Synthesis of Fe-Based Alloy Reinforced with Chromium Carbide Via Sintering of Iron-Ferrochrome Powder Mixture

Yevheniia Kyryliuk; Gennadii Bagliuk; Alla Mamonova; Vitaliy Maslyuk

doi:10.2478/pmp-2021-0003

.blurhash-client-img { display: none !important; }

Synthesis of Fe-Based Alloy Reinforced with Chromium Carbide Via Sintering of Iron-Ferrochrome Powder Mixture

Powder Metallurgy Progress

Volume 21 (2021): Issue 1 (June 2021)

By: Yevheniia Kyryliuk, Gennadii Bagliuk, Alla Mamonova and Vitaliy Maslyuk

Open Access

|Apr 2022

Abstract

The results of the investigation of the structure, phase composition, and properties of the alloy sintered from a mixture of iron (65 %) and high-carbon ferrochrome (35 %) powders are presented in the article. It was shown that sintering of the consolidated specimens results in a substantially heterogeneous structure consisting of two predominant phases: austenitic phase and double ferrochrome carbide. A mechanism is proposed for the dissolution of ferrochrome particles in the iron matrix as follows: M7C3 → M3C (1000÷1150 ºС) → M7C3 (1200÷1250 ºС).

References

[1] Fedorchenko, IM., Frantsevich, IN., Radomyselsky, ID., et al.: Powder metallurgy, materials, technology, properties, applications: Handbook. Kyiv: Nauk. Dumka., 1985, 624. (In Russian).
Search in Google Scholar Back to article
[2] Baglyuk, GA., Poznyak, LA.: Powder Metall. Met. Ceram., vol. 40, no. 1, 2001, p. 34–39.10.1023/A:1011399504008
Search in Google Scholar Back to article
[3] Lu, L., Soda, H., McLean, A.: Mater. Sci. Eng. A., vol. 347, Issues 1–2, 2003, p. 214-222.10.1016/S0921-5093(02)00588-9
Search in Google Scholar Back to article
[4] Herranz, G., Matula, G., Romero, A.: Powder Metallurgy. vol. 60, Issue 2, 2017, p. 120–130.10.1080/00325899.2017.1288778
Search in Google Scholar Back to article
[5] Chang, CM., Chen, YC., Wu, W.: Tribol. Int., vol. 43, isses 5-6, 2010, p. 929–934.10.1016/j.triboint.2009.12.045
Search in Google Scholar Back to article
[6] Yakovenko, RV., Maslyuk, VA., Mamonova, AA., Gripachevskii, AN., Denisenko, NI.: Powder Metall. Met. Ceram., vol. 52, 2014, p. 644–650.10.1007/s11106-014-9571-9
Search in Google Scholar Back to article
[7] Yakovenko, RV., Maslyuk, VA., Gripachevskii, AN., Deimontovich, VB.: Powder Metall. Met. Ceram., vol. 50, 2011, p. 182–188.10.1007/s11106-011-9316-y
Search in Google Scholar Back to article
[8] Tolochin, AI., Laptev, AV., Yakovenko, RV., Maslyuk, VA.: Powder Metall. Met. Ceram., vol. 55, 2017, p. 518–529.10.1007/s11106-017-9835-2
Search in Google Scholar Back to article
[9] Tsikunov, NS., Batyrev, VA., Gripachevskii, AN. et al. A software package for processing the results of quantitative X-ray spectral microanalysis using the ZAF method on a mini-computer. Kyiv: Institute of Metallophysics, Academy of Sciences of the Ukrainian SSR. 1981, p. 40. (In Russian).
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/pmp-2021-0003 | Journal eISSN: 1339-4533 | Journal ISSN: 1335-8987

Journal RSS Feed

Language: English

Page range: 18 - 26

Published on: Apr 13, 2022

Published by: Slovak Academy of Sciences, Institute of Materials Research

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

powder,

iron,

Related subjects:

Mechanical engineering,

Fundamentals of mechanical engineering,

Bioengineering and biomedical engineering,

Biomedical electronics,

Materials sciences,

Materials sciences, other

© 2022 Yevheniia Kyryliuk, Gennadii Bagliuk, Alla Mamonova, Vitaliy Maslyuk, published by Slovak Academy of Sciences, Institute of Materials Research
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Volume 21 (2021): Issue 1 (June 2021)