References
- Boglietti, A., El-Refaie, A. M., Drubel, O., Omekanda, A. M. and Bianchi, N., Agamloh, E. B., Popescu, M., Di Gerlando, A. and Borg Bartolo, J. (2014). Electrical Machine Topologies: Hottest Topics in the Electrical Machine Research Community. IEEE Industrial Electronics Magazine, 8(2), pp. 18–30. doi: 10.1109/MIE.2013.2294077.
- El-Refaie, A. (2013). Fractional-slot concentrated-windings: A paradigm shift in electrical machines. In: 2013 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), Paris, France, 11-12 March 2013, pp. 24–32. doi: 10.1109/WEMDCD.2013.6525162.
- Ferraris, L., Franchini, F. and Poskovic, E. (2015). Design optimization of bonded PM BLDC motors with reference to the cogging torque amplitude. In: Proceedings of the 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, Japan, 9–12 November 2015, pp. 001264–001269.
- Guo, L., Wang, Y., Wang, H. and Zhang, Z. (2023a). Design of High Power Density Double-Stator Permanent Magnet Synchronous Motor. IET Electric Power Applications, 17(4), pp. 421–431. doi: 10.1049/elp2.12275.
- Guo, Y., Ba, X., Liu, L., Lu, H., Lei, G., Yin, W. and Zhu, J. (2023b). A Review of Electric Motors with Soft Magnetic Composite Cores for Electric Drives. Energies, 16, p. 2053. doi: 10.3390/en16042053.
- Hwang, M.-H., Lee, H.-S. and Cha, H.-R. (2018). Analysis of Torque Ripple and Cogging Torque Reduction in Electric Vehicle Traction Platform Applying Rotor Notched Design. Energies, 11(11), p. 3053.
- Königs, M., Baccouche, H., Breser, S., Jöns, T. and Löhlein, B. (2023). Simulation Time Reduction with 2.5D FEM-Analysis for Axial Flux Machines. Power Electronics and Drives, 8(43), pp. 100–108.
- Lefley, P., Petkovska, L. and Cvetkovski, G. (2011). Optimisation of the design parameters of an asymmetric brushless DC motor for cogging torque minimisation. In: Proceedings of 14th International European Conference on Power Electronics and Applications (EPE), Birmingham, United Kingdom, 30 August – 1 September 2011, pp. 1–8 on CD.
- Ling, P., Ishak, D. and Tiang, T. L. (2016). Influence of magnet pole arc variation on the performance of external rotor permanent magnet synchronous machine based on finite element analysis. In: Proceedings of IEEE International Conference on Power and Energy (PECon), Melaka, Malaysia, 28-29 November 2016, pp. 552–557.
- Ocak, C., Dalcalı, A., Celik, E. and Uygun, D. (2017). FEA-Based Design Improvement of Small Scale BLDCMs Considering Magnet Thickness and Pole Embrace. International Journal of Computing, Communication and Instrumentation Engineering, 4(2), pp. 31–35.
- Petkovska, L. and Cvetkovski, G. (2022). Optimising stator design of a single phase PM BLDC motor for improved cogging torque profile. In: Proceedings of 8th International Symposium on Applied Electromagnetics (SAEM), Struga, North Macedonia, 26–29 June 2022, pp. 59–65.
- Petkovska, L., Lefley, P. and Cvetkovski, G. (2022). Shaping the Topology of a Single Phase BLDC Motor for Reduced Cogging Torque and Improved Performance. The European Physical Journal, Applied Physics, 97(id.36), 8p.
- Quintal-Palomo, R. E., Gwoździewicz, M. and Dybkowski, M. (2016). Parametric Analysis for the Design of a 4 Pole Radial Permanent Magnet Generator for Small Wind Turbines. Power Electronics and Drives, 1(36)(2), pp. 175–186. doi: 10.5277/PED160211.
- Ramakrishnan, K., Curti, M., Zarko, D., Mastinu, G., Paulides, J. J. H. and Lomonova, E. A. (2017). Comparative Analysis of Various Methods for Modelling Surface Permanent Magnet Machines. IET Electric Power Applications, 11(4), pp. 540–547. doi: 10.1049/iet-epa.2016.0720.
- Rezal, M. and Ishak, D. (2019). Performance Enhancement of Underwater Propulsion Motor using Differential Evolution Optimization. Indian Journal of Geo Marine Sciences, 48(7), pp. 1113–1119.
- Rupam, Marwaha, S. and Marwaha, A. (2022). FEA Based Design of Outer Rotor BLDC Motor for Battery Electric Vehicle. International Journal of Electrical and Electronics Research, 10(4), pp. 1130–1134.
- Simcenter: MagNet Suite. https://www.plm.automation.siemens.com/global/en/products/simcenter/magnet.html.
- Simón-Sempere, V., Simón-Gómez, A., Burgos-Payán, M. and Cerquides-Bueno, J.-R. (2021). Optimisation of Magnet Shape for Cogging Torque Reduction in Axial-Flux Permanent-Magnet Motors. IEEE Transactions on Energy Conversion, 36(4), pp. 2825–2838. doi: 10.1109/TEC.2021.3068174.
- Wrobel, R. and Mellor, P. H. (2008). Design Considerations of a Direct Drive Brushless Machine with Concentrated Windings. IEEE Transactions on Energy Conversion, 23(1), pp. 1–8.
- Yokoi, Y., Higuchi, T. and Miyamoto, Y. (2016). General Formulation of Winding Factor for Fractional Slot Concentrated Winding Design. IET Electric Power Applications Journal, 10(4), pp. 231–239.
- Zhu, Z. Q. and Li, Y. X. (2018). Modularity Techniques in High Performance Permanent Magnet Machines and Applications. CES Transactions on Electrical Machines and Systems, 2(1), pp. 93–103.