References
- 1. https://www.statista.com/chart/3354/large-ship-losses -reach-lowest-point-in-a-decade/
- 2. J. Caldwell, “Ultimate longitudinal strength,” Trans Royal Inst Nav Arch, Vol. 107, pp. 411-430, 1965.
- 3. C. Smith, “Influence of Local Compressive Failure on Ultimate Longitudinal Strength of a Ship’s Hull,” Proc. Int. Symp. On Practical Design in Shipbuilding (PRADS), pp. 73-79, 1977.
- 4. Z. Pei, and M. Fujikubo, “Application of idealized structural unit method to progressive collapse analysis of ship’s hull girder under longitudinal bending,” International Society of Offshore and Polar Engineers, pp. 766-773, 2005.
- 5. H. K. K. Amlashi, and T. Moan, “Ultimate strength analysis of a bulk carrier hull girder under alternate hold loading condition - A case study: Part 1: Nonlinear finite element modelling and ultimate hull girder capacity,” Marine Structures, Vol. 21, No. 4, pp. 327-352, 2008.
- 6. E. Lehmann, “Discussion on report of Committee III. 1: ultimate strength,” In: Proceedings of 16th ISSC. 3, Southampton, UK, pp. 121-131.
- 7. T. Yao, M. Fujikubo, and K. Iijima, “Total system including capacity calculation applying ISUM/FEM and loads calculation for progressive collapse analysis of ship’s hull girder in longitudinal bending,” Renaissance Quarterly, Vol. 53, No. 2, pp. 706-713, 2009.
- 8. Z. Pei, K. Iijima, M. Fujikubo, Y. Tanaka, S. Tanaka, S. Okazawa, and T. Yao, “Collapse Analysis of a Bulk Carrier under Alternate Heavy Loading Conditions,” Int. Journal of Offshore and Polar Engineering, pp. 224-231, 2013.
- 9. Z. Pei, K. Iijima, and M. Fujikubo, “Simulation on progressive collapse behavior of whole ship model under extreme waves using idealized structural unit method,” Marine Structures, Vol. 40, pp. 104-133, 2015.
- 10. P. A. Lakshmynarayanana, P. Temarel, and Z. Chen, “Hydro elastic analysis of a flexible barge in regular waves using coupled CFD-FEM modelling,” Marine Structures, pp. 95, 2015.
- 11. D. K. Kim, H. P. Dong, and B. K. Han, “Lateral pressure effects on the progressive hull collapse behavior of a Suezmax-class tanker under vertical bending moments,” Ocean Engineering, Vol. 63, No, 4, pp. 112-121, 2013.
- 12. W. Xu, W. Duan, and D. Han, “Investigation into the dynamic collapse behavior of a bulk carrier under extreme wave loads,” Ocean Engineering, Vol. 106, pp. 115-127, 2015.
- 13. L. Chen, and C. X. Wang, “Green Development Assessment of Smart City Based on PP-BP Intelligent Integrated and Future Prospect of Big Data,” Acta Electronica Malaysia, Vol. 1, No. 1, pp. 01-04, 2017.
- 14. Z. G. He, X. A. Gu, X. Y. Sun, J. Liu, and B. S. Wang, “A coupled immersed boundary method for simulating multiphase flows,” Acta Electronica Malaysia, Vol. 1, No. 1, pp. 05-08, 2017.
- 15. X. N. Gu, Z. G. He, X. Y. Sun, J. Liu, and B. S. Wang, “Algebraic dynamic multilevel (ADM) method for compositional multi-phase flow simulation,” Acta Mechanica Malaysia, Vol. 1, No. 1, pp. 01-03, 2017.
- 16. X. N. Gu, Z. G. He, X. Y. Sun, J. Liu, and B. S. Wang, “A Twodimensional lattice Boltzmann method for compressible flows,” Acta Mechanica Malaysia, Vol. 1, No. 1, pp. 04-07, 2017.
- 17. N. A. Yaacof, N. Qamaruzzaman, and Y. Yusup, “Comparison method of odour impact evaluation using calpuff dispersion modelling and on-site odour monitoring,” Engineering Heritage Journal, Vol. 1, No. 1, pp. 01-05, 2017.
- 18. M. R. Rozainy, M. A. Z. Khairi, A.W. I. Abustan, S. S. Rahim, and M. N. Nasehir Khan, “A study on the selection of suitable sites for integrated smart trapper system installation (InSmarts),” Engineering Heritage Journal, Vol. 1, No. 1, pp. 06-10, 2017.