References
- 1. Das, A., Wang, D.Y., Leuteritz, A., Subramaniam, K., Greenwell, H.C., Wagenknecht, U. & Heinrich, G. (2011). Preparation of zinc oxide free, transparent rubber nanocomposites using a layered double hydroxide filler. J. Mater. Chem. 21, 7194-7200. DOI: 10.1039/C0JM03784B.
- 2. Chokanandsombat, Y. & Sirisinha, Ch. (2012). MgO and ZnO as reinforcing fillers in cured polychloroprene rubber. J. Appl. Polym. Sci. DOI: 10.1002/app.38579.
- 3. Sabu, T. & Ranimol, S. (2010). Rubber nanocomposites - preparation, properties and applications. Wiley, Singapore.
- 4. Stöckelhuber, K.W., Das, A., Jurk, R. & Heinrich, G. (2010). Contribution of physic-chemical properties of interfaces on dispersibility, adhesion and fl occulation of filler particles in rubber. Polymer 51, 1954-1963. DOI: 10.1016/j.polymer.2010.03.013.
- 5. Mandal, U.K., Tripathy, D.K. & De, S.K. (2003). Effect of silica filler on dynamic mechanical properties of ionic elastomer based on carboxylated nitrile rubber. J. Appl. Polym. Sci. 55, 1185-1191. DOI: 10.1002/app.1995.070550805.
- 6. Chapman, A.V. (1997). Safe rubber chemicals: reduction of zinc levels in rubber compounds. TAARC/MRRA.
- 7. Yuan, Z., Zhou, W., Hu, T., Chen, Y., Li, F., Xu, Z. & Wang, X. (2011). Fabrication and properties of silicone rubber/ZnO nanocomposites via in situ surface hydrosilylation. Surf. Rev. Lett. 18, 33-38. DOI: 10.1142/S0218625X11014448.
- 8. Mandal, U.K., Tripathy, D.K. & De, S.K. (1996). Dynamic mechanical spectroscopic studies on plasticization of an ionic elastomer based on carboxylated nitrile rubber by ammonia. Polymer 37, 5739-5742. DOI: 10.1016/S0032-3861(96)00545-9.
- 9. Ibarra, L., Marcos-Fernandez, A. & Alzorriz, M. (2002). Mechanistic approach to the curing of carboxylated nitrile rubber (XNBR) by zinc peroxide/zinc oxide. Polymer 43, 1649-1655. DOI: 10.1016/S0032-3861(01)00734-0.
- 10. Chatterjee, K. & Naskar, K. (2007). Development of thermoplastic elastomers based on maleated ethylene propylene rubber (n-EPM) and propylene (PP) by dynamic vulcanization. Express Polym. Lett. 1, 527-534. DOI: 10.3144/expresspolymlett.2007.75.
- 11. Pradham, S., Costa, F.R., Wagenknecht, U., Jehnichen, D., Bhowmick, A.K. & Heinrich, G. (2008). Elastomer/LDH nanocomposites: synthesis and studies on nanoparticle dispersion, mechanical and interfacial adhesion. Eur. Polym. J. 44, 3122-3132. DOI: 10.1016/j.eurpolymj.2008.07.025.
- 12. Hamed, G.R. & Hua, K.C. (2004). Effect of zinc oxide particle size on the curing of carboxylated NBR and carboxylated SBR. Rubber Chem. Tech. 77, 214-226. DOI: 10.5254/1.3547818.
- 13. Przybyszewska, M. & Zaborski, M. (2009). The effect of zinc oxide nanoparticle morphology on activity in crosslinking of carboxylated nitrile elastomer. Express Polym. Lett. 3, 542-552. DOI: 10.3144/expresspolymlett.2009.68.
- 14. Fosmire, G.J. (1990). Zinc toxicity. Am. J. Clin. Nutr. 51, 225-227.
- 15. Heideman, G., Datta, R.N., Noordermeer, J.W.M. & Van Baarle, B. (2005). Infl uence of zinc oxide during different stages of sulfur vulcanization. Elucidated by model compound studies. J. Appl. Polym. Sci. 95, 1388-1404. DOI: 10.1002/app.21364.
- 16. Thomas, S.P., Mathew, E.J. & Marykutty, C.V. (2012). Synthesis and effect of surface modified nano ZnO in natural rubber vulcanization. J. Appl. Polym. Sci. 124, 3099-3107. DOI: 10.1002/app.35349.
- 17. Sabura Begum, P.M., Mohammed Yusuff, K.K. & Joseph, R. (2008). Preparation and use of nano zinc oxide in neoprene rubber. Int. J. Polym. Mater. 57, 1083-1094. DOI: 10.1080/00914030802341646.
- 18. Flory, P.J. & Rehner, J. (1943). Statistical mechanics of cross-linked polymer networks II. Swelling. J. Chem. Phys. 11, 521-526. DOI: 10.1063/1.1723792.
- 20. Maciejewska, M. & Zaborski, M. (2010). Coagents of peroxide crosslinking of elastomer. Przem. Chem. 89, 472-477.