References
- Kandlikar, S.G., & Grande, W.J. (2003). Evolution of microchannel flow passages-thermohydraulic performance and fabrication technology. Heat Transfer Engin., 24(1), 3–17. DOI: 10.1080/01457630304040.
- Mehendale, S.S., Jacobi, A.M., & Shah, R.K. (2000). Fluid flow and heat transfer at micro-and meso-scales with application to heat exchanger design. Appl. Mech. Rev., vol. 53, no 7. DOI: 10.1115/1.3097347.
- Heatric Ltd. Heatric Printed Circuit Heat Exchangers. Retrieved April 26, 2023, from https://www.heatric.com/heat-exchangers/
- Kang, S.W., Chen, Y.T., & Chang, G.S. (2002). The manufacture and test of (110) orientated silicon based micro heat exchanger. J. Appl. Sci. Engin., 5(3), 129–136. DOI: 10.6180/jase.2002.5.3.02.
- Pabiś, A. (2011). Charakterystyka pracy krzyżowo-prądowego mikrowymiennika ciepła. Chemik 2011, 65, 10, 983–990.
- Prończuk, M., & Krzanowska, A. (2021). Experimental investigation of the heat transfer and pressure drop inside tubes and the shell of a minichannel shell and tube type heat exchanger. Energies, 14(24), 8563. DOI: 10.3390/en14248563.
- Hobler, T. (1979). Ruch ciepła i wymienniki (wydanie V). Warszawa, Polska: Wydawnictwa Naukowo Techniczne.
- The MathWorks, Inc. Matlab. Retrieved April 26, 2023, from https://www.mathworks.com/products/matlab.html
- Shah, R.K. (1975). Thermal entry length solutions for the circular tube and parallel plates. In Proceedings of 3rd national heat and mass transfer conference 1975, Vol. 1, pp. 11–75. Indian Institute of Technology Bombay.
- Sieder, E.N., & Tate, G.E. (1936). Heat transfer and pressure drop of liquids in tubes. Ind. & Engin. Chem., 28(12), 1429–1435. DOI: 10.1021/ie50324a027.
- Dittus, F.W. (1930). Heat transfer in automobile radiators of the tube type. Univ. Calif. Pubs. Eng., 2, 443.
- Hausen, H. (1959). New equations for heat transfer with free or forced flow [in German]. Allg. Waermetech, 9, 75–79.
- Gnielinski, V. (1976). New equations for heat and mass transfer in turbulent pipe and channel flow. Int. Chem. Eng., 16(2), 359–368.
- Ünverdi, M., Kücük, H., & Yılmaz, M.S. (2019). Experimental investigation of heat transfer and pressure drop in a mini-channel shell and tube heat exchanger. J. Heat Mass Transfer, 55, 1271–1286. DOI: 10.1007/s00231-018-2514-0.
- Choi, S.B., Barron, R.F. & Warrington, R.O. (1991). Fluid flow and heat transfer in microtubes, in: Micromechanical Sensors, Actuators and Systems, ASME DSC, vol. 32, Atlanta, GA, pp. 123–134
- Yu, D., Warrington, R.O., Barron, R. & Ameel, T. (1995). An experimental and theoretical investigation of fluid flow and heat transfer in microtubes, in: Proceedings of ASME/JSME Thermal Engineering Joint Conf., Maui, HI, pp. 523–530.
- Adams, T.M., Abdel-Khalik, S.I., Jeter, S.M. & Qureshi, Z.H. (1998). An Experimental investigation of single-phase forced convection in microchannels, Internat. J. Heat Mass Transfer, 41, 851–857. DOI: 10.1016/S0017-9310(97)00180-4.