuho, and S. Rodrigo, “Effect of Pile Installation Method on Pipe Pile Behavior in Sands,” Geotechnical Testing Journal, vol. 27, no. 1, pp. 1-11, 2004.
- 11. H.Y. Ding, Z. Y. Liu, and X. Chen, “Model tests on soil plug formation in suction caisson for silty clay,” Chinese Journal of Geotechnical Engineering, vol. 23, no. 4, pp.441-444, 2001.
- 12. W. Guo, and J. Chu, “Suction caisson installation in shallow water: model tests and prediction,” in Proc. 18th ICSMGE, Paris, France, pp. 1999-2002.
- 13. S. L. Yang, A.L. Li, and J. F. Qi, “Experimental study of bucket caisson during installation by suction,” Chinese Journal of Geotechnical Engineering, vol. 25, no. 2, pp.236-238, 2003.
- 14. D. Y. Li, Y. K. Zhang, and Y. F. Gao, “Model tests on installation of suction caissons in medium-coarse sand,” Chinese Journal of Geotechnical Engineering, vol. 34, no. 12, pp. 2277-2283, 2012.
- 15. L. Q. Yu, Study on the installation behavior of suction caisson and the dynamic properties of offshore wind turbine structure,” Ph.D. thesis, Zhe Jiang University, Zhejiang, China, 2014.
- 16. G. T. Houlsby, and B. W. Byrne, “Design procedures for installation of suction caissons in clay and other materials,” Geotechnical Engineering, vol. 158, no. 2, pp. 75-82, 2005.
- 17. S. M. Junaideen, L. G. Then, K. T. Law, C. F. Lee, and Z. Q. Yue, “Laboratory study of soil-nail interaction in loose, completely decomposed granite,” Canadian Geotechnical Journal, vol. 41, no. 2, pp. 274-286, 2004.
- 18. Design and analysis of station keeping systems for floating structures, API RP-2SK, 2005.
- 19. Geotechnical design and installation of suction caissons in clay, DNV RP-E303, 2005.
- 20. A. Muller, and M. Debbah, “Random matrix theory tutorial. Introduction to deterministic equivalents,” TRAITEMENT DU SIGNAL, vol. 33, no. 2-3, pp. 223-248, 2016.
- 21. H. G. B. Allersma, J. R. Hogervorst, and M. Pimoulle, “Centrifuge modeling of suction pile installation using a percussion technique,” in Proc. 11th IOPE, Norway, pp.620-625, 2001.
- 22. H. G. B. Allersma, J. R. Hogervorst, and M. Pimoulle, “Centrifuge and numerical modelling of horizontally loaded suction piles,” in Proc. 9th. Int. Offshore and Polar Eng. Conference, ISOPE99, pp. 711-717.
- 23. Z. Guo, L. Z. Wang, and F. Yuan, “An experimental investigation of insertion resistance and soil heave during caisson installation in soft clay,” Ocean Engineering, vol. 29, no.1, pp. 9-17, 2011.
- 24. F. Chen, and J. J. Lian, “Model tests on bucket-soil interaction during installation of bucket caisson in silt sand.” Chinese Journal of Geotechnical Engineering, vol.37, no. 4, pp. 683-691, 2015.
- 25. Y. Li, N. P. Yi, X. G. Zhang, and S. C. Xu, “Numericalinvestigation on the effect of variation of water level on the stability of soil-cement column reinforced waterway side slope.” International Journal of Heat and Technology, vol. 36, no. 1, pp. 344-352, 2018.
- 26. C. A. Louis, “A study of groundwater flow in jointed rock and its influence on the stability of rock masses,” Imperial College of Science and Technology, London, 1969.
- 27. P. Zamanian, and M. Kasiri, “Investigation of Stage Photography in Jee Lee’s Works and Comparing them With The Works Of Sandy Skoglund,” Acta Electronica Malaysia, vol. 2, no. 1, pp. 01-06, 2018.
- 28. K. S. N. H. Ku Mohd Razali, S. Kasim, R. Hassan, H. Mahdin, A. A. Ramli, M. F. Md Fudzee, and M. A. Salamat, “Lensalyza Photography Studio Reservation System,” Acta Electronica Malaysia, vol. 2, no. 2, pp. 06-09, 2018.
- 29. Z. G. He, X. N. Gu, X. Y. Sun, J. Liu, and B. S. Wang, “An efficient pseudo-potential multiphase lattice Boltzmann simulation model for three-dimensional multiphase flows,” Acta Mechanica Malaysia, vol. 1, no. 1, pp. 08-10, 2017.
- 30. R. Vasanthakumari, and P. Pondy, “Mixed convection of silver and titanium dioxide nanofluids along inclined stretching sheet in presence of MHD with heat generation and suction effect,” Mathematical Modelling of Engineering Problems, Vol. 5, No. 2, pp. 123-129, 2018.
- 31. M. R. Rozainy, M. A. Z. Khairi, A.W. I. Abustan, S. S. Rahim, and M. N. Nasehir Khan, “A study on the selection of suitable sites for integrated smart trapper system installation (InSmarts),” Engineering Heritage Journal, vol. 1, no. 1, pp. 06-10, 2017.
- 32. H. Halim, R. Abdullah, M. J. Mohd Nor, H. Abdul Aziz, and N. Abd Rahman, “Comparison Between Measured Traffic Noise in Klang Valley, Malaysia And Existing Prediction Models,” Engineering Heritage Journal, vol. 1, no. 2, pp. 10-14, 2017.