Investigation and Prediction of ECMM characteristics of Hardened Die Steel with Nanoparticle Added Electrolytes Using Hybrid Deep Neural Network

Kanniyappan, Vijayakumar; Tamilperuvalathan, Sekar

doi:10.2478/pjct-2022-0024

Abstract

In our work, the process efficiency of the ECMM should be improved by using different combinations of nano-particles and added electrolytes. The superior aim of this work is to improve and predict the ECMM machining characteristics of die hardened steel, namely material removal rate (MRR), Tool wear rate (TWR) and Surface Roughness (Ra). The machining conditions are optimized using Response Surface Methodology (RSM) based on Box Behnken Design. The better Nano electrolyte is optimized using Deer Hunting Optimization (DHO) based on the machined outcomes, and the performances are predicted using a hybrid Deep Neural Network (DNN) based DHO. The hybrid DNN-DHO based predicted outcome of MRR is 0.361 mg/min, TWR is 0.272 mg/min and Ra is 2.511 μm. The validation results show that our proposed DNN-DHO model performed well and obtained above 0.99 regression for both training and validation of DNN-DHO, where the root mean square error ranges between 0.018 and 0.024.

References

1. Prakash, C., Kansal, H.K., Pabla, B.S. & Puri, S. (2017). Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy. Materials and Manufacturing Processes, 32(3), 274–285. DOI: 10.1080/10426914.2016.1198018.10.1080/10426914.2016.1198018
Search in Google Scholar Back to article
2. Sathish, T. (2019). Experimental investigation of machined hole and optimization of machining parameters using electro-chemical machining. J. Mater. Res. Technol., 8(5), 4354–4363. DOI: 10.1016/j.jmrt.2019.07.046.10.1016/j.jmrt.2019.07.046
Search in Google Scholar Back to article
3. He, H.D., Qu, N.S., Zeng, Y.B. & Yao, Y.Y. (2017). Enhancement of mass transport in wire electrochemical micro-machining by using a micro-wire with surface microstructures. The International J. Adv. Manufact. Technol., 89(9), 3177–3186. DOI: 10.1007/s00170-016-9262-4.10.1007/s00170-016-9262-4
Search in Google Scholar Back to article
4. Sekar, T. & Marappan, R. (2008). Experimental investigations into the influencing parameters of electrochemical machining of AISI 202. J. Adv. Manufact. Systems, 7(02), 337–343. DOI: 10.1142/S0219686708001486.10.1142/S0219686708001486
Search in Google Scholar Back to article
5. Meng, L., Zeng, Y. & Zhu, D. (2017). Investigation on wire electrochemical micro machining of Ni-based metallic glass. Electrochimica Acta, 233, 274–283. DOI: 10.1016/j. electacta.2017.03.045.10.1016/j.electacta.2017.03.045
Search in Google Scholar Back to article
6. Dong, S., Wang, Z. & Wang, Y. (2017). High-speed electrochemical discharge drilling (HSECDD) for micro-holes on C17200 beryllium copper alloy in deionized water. The International J. Adv. Manufact. Technol. 88(1), 827–835. DOI: 10.1007/s00170-016-8645-x.10.1007/s00170-016-8645-x
Search in Google Scholar Back to article
7. Soundarrajan, M. & Thanigaivelan, R. (2019). Investigation of electrochemical micromachining process using ultrasonic heated electrolyte. Adv. Micro and Nano Manufact. Surf. Engin., Springer, Singapore, 423–434. DOI: 10.1007/978-981-32-9425-7_38.10.1007/978-981-32-9425-7_38
Search in Google Scholar Back to article
8. Rathod, V., Doloi, B. & Bhattacharyya, B. (2017). Fabrication of microgrooves with varied cross-sections by electro-chemical micromachining. Internat. J. Adv. Manufact. Technol., 92(1), 505–518. DOI: 10.1007/s00170-017-0167-7.10.1007/s00170-017-0167-7
Search in Google Scholar Back to article
9. Anasane, S.S. & Bhattacharyya, B. (2016). Experimental investigation on suitability of electrolytes for electrochemical micromachining of titanium. Internat. J. Adv. Manufact. Technol., 86(5), 2147–2160. DOI: 10.1007/s00170-015-8309-2.10.1007/s00170-015-8309-2
Search in Google Scholar Back to article
10. Thanigaivelan, R., Arunachalam, R.M., Kumar, M. & Dheeraj, B.P. (2018). Performance of electrochemical micromachining of copper through infrared heated electrolyte. Mater. Manufact. Proces., 33(4), 383–389. DOI: 10.1080/10426914.2017.1279304.10.1080/10426914.2017.1279304
Search in Google Scholar Back to article
11. Liu, W., Zhang, H., Luo, Z., Zhao, C., Ao, S., Gao, F. & Sun, Y. (2018). Electrochemical micromachining on titanium using the NaCl-containing ethylene glycol electrolyte. J. Mater. Proces. Technol., 255, 784–794. DOI: 10.1016/j. jmatprotec.2018.01.009.10.1016/j.jmatprotec.2018.01.009
Search in Google Scholar Back to article
12. Geethapriyan, T., Samson, R.M., Thavamani, J., Arun Raj, A.C. & Pulagam, B.R. (2019). Experimental investigation of electrochemical micro-machining process parameters on stainless steel 316 using sodium chloride electrolyte. Adv. Manufact. Proces. Springer, Singapore, 471-480. DOI: 10.1007/978-981-13-1724-8_45.10.1007/978-981-13-1724-8_45
Search in Google Scholar Back to article
13. Bhuyan, B.K. & Yadava, V. (2013). Experimental modeling and multi-objective optimization of traveling wire electro-chemical spark machining (TW-ECSM) process. J. Mech. Sci. Technol., 27(8), 2467–2476. DOI: 10.1007/s12206-013-0632-7.10.1007/s12206-013-0632-7
Search in Google Scholar Back to article
14. Sethi, A., Acharya, B.R. & Saha, P. (2022). Electrochemical dissolution of WC-Co micro-tool in micro-WECM using an Eco-friendly citric acid mixed NaNO3 electrolyte. J. The Electrochem. Soc., 169(3), 033503. DOI: 10.1149/1945-7111/ac54d9.10.1149/1945-7111/ac54d9
Search in Google Scholar Back to article
15. Yu, N., Fang, X., Meng, L., Zeng, Y. & Zhu, D. (2018). Electrochemical micromachining of titanium microstructures in an NaCl–ethylene glycol electrolyte. J. Appl. Electrochem., 48(3), 263–273. DOI: 10.1007/s10800-018-1145-y.10.1007/s10800-018-1145-y
Search in Google Scholar Back to article
16. Tak, M., Reddy S.V., Mishra, A. & Mote, R.G. (2018). Investigation of pulsed electrochemical micro-drilling on titanium alloy in the presence of complexing agent in electrolyte. J. Micromanufac., 1(2), 142–153. DOI: 10.1177/2516598418784682.10.1177/2516598418784682
Search in Google Scholar Back to article
17. Ma, N., Phattharasupakun, N., Wutthiprom, J., Tanggarnjanavalukul, C., Wuanprakhon, P., Kidkhunthod, P. & Sawangphruk, M. (2018). High-performance hybrid supercapacitor of mixed-valence manganese oxide/n-doped graphene aerogel nanoflower using an ionic liquid with a redox additive as the electrolyte: In situ electrochemical x-ray absorption spectroscopy. Electrochimica Acta, 271, 110–119. DOI: org/10.1016/j. electacta.2018.03.116.10.1016/j.electacta.2018.03.116
Search in Google Scholar Back to article
18. Singh, P.K., Das, A.K., Hatui, G. & Nayak, G.C. (2017). Shape controlled green synthesis of CuO nanoparticles through ultrasonic assisted electrochemical discharge process and its application for supercapacitor. Mater. Chem. Phys., 198, 16–34. DOI: 10.1016/j.matchemphys.2017.04.070.10.1016/j.matchemphys.2017.04.070
Search in Google Scholar Back to article
19. Sekar, T., Arularasu, M. & Sathiyamoorthy, V. (2016). Investigations on the effects of Nano-fluid in ECM of die steel. Measurement, 83, 38–43. DOI: 10.1016/j.measurement.2016.01.035.10.1016/j.measurement.2016.01.035
Search in Google Scholar Back to article
20. Jiang, K., Wu, X., Lei, J., Wu, Z., Wu, W., Li, W. & Diao, D. (2018). Vibration-assisted wire electrochemical micromachining with a suspension of B4C particles in the electrolyte. Internat. J. Adv. Manufac. Technol., 97(9), 3565–3574. DOI: 10.1007/s00170-018-2190-8.10.1007/s00170-018-2190-8
Search in Google Scholar Back to article
21. Geethapriyan, T., Muthuramalingam, T., Vasanth, S., Thavamani, J. & Srinivasan, V.H. (2019). Influence of nanoparticles-suspended electrolyte on machinability of stainless steel 430 using electrochemical micro-machining process. Adv. Manufac. Proces. Sprin., Singap. 433–440. DOI: 10.1007/978-981-13-1724-8_42.10.1007/978-981-13-1724-8_42
Search in Google Scholar Back to article
22. Kumaar, J.R.V., Thanigaivelan, R. & Soundarrajan, M. (2022). A performance study of electrochemical micro-machining on SS 316L using suspended copper metal powder along with stirring effect. Mater. Manufac. Proces., 1–14. DOI: 10.1080/10426914.2022.2030874.10.1080/10426914.2022.2030874
Search in Google Scholar Back to article
23. Yang, Y., Natsu, W. & Zhao, W. (2011). Realization of eco-friendly electrochemical micromachining using mineral water as an electrolyte. Precision Engin., 35(2), 204–213. DOI: 10.1016/j.precisioneng.2010.09.009.10.1016/j.precisioneng.2010.09.009
Search in Google Scholar Back to article
24. Geethapriyan, T., Kalaichelvan, K. & Muthuramalingam, T. (2016). Multi performance optimization of electrochemical micro-machining process surface related parameters on machining Inconel 718 using Taguchi-grey relational analysis. La Metallurgia Italiana, 2016(4), 13–19.
Search in Google Scholar Back to article
25. Fard, A.F. & Hajiaghaei-Keshteli, M. (2016). Red Deer Algorithm (RDA); a new optimization algorithm inspired by Red Deers’ mating. Internat. Confer. Ind. Engin., IEEE 12, 331–342.
Search in Google Scholar Back to article
26. Pradeep, N., Sundaram, K.S. & Kumar, M.P. (2020). Performance investigation of variant polymer graphite electrodes used in electrochemical micromachining of ASTM A240 grade 304. Mater. Manufact. Proces., 35(1), 72–85. DOI: 10.1080/10426914.2019.1697445.10.1080/10426914.2019.1697445
Search in Google Scholar Back to article
27. Krishnan, N., Deepak, J. & Hariharan, P. (2020). Multi-response optimization of electrochemical micromachining on masked SS304. Engin. Res. Express, 2(1), 015041. DOI: 10.1088/2631-8695/ab5eb9.10.1088/2631-8695/ab5eb9
Search in Google Scholar Back to article
28. Panigrahi, D., Rout, S., Patel, S.K. and Dhupal, D. (2021). Stray current and its consequences on microstructure of Hastelloy C-276 during parametric investigation on geometrical features: fabricated by electrochemical micromachining. Inter-nat. J. Adv. Manufact. Technol., 112(1), 133–156. DOI:10.1007/s00170-020-06365-9.10.1007/s00170-020-06365-9
Search in Google Scholar Back to article
29. Prakash, J. & Gopalakannan, S. (2021). Teaching— learning-based optimization coupled with response surface methodology for micro electrochemical machining of aluminium nanocomposite. Silicon, 13(2), 409–432. DOI: 10.1007/s12633-020-00434-0.10.1007/s12633-020-00434-0
Search in Google Scholar Back to article
30. Ranganayakulu, J., Srihari, P.V. & Rao, K.V. (2021). An optimization strategy to improve performance in electrochemical discharge machining of borosilicate glass using graph theory algorithm and desirability index. Silicon, 1–14. DOI: 10.1007/s12633-021-01317-8.10.1007/s12633-021-01317-8
Search in Google Scholar Back to article
31. Gautam, N., Goyal, A., Sharma, S.S., Oza, A.D. & Kumar, R., 2022. Study of various optimization techniques for electric discharge machining and electrochemical machining processes. Materials Today: Proceedings, 57, 615–621. DOI: 10.1016/j.matpr.2022.02.005.10.1016/j.matpr.2022.02.005
Search in Google Scholar Back to article
32. Aslan, N.E.V.Z.A.T. & Cebeci, Y.A.K.U.P. (2007). Application of Box–Behnken design and response surface methodology for modeling of some Turkish coals. Fuel, 86(1–2), 90–97. DOI: 10.1016/j.fuel.2006.06.010.10.1016/j.fuel.2006.06.010
Search in Google Scholar Back to article
33. Barabadi, H., Honary, S., Ebrahimi, P., Alizadeh, A., Naghibi, F. & Saravanan, M. (2019). Optimization of myco-synthesized silver nanoparticles by response surface methodology employing Box-Behnken design. Inorganic and Nano-Metal Chemistry, 49(2), 33–43. DOI: 10.1080/24701556.2019.1583251.10.1080/24701556.2019.1583251
Search in Google Scholar Back to article
34. Kim, S.G., Harwani, M., Grama, A. & Chaterji, S. (2016). EP-DNN: a deep neural network-based global enhancer prediction algorithm. Scientific reports, 6(1), 1–13. DOI: 10.1038/srep38433.10.1038/srep38433514406227929098
Search in Google Scholar Back to article
35. Brammya, G., Praveena, S., Ninu Preetha, N.S., Ramya, R., Rajakumar, B.R. & Binu, D. (2019). Deer hunting optimization algorithm: a new nature-inspired meta-heuristic paradigm. Comp. J. DOI: 10.1093/comjnl/bxy133.10.1093/comjnl/bxy133
Search in Google Scholar Back to article
36. Elhami, S. & Razfar, M.R. (2020). Application of nano electrolyte in the electrochemical discharge machining process. Precision Engin., 64, 34–44. DOI: 10.1016/j.precisioneng.2020.03.010.10.1016/j.precisioneng.2020.03.010
Search in Google Scholar Back to article
37. Teimouri, R. & Sohrabpoor, H. (2013). Application of adaptive neuro-fuzzy inference system and cuckoo optimization algorithm for analyzing electro chemical machining process. Front. Mech. Engin., 8(4), 429–442. DOI: 10.1007/s11465-013-0277-3.10.1007/s11465-013-0277-3
Search in Google Scholar Back to article
38. Charak, A. & Jawalkar, C.S. (2020). Experimental studies in micro channelling on borosilicate glass using RSM optimization technique. Silicon, 12(7), 1707–1721. DOI: 10.1007/s12633-019-00269-4.10.1007/s12633-019-00269-4
Search in Google Scholar Back to article
39. Rajput, V., Goud, M. & Suri, N.M. (2021). Performance analysis of closed-loop electrochemical discharge machining (CLECDM) during micro-drilling and response surface methodology based multi-response parametric optimization. Adv. Mater. Process. Technol.1–31. DOI: 10.1080/2374068X.2020.1860494.10.1080/2374068X.2020.1860494
Search in Google Scholar Back to article
40. Gopinath, C., Lakshmanan, P. & Amith, S.C. (2021). Production of Micro-holes on Duplex Stainless Steel 2205 by Electrochemical Micromachining: A Grey-RSM Approach. Arabian J. Sci. Engin., 46(3), 2769–2782. DOI: 10.1007/s13369-020-05277-w.10.1007/s13369-020-05277-w
Search in Google Scholar Back to article

Investigation and Prediction of ECMM characteristics of Hardened Die Steel with Nanoparticle Added Electrolytes Using Hybrid Deep Neural Network

Abstract

Paradigm

My account