References
- Bedetti, N., Calligaro, S. and Petrella, R. (2015). Self-Commissioning of Inverter Dead-Time Compensation by Multiple Linear Regression Based on a Physical Model. IEEE Transactions on Industry Applications, 51(5), pp. 3954–3964.
- Ben-Brahim, L. (1998). The analysis and compensation of dead-time effects in three phase PWM inverters. In: Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society IECON ‘98, Aachen, Germany, 31 August, 1998. Vol. 32, pp. 792–797.
- Beniak, R. and Rogowski, K. (2016). A Method of Reducing Switching Losses in Three-Level NPC Inverter. Power Electronics and Drives, 1(36), No. 2, pp. 55–63.
- Berg, M. and Roinila, T. (2020). Nonlinear Effect of Dead Time in Small-Signal Modeling of Power-Electronic System Under Low-Load Conditions. IEEE Journal of Emerging and Selected Topics in Power Electronics, 8(4), pp. 3204–3213.
- Bhowmick, S., Mukherjee, D., Maiti, S. and Chakraborty, C. (2021). Grid-Tied Neutral Point Clamped based Centralised Photovoltaic Inverter with Improved DC Link Voltage Balancing and Harmonic Minimisation Control. Power Electronics and Drives, 6(41), pp. 185–203.
- Chierchie, F., Stefanazzi, L., Paolini, E. E. and Oliva, A. R. (2014). Frequency Analysis of PWM Inverters with Dead-Time for Arbitrary Modulating Signals. IEEE Transactions on Power Electronics, 29(6), pp. 2850–2860.
- Choi, C., Cho, K. and Seok, J. (2007). Inverter Nonlinearity Compensation in the Presence of Current Measurement Errors and Switching Device Parameter Uncertainties. IEEE Transactions on Power Electronics, 22(2), pp. 576–583.
- Herran, M. A., Fischer, J. R., Gonzalez, S. A., Marcos, G., Judewicz, M. G., Daniel, O. and Carrica, D. O. (2013). Adaptive Dead-Time Compensation for Grid-Connected PWM Inverters of Single-Stage PV Systems. IEEE Transactions on Power Electronics, 28(6), pp. 2816–2825.
- Hwang, S. and Kim, J. (2010). Dead Time Compensation Method for Voltage-Fed PWM Inverter. IEEE Transactions on Energy Conversion, 25(1), pp. 1–10.
- Jena, K., Gupta, K. K., Bhatnagar, P., Jain, S. K., Stala, R., Waradzyn, Z., Piróg, S., Penczek, A., Mondzik, A. and Skała, A. (2022). Single-Source Three-Phase Switched-Capacitor-based MLI. Power Electronics and Drives, 7(42), pp. 197–209.
- Kim, H., Kim, K. and Youn, M. (2003). On-Line Dead-Time Compensation Method Based on Time Delay Control. IEEE Transactions on Control Systems Technology, 11(2), pp. 279–285.
- Kim, S. and Park, S. (2007). Compensation of Dead-Time Effects Based on Adaptive Harmonic Filtering in the Vector-Controlled AC Motor Drives. IEEE Transactions on Industrial Electronics, 54(3), pp. 1768–1777.
- Kumar, M. (2018). Time-Domain Characterization of Digitized PWM Inverter with Dead-Time Effect. IEEE Transactions on Circuits and Systems I: Regular Papers, 65(10), pp. 3592–3601.
- Leggate, D. and Kerkman, R. J. (1997). Pulse-Based Dead-Time Compensator for PWM Voltage Inverters. IEEE Transactions on Industrial Electronics, 44(2), pp. 191–197.
- Lin, J. (2002). A New Approach of Dead-Time Compensation for PWM Voltage Inverters. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 49(4), pp. 476–483.
- Liu, G., Wang, D., Jin, Y., Wang, M. and Peng Zhang, P. (2017). Current-Detection-Independent Dead-Time Compensation Method Based on Terminal Voltage A/D Conversion for PWM VSI. IEEE Transactions on Industrial Electronics, 64(10), pp. 7689–7699.
- Munoz, A. R. and Lipo, T. A. (1999). On-Line Dead-Time Compensation Technique for Open-Loop PWM-VSI Drives. IEEE Transactions on Power Electronics, 14(4), pp. 683–689.
- Rąbkowski, J. and Kopacz, R. (2018). Extended T-type Inverter. Power Electronics and Drives, 3(38), No. 1, pp. 55–64.
- Roomi, M. M. (2019). An Overview of Carrier-based Modulation Methods for Z-Source Inverter. Power Electronics and Drives, 4(39), pp. 15–31.
- Seyyedzadeh, S. M., Mohamadian, S., Siami, M. and Shoulaie, A. (2019). Modeling of the Nonlinear Characteristics of Voltage Source Inverters for Motor Self-Commissioning. IEEE Transactions on Power Electronics, 34(12), pp. 12154–12164.
- Seyyedzadeh, S. M. and Shoulaie, A. (2019). Accurate Modeling of the Nonlinear Characteristic of a Voltage Source Inverter for Better Performance in Near Zero Currents. IEEE Transactions on Industrial Electronics, 66(1), pp. 71–78.
- Shen, Z. and Jiang, D. (2019). Dead-Time Effect Compensation Method Based on Current Ripple Prediction for Voltage-Source Inverters. IEEE Transactions on Power Electronics, 34(1), pp. 971–984.
- Tang, Z. and Akin, B. (2017). Suppression of Dead-Time Distortion through Revised Repetitive Controller in PMSM Drives. IEEE Transactions on Energy Conversion, 32(3), pp. 918–930.
- Wu, C. M., Lau, W. H. and Chung, H. S. (1999). Analytical Technique for Calculating the Output Harmonics of an H-Bridge Inverter with Dead Time. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 46(5), pp. 617–627.
- Yu, Q., Lemmen, E., Wijnands, C. G. E. and Vermulst, B. (2021). Output Spectrum Modeling of an H-Bridge Inverter with Dead-Time Based on Switching Mode Analysis. IEEE Transactions on Power Electronics, 36(10), pp. 11344–11356.
- Zhao, H., Wu, Q. M. G. and Kawamura, A. (2004). An Accurate Approach of Nonlinearity Compensation for VSI Inverter Output Voltage. IEEE Transactions on Power Electronics, 19(4), pp. 279–285.