Simulating Rolling Element Bearing Defects in Induction Machines
By: Florian Floh, Helmut Weiss and Markus Makoschitz
References
- Floh, F. and Weiss, H. (2023). On the simulation of bearing faults in induction machines. In: Proceedings of the 36th International Conference on Electrical Drives and Power Electronics EDPE. The High Tatras, 25–27 September 2023. doi: 10.1109/EDPE58625.2023.10274044.
- Giersch, H. U., Harthus, H. and Vogelsang, N. (1991). Elektrische Maschinen. B.G. Teubner Stuttgart., Stuttgart. [ISBN: 3-519-26821-26823]
- Gonzalo, A. (2017). Power Electronics and Electric Drives for Traction Application. Wiley, West Sussex. [ISBN: 978-1-118-95442-95443]
- Gupta, P. K. (1975). Transient Ball Motion and Skid in Ball Bearings. Journal of Lubrication Technology, 97(2), pp. 261–269. doi: 10.1115/1.3452568
- Gupta, P. K. (1979). Dynamics of Rolling Element Bearings Part I: Cylindrical Roller Bearing Analysis. Journal of Lubrication Technology, 101(3), pp. 293–302. doi: 10.1115/1.3453357
- Howard, I. (1994). A Review of Rolling Element Bearing Vibration ‘Detection, Diagnosis and Prognosis’. Australia: DSTO Aeronautical and Maritime Research Laboratory.
- Krishnan, R. (2001). Electric Motor Drives: Modeling, Analysis, and Control. New Jersey: Prentice Hall. [ISBN: 978-0130910141]
- Kumbhar, S. G., Sudhagar, E. and Desavale, R. G. (2021). An Overview of Dynamic Modeling of Rolling-Element Bearings. Noise & Vibration Worldwide, 52(1–2), pp. 3–18. doi: 10.1177/0957456520948279
- Leedy, A. W. (2013). Simulink/MATLAB Dynamic Induction Motor Model for Use as a Teaching and Research Tool. International Journal of Soft Computing and Engineering (IJSCE), 3(4), pp. 102–108.
- Lundberg, G. and Palmgren, A. (1947). Dynamic Capacity of Rolling Bearing. Acta Polytechnic Mechanical Engineering Series, 1(3), pp. 165-172
- Meinel, A. (2020). Experimentelle Untersuchung der Auswirkungen von Axialschwingungen auf Reibung und Verschleiß in Zylinderrollenlagern. PhD-Thesis. Erlangen FAU University Press.
- Mishra, C., Samantaray, A. K. and Chakraborty, G. (2017). Ball Bearing Defect Models: A Study of Simulated and Experimental Fault Signatures. Journal of Sound and Vibration, 400, pp. 86–112. doi: 10.1016/j.jsv.2017.04.010
- Nandi, S., Toliyat, H. A. and Li, X. (2005). Condition Monitoring and Fault Diagnosis of Electrical Motors – A Review. IEEE Transactions on Energy Conversion, 20(4), pp. 719–729. doi: 10.1109/TEC.2005.847955
- Quang, N. P. and Dittrich, J. A. (2008). Vector Control of Three-Phase AC Machines. Springer, Heidelberg. [ISBN: 978-3-540-79028-79020]
- Sawalhi, N. and Randall, R. B. (2008). Simulating Gear and Bearing Interactions in the Presence of Faults. Part I. The Combined Gear Bearing Dynamic Model and the Simulation of Localized Bearing Faults. Mechanical Systems and Signal Processing, 22(8), pp. 1924–1951. doi: 10.1016/j.ymssp.2007.12.001
- SKF. (2022). Bearing Damage Analysis: ISO 15243 Is Here to Help You. SKF Evolution. Available at: https://evolution.skf.com/bearing-damage-analysis-iso-15243-is-here-to-help-you/. [Accessed 8 Sep. 2024].
- Smagala, A. and Kecik, K. (2019). Nonlinear Model and Simulation of a Rolling Bearing. IOP Conference Series Materials Science and Engineering,710, pp. 1–8. doi: 10.1088/1757-899X/710/1/012006
- Sopanen, J. and Mikkola, A. (2003a). Dynamic Model of a Deep Groove Ball Bearing Including Localized and Distributed Defects, Part 1: Theory. Journal of Multi-body Dynamics, 217(3), pp. 201–211. doi: 10.1243/14644190360713551
- Sopanen, J. and Mikkola, A. (2003b). Dynamic Model of a Deep Groove Ball Bearing Including Localized and Distributed Defects, Part 2: Implementation and Results. Journal of Multi-body Dynamics, 217(3), pp. 213–223. doi: 10.1243/14644190360713560
- Strangas, E. G., Clerc, G., Razik, H. and Soualhi, A. (2022). Fault Diagnosis, Prognosis, and Reliability for Electrical Machines and Drives. Wiley, Hoboken, New Jersey. [ISBN: 978-1-119-72275-72275]
- Thorsen, V. and Dalva, M. (1995). A Survey of Faults on Induction Motors in Offshore Oil Industry, Petrochemical Industry, Gas Terminals, and Oil Refineries. IEEE Transactions on Industry Applications, 35(5), pp. 1186–1196. doi: 10.1109/28.464536
Language: English
Page range: 540 - 561
Submitted on: May 28, 2024
Accepted on: Sep 30, 2024
Published on: Nov 2, 2024
Published by: Wroclaw University of Science and Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 1 issue per year
Related subjects:
© 2024 Florian Floh, Helmut Weiss, Markus Makoschitz, published by Wroclaw University of Science and Technology
This work is licensed under the Creative Commons Attribution 4.0 License.