References
- 1. Blount D. L., Fox D. L.: Small Craft Power Prediction, Marine Technology, Vol. 13, No.1, 1976
- 2. Blount D.: Prospects for Hard Chine, Monohull Vessels, Proceedings of the Second Int. Conf. on Fast Sea Transportation - FAST ’93, Yokohama, 1993
- 3. Clement P. E.: Analyzing the Stepless Planing Boat, Int. Shipbuilding Progress, No. 33, 1957
- 4. Clement P. E., Blount D.: Resistance Tests of a Systematic Series of Planing Hull Forms, Trans. SNAME, Vol. 71, 1963
- 5. Delgado-Saldivar G.: Experimental Investigation of a New Series of Planing Hulls, M.Sc. Thesis, Technical University of Nova Scotia, Halifax, Nova Scotia, 1993
- 6. Garo R., Datla R., Imas L.: Numerical Simulation of Planing Hull Hydrodynamics, SNAME’s Third Chesapeake Powerboat Symposium, Annapolis, 2012
- 7. Hubble E. N.: Resistance of Hard-Chine Stepless Planing Craft with Systematic Variation of Hull Form, Longitudinal Centre of Gravity and Loading, DTNSRDC R&D Report 4307, 1974
- 8. Keuning, J. A., Gerritsma, J.: Resistance Tests of a Series of Planing Hull Forms with 25 Degrees Deadrise Angle, Int. Shipbuilding Progress, Vol. 29, No. 337, 1982
- 9. Keuning J. A., Gerritsma J., Terwisga P. F.: Resistance Tests of a Series Planing Hull Forma With 30o Deadrise Angle, and a Calculation Model Based on This and Similar Systematic Series, Int. Shipbuilding Progress, Vol. 40, No. 424, 1993
- 10. Kowalyshyn D. H., Metclaf B.: A USCG Systematic Series of High Speed Planing Hulls, Trans. SNAME, Vol. 114, 2006
- 11. Macpherson D.: Ten Commandments of Reliable Speed Prediction, Proceedings of Small Craft Resistance and Propulsion Symposium, Michigan, 1996
- 12. Miljkovic, Z.: Systems of Artificial Neural Networks in Production Technologies, University of Belgrade, Faculty of Mechanical Engineering, Belgrade, ISBN 86-7083-455-3 (in Serbian), 2003
- 13. Moore W., Hawkins F.: Planing Boat Scale Effects on Trim and Drag (TMB Series 56), NSRDC Technical Note No. 128, 1969
- 14. Morabito M., Snodgrass J.: The Use of Small Model Testing and Full Scale Trials in the Design of Motor Yacht, SNAME’s Third Chesapeake Powerboat Symposium, Annapolis, 2012
- 15. Radojcic D.: An Approximate Method for Calculation of Resistance and Trim of the Planing Hulls, Ship Science Report No 23, Faculty of Engineering and Applied Science, University of Southampton, Southampton, 1985
- 16. Radojcic, D.: An Engineering Approach to Predicting the Hydrodynamic Performance of Planing Craft Using Computer Techniques, Trans. RINA, Vol. 133, 1991
- 17. Radojcic D., Rodic T., Kostic N.: Resistance and Trim Predictions for the NPL High Speed Round Bilge Displacement Hull Series, RINA’s Int. Conf. on Power, Performance & Operability of Small Craft, Southampton, 1997
- 18. Rojas R.: Neural Networks - A Systematic Introduction, Springer-Velrag, Berlin, 1996
- 19. Savander B. R., Maki K. J., Land J.: The Effects of Deadrise Variation on Steady Planing Hull Performance, SNAME’s Second Chesapeake Powerboat Symp., Annapolis, 2010
- 20. Savitsky D.: Hydrodynamic Design of Planing Hulls, Marine Technology, Vol. 1, No. 1, 1964
- 21. Savitsky D., Delorme M., Datla R.: Inclusion of Whisper-Spray Drag in Performance Prediction Method for Planing Hulls, New York Metropolitan Section of SNAME, 2006
- 22. Savitsky D.: The Effect of Bottom Warp on the Performance of Planing Hulls, SNAME’s Third Chesapeake Powerboat Symposium, Annapolis, 2012
- 23. Schleicher D., Bowles B.: Two Speed Gears, Professional Boat Builder, No. 80, Dec/Jan, 2003
- 24. Simic A.: Energy Efficiency of Inland Self-Propelled Cargo Vessels, Doctoral dissertation, University of Belgrade, Faculty of Mechanical Engineering, Belgrade (in Serbian), 2012
- 25. SNAME Small Craft Data Sheets - Technical and Research Bulletin
- 26. Tanaka H., Nakato M., Nakatake K., Ueda T., Araki S.: Cooperative Resistance Tests with Geosim Models of a High- Speed Semi-displacement Craft, Journal of SNAJ, Vol. 169, 1991.
- 27. Taunton D. J., Hudson D. A., Shenoi R. A.: Characteristics of a Series of High Speed Hard Chine Planing Hulls - Part 1: Performance in Calm Water, Trans. RINA, Vol. 152, Part B2, 2010
- 28. Zurek S.: LabVIEW as a tool for measurements, batch data manipulations and artificial neural network predictions, National Instruments, Curriculum Paper Contest, Przegląd Elektrotechniczny, Nr 4/2007, 2007.