References
- Agostini, B., Fabbri, M., Park, J.E., Wojtan, L., Thome, J.R. & Michel, B. (2007). State of The Art of High Heat Flux Cooling Technologies. Heat Transf. Eng. 28(4), 258–281. DOI:10.1080/01457630601117799.
- Arzutug, M.E. & Basci, A.A. (2021). A New Heat Sink Design for Cooling Microprocessors and Investigation of Cooling Performance, Proceedings, Int. Symposium on Applied Science and Enginnering (Proceedings of ISASE 2021), 7–9 April, 2021 (pp. 120-123) Erzurum, Türkiye.
- Al-Tae’y, K.A., Ali, E.H. & Jebur, M.N. (2017). Experimental Investigation of Water Cooled Minichannel Heat Sink for Computer Processing Unit Cooling, Int. J. Eng. Res. Appl. 7-8(1), 38–39. DOI: 10.9790/9622-0708013849.
- Pal, A., Joshi, Y., Beitelmal, M.H., Patel, C.D. & Wenger, T. (2002). Design and Performance Evaluation of a Compact Thermosyphon, IEEE Transactions on Components and Packaking Technologies. 25(4), 601–607. DOI:10.1109/TCAPT.2002.807997.
- Badruddin, I.A., Al-Rashed, A.A., Salman, A.N.J., Khaleed, H.M.T., Ahmed, N.A., Kamangar, S., Yunus Khan, T.M. (2014). Investigation of Discrete Heating At Upper Section of A Porous Annulus. Aust. J. Basic Appl. Sci. 8(24), 283–289.
- Yuki,K. & Suzuki, K. (2011). Applicability of Minichannel Cooling Fins to The Next Generation Power Devices as a Single-Phase-Flow Heat Transfer Device. Trans. Japan Inst. Elect. Power Packaking, 4(1), 52–60. DOI: 10.5104/jiepeng.4.52.
- Dixt, T. & Ghosh, I. (2015). Review of Micro and Mini-Channel Heat Sinks and Heat Exchangers for Single Phase Fluids. Renew. Sust. Energy Rev. 41, 1298–1311. DOI: 10.1016/j. rser.2014.09.024.
- Lee, H. (2010). Thermal Design: Heat sinks, thermoelectrics, heat pipes, compact heat exchangers and solar cells (2nd ed.). John Wiley & Sons Inc.
- Kraus, A.D. & Bar-Cohen, A. (1995). Design and analysis of heat sinks. John Wiley & Sons Inc.
- Carr, J.D. An Examination of CPU Cooling Technologies. Retrieved December 23, 2022, from dsiventures.com/up-contect/uploads/2019/04/CPU-cooling-Technologies.pdf.
- Gayatri, M. and Sreeramulu, D. (2015). Performance of Water and Diluted Ethylene Glycol as Coolants for Electronic Cooling. Int. J. Eng. Res. Appl. 5, 135–140.
- Nikhil, S.S. & Kriplani, V.M. (2013). Review of Heat Transfer Enhancement Techniques in Swirl Flow Using Active and Passive Methods. Int. J. Eng. Res. Tech. 6(1), 86–94.
- Arzutug, M.E. & Yapıcı, S. (2009). Electrochemical Mass Transfer in Impinging Swirl Jets. Ind. Eng. Chem. Res. 48, 1593–1602. DOI: 10.1021/ie0715097.
- Siddique, H., Hoque, Md. S.B. & Ali, M. (2016), Effect of Swirl Flow On Heat Transfer Characteristics In A Circular Pipe. July, 2016 (pp. 1-7). International Conference on Mechanical Engineering: Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015), Dhaka, Bangladesh.
- Biruk, V.V. (1993). Vortex Effect of Energetic Gas Separation in Aviation Technics and Technologies, Izv. Vuzov. Aviac. Tekhn. 1(2), 20–23.
- Khatalov, A.A. (1989). Theory and experience of swirl flow. Naukova Dumka Press.
- Kakac, S. & Paramuanjaroenkij, A. (2009). Review of Convective Heat Transfer Enhancement with Fluids. Int. J. Heat and Mass Transf. 52, 3187–3196. DOI: 10.1016/j.ijheatmasstransfer.2009.02.006.
- Sara, O.N., İçer, F., Yapici, S. & Sahin, B. (2011). Effect of Suspended CuO Nanoparticles on Mass Transfer to a Rotating Disc Electrode. Exp. Therm. Fluid Sci. 35, 558–564. DOI: 10.1016/j.expthermflusci.2010.12.011.
- Patuleanu, L., Manolache-rusu, I.C., Andronic, F. & Radion, I. (2014). Heat Transfer Through Mini and Micro Circular Channels of CPU’s Cooling Systems. J. Eng. Stud. Res. 20(1), 76–81. DOI: 10.1117/12.823670.
- Al Shdaifat, M.Y., Zulküfli, R., Sopian, K. & Salih, A.A. (2020). Thermal and Hydraulic Performance of CuO/Water Nanofluids: A Review, Micromachines. 11(416), 1–19. DOI:10.3390/mi11040416.
- Heris, S.Z., Etemad, S.G. & Esfahany, M.N. (2006). Experimental Investigation of Oxide Nanofluids Laminer Flow Convective Heat Transfer. Int. Commun. Heat Mass Transf. 33, 529–535. DOI: 10.1016/j.icheatmasstransfer.2006.01.005.
- Caprani, A., Fricquelmont-Laizas, M.M. & Peranneau, P. (1988). Mass Transfer in Laminer Flow at a Rotating Disc Electrode in Suspensions of Inert Particles. J. Electrochem. Soc. 135(3), 635–642.
- Masuda, H., Ebata, A., Teramae, K. & Hishinuma, N. (1993). Alterlation of Thermal Conductivity and Viscosity Liquid by Dispersing Ultra-fine Particles (Dispersion of g-Al2O3, SiO2 and TiO2 ultra- fine particles). Netsu Bussei. 7, 227–233. DOI: 10.2963/jjtp.7.227.
- Lee, S., Choi, S.U.S., Li, S. & Eastman, J.A. (1999). Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles, Trans. ASME, J. Heat Transfer. 121, 280–289. DOI: 10.1115/1.2825978.
- Wang, X., Xu, X. & Choi, S.U.S. (1999). Thermal Conductivity of Nanoparticle-Fluid Mixture. J. Thermophys. Heat Transfer. 13, 474–480. DOI: 10.2514/2.6486.
- Afshari, F. & Muratçobanoğu, B. (2023). Thermal analysis of Fe3O4/water nanofuid in spiral and serpentine mini channels by using experimental and theoretical models. Int. J. Environ. Sci. Technol. 20, 2037–2052. DOI: 10.1007/s13762-022-04119-6.
- Naranjani, B., Roohi, E. & Ebrahimi, A. (2021). Thermal and hydraulic performance analysis of a heat sink with corrugated channels and nanofuid. J. Therm. Anal. Calorim. 146, 2549–2560. DOI: 10.1007/s10973-020-10225-9.
- Ebrahimi, A., Rikhtegar, F., Sabaghan, A. & Roohi, E. (2016). Heat transfer and entropy generation in a microchannel with longitudinal vortex generators using nanofluids. Energy. 101, 190–201. DOI: 10.1016/j.energy.2016.01.102.
- Souida, S., Sahel, D., Ameur, H. & Yousfi, A. (2022). Numerical Simulation of Heat Transfer Behaviors in Conical Pin Fins Heat Sinks. Acta Mechanica Slovaca. 26(3), 32–41. DOI: 10.21496/ams.2023.002.
- Bencherif, B., Sahel, D., Benzeguir, R. & Ameur, H. (2023). Performance Analysis of Central Processing Unit Heat Sinks Fitted with Perforated Techniques and Splitter Inserts. J. Heat Mass Transf. 145(1), 014501. DOI: 10.1115/1.4055815.
- Sahel, D., Bellahcene, L., Yousfi, A. & Subasi, A. (2021). Numerical investigation and optimization of a heat sink having hemispherical pin fins. Int. Comm. Heat Mass Transf. 122, 105133. DOI: 10.1016/j.icheatmasstransfer.2021.105133.
- Çengel, Y.A. (2006). Heat and Mass Transfer- A Practical Approach (3rd ed.). Mc Graw Hill.
- Ismail, M., Fartaj, A., Karimi, M. (2013). Numerical Investigation on Heat Transfer and Fluid Flow Behaviors of Viscous Fluids in a Minichannel Heat Exchanger, Numerical Heat Transfer, Part A. 64(1), 1–29.
- Marcelino, E., Riehl, R.R. & Silva, D. de O. (2016). A Review on Thermal Performance of CuO-Water Nanofluids Applied to Heat Pipes and Their Characteristics. In: Proc. of 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).
- Beck, M.P. (2008). Thermal conductivity of metal oxide nanofluids. PhD Thesis. Georgia Institute of Technology, Georgia.
- Engineering Toolbox: Ethylene Glycol Heat-Transfer Fluid Properties. Retrieved December 25, 2022 from https://www.engineeringtoolbox.com/ethylene-glycol-d_146.html
- Kulkarni, D.P., Namburi, P., Misra, D. & Das, D.K. (2007). Viscosity of Copper Oxide Nanoparticles Dispersed in Ethylene Gylcol and Water Mixture. Exp. Therm. Fluid Sci. 32(2), 397–402. DOI: 10.1016/j.expthermflusci.2007.05.001.
- Genceli, O. (2005). Measurement technnique (Dimension, Pressure, Flow and Temperature Measurements). Istanbul, Türkiye. Birsen Publisher.
- Kline, S.J. & McClintock, F.A. (1953). Describing Uncertainties in Single-Sample Experiments. Mechanical Engineers. 75, 3–8.
- Mikielewicz, D. & Wajs, J. (2017). Possibilities of Heat Transfer Augmentation in Heat Exchangers with Minichannels for Marine Applications. Pol. Marit. Res. 24, 133–140. DOI: 10.1515/pomr-2017-0031.
- Miry, S.Z., Rowshani, M., Hanafizadeh, P., Ashjaee, M. & Amini, F. (2016). Heat Transfer and Hydrodynamic Performance Analysis of a Miniature Tangential Heat Sink Using Al2O3-H2O and TiO2-H2O Nanofluids. Exp. Heat Transf., 29, 1–25. DOI: 10.1080/08916152.2015.1046016.
- Saadoon, Z.H., Ali F.H., Hamzah, H.K., Abed, A.M. & Hatami, M. (2022). Improving the Performance of Mini-Channel Heat Sink by Using Wavy Channel and Different Types of Nanofluids. Sci. Rep., 12, 9402. DOI: 10.1038/s41598-022-13519-0.