References
- 1. Bergenståhl, B. & Claesson, P.M. (1997). Surface forces in emulsions. In K. & F. Larsson S. (Ed.), Food Emulsions (3rd ed., pp. 57–109). YKI – Ytkemiska institutet: Marcel Dekker.
- 2. Drelich, A., Gomez, F., Clausse, D. & Pezron, I. (2010). Evolution of water-in-oil emulsions stabilized with solid particles: Influence of added emulsifier. Colloids Surfaces A Physicochem. Eng. Asp. 365, 171–177. DOI: 10.1016/j.colsurfa.2010.01.042.
- 3. Li, C., Mei, Z., Liu, Q., Wang, J., Xu, J. & Sun, D. (2010). Formation and properties of paraffin wax submicron emulsions prepared by the emulsion inversion point method. Colloids Surfaces A Physicochem. Eng. Asp. 356(1–3), 71–77. DOI: 10.1016/j.colsurfa.2009.12.036.
- 4. Ushikubo, F.Y. & Cunha, R.L. (2014). Stability mechanisms of liquid water-in-oil emulsions. Food Hydrocoll. 34, 145–153. DOI: 10.1016/j.foodhyd.2012.11.016.
- 5. Mujumdar, A.S. (2004). Research and development in drying: Recent trends and future prospects. Dry. Technol. 22(1–2), 1–26. DOI: 10.1081/DRT-120028201.
- 6. Connick, W., Daigle, D. & Quimby, P. (1991). An Improved Invert Emulsion with High Water Retention for Mycoherbicide Delivery. Weed Technology 5(2), 442–444. DOI: 10.1017/S0890037X00028402.
- 7. Williams, S.D. & Schmitt, W.H. (Ed.). (1992). Chemistry and Technology of the Cosmetics and Toiletries Industry (1st ed.). Springer Netherlands.
- 8. Klein, K. (2003). Formulating Water-in-Oil Emulsions: A Scary Endeavor, 118, 24–25.
- 9. Williams, D.F. (2002). The chemistry and manufacture of cosmetic (Volume III).
- 10. Binks, B.P. & Rocher, A. (2009). Effects of temperature on water-in-oil emulsions stabilised solely by wax microparticles. J. Colloid Interf. Sci. 335(1), 94–104. DOI: 10.1016/j. jcis.2009.03.089
- 11. Greenspan, L. (1977). Humidity fixed points of binary saturated aqueous solutions. J. Res. Natl. Bur. Stand., A Phys. Chem. 81A(1), 89. DOI: 10.6028/jres.081A.011
- 12. Young, J.F. (1967). Humidity control in the laboratory using salt solutions. J. Appl. Chem. 17(September), 241–245.
- 13. Henríquez, C.J.M. (2009). W/O Emulsions: Formulation, Characterization and Destabilization. Doctoral thesis. Brandenburgische Technische Universität Cottbus, Fakultät fur Umweltwissenschaften und Verfahrenstechnik. http://opus4.kobv.de/opus4-btu/frontdoor/deliver/index/docId/471/file/gene-hmigte_Diss_Morales.pdf.
- 14. Webster, J.G. (Ed.). (1999). The measurement, instrumentation and sensors (1st ed.). CRC Press LLC.
- 15. Keey, R.B. (1978). Introduction to Industrial Drying Operations. Pergamon Press.
- 16. Babbitt, J.D. (1950). On the differential equations of diffusion. Can J. Res. 28(2172), 449–474. DOI: 10.1139/cjr50a-037
- 17. Crank, J. (1975). The Mathematics of Diffusion (2nd ed.). Clarendon Press.
- 18. Wexler, A. & Hasegawa, S. (1954). Relative humidity-temperature relationships of some saturated salt solutions in the temperature range 0 degree to 50 degrees C. J. Res. Natl. Bur. Stand. 53(1), 19–26. DOI: 10.6028/jres.053.003.
- 19. Keey, R.B. (1972). Drying principles and practice. Pergamon Press.
- 20. Bell, L.N. & Labuza, T.P. (2000). Practical Aspects of Moisture Sorption Isotherm Measurement and Use (2nd ed.). AACC Eagan Press.