Optimization and modeling of sinter-brazing of porous copper-based composites joined to a wrought steel substrate
By: H. Ghazanfari and H. Hassanzadeh
References
- Yelong Xiao, Zhongyi Zhang, Pingping Yao, Kunyang Fan, Haibin Zhou, Taimin Gong, Lin Zhao, and Minwen Deng. Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains. Tribology International, 119:585–592, 2018.
- Ayorinde Tayo Olanipekun, Nthabiseng Beauty Maledi, and Peter Madindwa Mashinini. The synergy between powder metallurgy processes and welding of metallic alloy: A review. Powder Metallurgy, 63(4):254–267, 2020.
- K. Rajesh Kannan, R. Vaira Vignesh, V. Dhinakaran, N. Jeyaprakash, and M. Govindaraju. Joining of the functionally gradient friction material to the backing plate for wind turbines using sinter-brazing technique. Materials Letters, 378:137569, 2025.
- Kyle H. Bear, Glenn Rishel, Brian Smith, and Stephen L. Feldbauer. Applying brazing fundamentals to the sinter brazing process. Welding Journal, 96(5):44–47, May 2017.
- Herbert Danninger, Jose Maria Garmendia Gutierrez, Raimund Ratzi, and Josef Seyrkammer. Reactive sinter brazing of ferrous pm parts using iron-carbon fillers. Powder Metallurgy Progress, 10(3):121–132, 2010.
- Richard Lucas. Ueber das zeitgesetz des kapillaren aufstiegs von fl¨ussigkeiten. Kolloid-Zeitschrift, 23(1):15–22, 1918.
- Edward W. Washburn. The dynamics of capillary flow. Physical Review, 17(3):273–283, 1921.
- Mian Muhammad Sami, Tuan Zaharinie, Farazila Yusof, and Tadashi Ariga. Investigation on strength and microstructural evolution of porous cu/cu brazed joints using Cu-Ni-Sn-P filler. Metals, 10(3):416, 2020.
- Nur Amirah Mohd Zahri, Farazila Yusof, Yukio Miyashita, Tadashi Ariga, A. S. Md. Abdul Haseeb, Nashrah Hani Jamadon, and Nazatul Liana Sukiman. Brazing of porous copper foam/copper with amorphous cu-9.7sn-5.7ni-7.0p (wt%) filler metal: interfacial microstructure and diffusion behavior. Welding in the World, 64:209–217, 2020.
- Niwat Mookam, Prajak Jattakul, Tadashi Ariga, and Kannachai Kanlayasiri. A new technique for brazing porous copper to copper substrate using CuNiSnP amorphous filler metal. Journal of Materials Engineering and Performance, 34:25161–25175, 2025.
- C. W. Hirt and B. D. Nichols. Volume of fluid (vof) method for the dynamics of free boundaries. Journal of Computational Physics, 39(1):201–225, 1981.
- J. U. Brackbill, D. B. Kothe, and C. Zemach. A continuum method for modeling surface tension. Journal of Computational Physics, 100(2):335–354, 1992.
- Liang Chen, Yan Xiang, Di Fang, and Weimin Ma. A numerical study on metallic melt infiltration in porous media and the effect of solidification. Nuclear Engineering and Design, 430:113687, 2024.
- Xibing Li, Wenqiang Xue, Cuicui Yin, Juan Wang, Kaihong Zheng, Yongnan Xiong, and Jun Xu. Numerical simulation of the infiltration behavior of molten metal in a ceramic porous preform. Physics of Fluids, 37(3):033385, 2025.
- Y. Xiao, Z. Zhang, P. Yao, K. Fan, H. Zhou, T. Gong, L. Zhao, and M. Deng. Mechanical and tribological behaviors of copper metal matrix composites for brake pads used in high-speed trains. Tribology International, 119:585–592, 2018.
- ANSYS, Inc., Canonsburg, PA, USA. GAMBIT Modeling Guide, Release 2.4.6, 2009.
- ANSYS, Inc., Canonsburg, PA, USA. ANSYS Fluent User’s Guide, Release 18.2, 2017.
Language: English
Page range: 1 - 12
Published on: Sep 9, 2026
Published by: Slovak Academy of Sciences, Institute of Materials Research
In partnership with: Paradigm Publishing Services
Related subjects:
© 2026 H. Ghazanfari, H. Hassanzadeh, published by Slovak Academy of Sciences, Institute of Materials Research
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.