References
- Ackermann, J. (1980). Parameter Space Design of Robust Control Systems. IEEE Transactions on Automatic Control, AC-25(6), pp. 1058–1072.
- Ackermann, J. (1985). Sampled-Data Control Systems: Analysis and Synthesis, Robust System Design. Berlin: Springer Eds.
- Ameur, A., Mokhtari, B., Essounbouli, N. and Mokrani, L. (2012). Speed Sensorless Direct Torque Control of a PMSM Drive using Space Vector Modulation Based MRAS and Stator Resistance Estimator. World Academy of Science, Engineering and Technology, Vol:6, No:6, 2012
- Amirat, Y., Benbouzid, M. E. H., Al-Ahmar, E., Bensaker, B. and Turri, S. (2009). A Brief Status on Condition Monitoring and Fault Diagnosis in Wind Energy Conversion Systems. Renewable and Sustainable Energy Reviews, 13(9) : 2629-2636
- Barut, M., Hinkkanen, M. and Orłowska-Kowalska, T. (2018). Introduction to the Special Section on State and Parameter Estimation Methods for Sensorless Drives. Power Electronics and Drives, 3(38), pp. 111–113. doi: 10.2478/pead-2018-0018.
- Beltran, B., Benbouzid, M. E. H. and Ahmed-Ali, T. (2009). High-order sliding mode control of a DFIG-based wind turbine for power maximization and grid fault tolerance. In: IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, USA.
- Bonnett, H. A. (1978). Analysis of Winding Failures in Three-Phase Squirrel Cage Induction Motors. IEEE Transactions on Industry Applications, 14(3), pp. 223–226.
- Bouslimani, S., Chrifi-Alaoui, L., Merad, S., Delahoche, L., Bussy, P. and Drid, S. (2022). Stator fault detection of the PMSG under the sliding mode control in wind energy conversion system. In: Conference: 2022 IEEE 21st International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA). Sousse, Tunisia, doi: 10.1109/ STA56120.2022.10019025.
- Bouslimani, S., Drid, S. and Chrifi-Alaoui, L. (2019). Sensorless Control and Diagnosis of Synchronous-Generator used in Wind Energy Conversion System Under Inter Turn Short-Circuit Fault. International Journal of Power and Energy Conversion (IJPEC), 10(4), p. 480. doi: 10.1504/ IJPEC.2019.10012581.
- Bouslimani, S., Drid, S., Chrifi-Alaoui, L., Bussy, P. and Hamzaoui, M. (2016). Inter-turn faults detection using park vector strategy. In: The 17th International Conference on Sciences and Techniques of Automatic Control & Computer Engineering (STA), Sousse, Tunisia, 18–21 December 2016. doi: 10.1109/STA.2016.7952082.
- Brandao, R. M., Carvalho, J. B. and Barbosa, F. M. (2008). Fault detection on wind generators. In: 43rd International Universities Power Engineering Conference (UPEC). Padua, Italy.
- Costa, M. A. A., Braga-Filho, E. R. and Lima, A. M. N. (2013). Designing a low cost high performance permanent magnet motor drive system. In: IECON 2013 – 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, 10–13 November 2013, pp. 2738–2743. doi: 10.1109/IECON.2013.6699564.
- Ekanayake, J. B., Holdsworth, L., Wu, X. G. and Jenkins, N. (2003). Dynamic Modeling of Doubly Fed Induction Generator Wind Turbines. IEEE Transaction on Power System, 18(2), pp. 803–809.
- Fetene, Y. and Shibeshi, D. (2020). Fractional Order Sliding Mode Speed Control of Feedback Linearized Induction Motor. Power Electronics and Drives, 5(40), pp. 109–122. doi: 10.2478/pead-2020-0010.
- Ghosh, B. K. (1986). Simultaneous Partial Pole Placement: New Approach to Multimode System Design. IEEE Transactions on Automatic Control, AC-31, pp. 440–443.
- Hajji, S., Chehida, R. B., Zayani, H., Bouaziz, N. and Agrebi Zorgani, Y. (2020). Sensorless Induction Motor Drive Based on Model Reference Adaptive System Scheme Utilising a Fictitious Resistance. Power Electronics and Drives, 5(40), pp. 199–213. doi: 10.2478/pead-2020-0015.
- Kallesoe, C. S., Vadstrup, P., Rasmussen, H. and Izadi-Zamanabadi, R. (2004). Estimation of Stator Winding Faults in Induction Motors using an Adaptive Observer Scheme. IEEE Industry Applications Conference, 2, pp. 1225–1232. doi: 10.1109/IAS.2004.1348569.
- Meradi, S., Benmansour, K., Herizi, K., Tadjine, M. and Boucherit, M. S. (2013). Sliding Mode and Fault Tolerant Control For Multicell Converter Four Quadrants. Electric Power Systems Research, 95, 128–139. doi: 10.1016/j.epsr.2012.08.014.
- Meradi, S., Benmansour, K., Tadjine, M. M. S. and Boucherit, Z. (2022). Observability Concept Analysis for Power Flying Capacitors of Multicells Converters. Electric Power Components and Systems, 49(11-12), pp. 1021–1033. doi: 10.1080/15325008.2021.2013994.
- Nguyen, H. M. and Naidu, D. S. (2011) Advanced control strategies for wind energy systems. In: IEEE PES Power Systems Conference & Exposition (PSCE), Phoenix, 20–23 March 2011, pp. 1–8. doi: 10.1109/ PSCE.2011.5772514.
- Robyns, B. (1992). Commande numerique desmoteurs asynchrone et asynchrone’, Seminaire sur les entrainements à vitesse variable’, Rabat, Maroc.
- Utkin, V., Guldner, J. and Shi, J. (2009). Sliding Mode Control in Electro-Mechanical Systems. CRC Press, Boca Raton, Taylor and Francis Group.
- Wang, Y. and Deng, Z. (2012). Hybrid Excitation Topologies and Control Strategies of Stator Permanent Magnet Machines for DC Power System. IEEE Transactions on Industrial Electronics, 59(12), pp. 4601–4616. doi: 10.1109/TIE.2012.2183842.
- Weeber, K. R., Shah, M. R., Sivasubramaniam, K., El-Refaie, A., Qu, R., Stephens, C. and Galioto, S. (2010). Advanced permanent magnet machines for a wide range of industrial applications. In: Proceedings of IEEE PES General Meeting, pp. 1–6, Minneapolis, MN, USA, July 2010.
- Yin, M., Li, G., Zhou, M. and Zhao, C. (2007). Modeling of the wind turbine with a permanent magnet synchronous generator for integration. In: IEEE Power Engineering Society General Meeting, Tampa, 24–28 June 2007, pp. 1–6. doi: 10.1109/ PES.2007.385982.