References
- 1. Kennedy, I.M. (2007). The health effects of combustion--generated aerosols. Proc. Combust. Inst. 31(2), 2757–2770, DOI: 10.1016/j.proci.2006.08.116.
- 2. Aranowski, R. & Lewandowski, W.M. (2016). Environmental protection technologies in industry and energy. PWN, Warsaw, Poland, (in Polish).
- 3. Biswas, S., Verma, V., Schauer, J.J., Sioutas, C. (2009). Chemical speciation of PM emissions from heavy-duty diesel vehicles equipped with diesel particulate filter (DPF) and selective catalytic reduction (SCR) retrofits. Atmos. Environ. 43(11), 1917–1925, DOI: 10.1016/j.atmosenv.2008.12.040.
- 4. Ramaswamy, K., Jule, L.T., Nagaprasad, N., Subramanian, K., Shanmugam, R., Dwarampudi, L.P., Seenivasan, V. (2022). Reduction of environmental chemicals, toxicity and particulate matter in wet scrubber device to achieve zero emissions. Sci. Rep. 12, 9170. DOI: 10.1038/s41598-022-13369-w.
- 5. Directive 2008/50 / EC of the European Parliament and of the Council on ambient air quality and cleaner air for Europe, (in Polish).
- 6. Krupińska, A., Ochowiak, M., Włodarczak, S. (2018). Selected Aspects of Dust Removal from Gas Stream for Chamber Separators. In. Practical Aspects of Chemical Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Ochowiak, M.; Woziwodzki, S.; Doligalski, M.; Mitkowski; P. Eds. Springer, DOI: 10.1007/978-3-319-73978-6_15.
- 7. Atsumi, K. & Akiyama, T. (1975). A study of cake filtration formulation as a stefan problem. J. Chem. Eng. Jpn. 8(6), 487–492, DOI: 10.1252/jcej.8.487.
- 8. Niu, J., Zheng, Q., Lv, D., Wang, Y. (2022). Numerical simulation of the effect of air-intake on the indoor flow field of a dedusting equipment cabin used in tunnel construction. Alex. Eng. J. 61, 12405–12416, DOI: 10.1016/j.aej.2022.06.028.
- 9. Dembiński, Cz., Potok, Z., Kucerka, M., Kminiak, R., Očkajová, A., Rogoziński, T. (2022). The Flow Resistance of the Filter Bags in the Dust Collector Operating in the Line of Wood-Based Furniture Panels Edge Banding. Appl. Sci. 12, 5580. DOI: 10.3390/app12115580.
- 10. Huanga, Y., Lu, L., Ding, Ch., Pan, M. (2022). Eco--friendly wood-plastic composites from laminate sanding dust and waste poly(propylene) food pails. J. Waste Manag. 149, 96–104, DOI: 10.1016/j.wasman.2022.06.012.
- 11. Klinzing, G.E. (2018). Historical Review of Pneumatic Conveying. KONA Powder Part. J., 35, 150–159, DOI: 10.14356/kona.2018010.
- 12. Azarov, V.N., Barikaeva, N.S., Solovyeva, T. (2016). Monitoring of fine particulate air pollution as a factor in urban planning decisions, Procedia Engineering, 150, 2001–2007, DOI: 10.1016/j.proeng.2016.07.279.
- 13. Chen, L., Jin, X, Yang, L, Du, X., Yang, Y. (2016). Particle transport characteristics in indoor environment with an air cleaner: The effect of nonuniform particle distributions. Build Simul 10, 123–133, DOI: 10.1007/s12273-016-0310-7.
- 14. Azadi, M. & Azadi, M. (2012). An analytical study of the effect of inlet velocity on the cyclone performance using mathematical models. Powder Technol. 217, 121–127, DOI: 10.1016/j.powtec.2011.10.017.
- 15. Dritselis, Ch. & Karapetsas, G. (2022). Open-source finite volume solvers for multiphase (n-phase) flows involving either Newtonian or non-Newtonian complex fluids, Computers and Fluids, 245, 105590, DOI: 1048550/arXiv.2203.09870.
- 16. Twin Lobe High Pressure Blowers. Available online: https://www.indiamart.com/proddetail/twin-lobe-high-pressure--blowers-10456367788.html
- 17. Beaulac, P., Issa, M., Ilinca, A., Brousseau, J. (2022). Parameters Affecting Dust Collector Efficiency for Pneumatic Conveying: A Review. Energies 15, 916. DOI: 10.3390/en15030916.
- 18. Azarov, V.N., Trohimchuk, M.V., Trohimchuk, K.A. (2016). Empirical studies of the processes of dust distribution in the areas of construction dumps. News of higher education institutions, Geology and exploration 1, 55–59.
- 19. Clarke, K.L., Pugsley, T., Hill, G.A. (2005). Fluidization of moist sawdust in binary particle systems in a gas–solid fluidized bed. Chem. Eng. Sci., 60, 6909–6918, DOI: 10.1016/j. ces.2005.06.004.
- 20. Kunii, D. & Levenspiel, O. (1991). Fluidization Engineering, 2nd ed.; Butterworth-Heinemann: Stoneham, MA, USA.
- 21. Warych, J. (1998). Gas purification. Processes and apparatus. WNT, Warszawa, Poland, (in Polish).
- 22. Leith, D. & Mehta, D. (1973). Cyclone performance and design. Atmos. Environ., 7, 527–549, DOI: 10.1016/0004-6981(73)90006-1.
- 23. Ochowiak, M., Broniarz-Press, L., Nastenko, O.V. (2016). Purification of the air stream in a cylindrical chamber dust collector. Inż. Ap. Chem. 55, 2, 66–67.
- 24. Ochowiak, M., Matuszak, M., Włodarczak, S., Ancukieiwcz, M., Krupińska, A. (2017). Analysis of the influence of selected parameters on air purification in a chamber dust collector using the phenomenon of swirl motion. Inż. Ap. Chem. 56, 3, 96–97.