References
- Abdelrahem, M., Rodríguez, J. and Kennel R. (2020). Improved Direct Model Predictive Control for Grid-Connected Power Converters. Energies, 13, p. 2597.10.3390/en13102597
- Adamczyk, M. and Orlowska-Kowalska, T. (2019). Virtual Current Sensor in the Fault-Tolerant Field-Oriented Control Structure of an Induction Motor Drive. Sensors, 19, p. 4979.10.3390/s19224979689160831731676
- Bahri, I., Naouar, M., Slama-Belkhodja, I. and Monmasson, E. (9-12.09.2007). FPGA-based FDI of faulty current sensor in current controlled PWM converters. In: The International Conference on “Computer as a Tool”. Warszawa: EUROCON.10.1109/EURCON.2007.4400529
- Berriri, H., Naouar, M. W. and Slama-Belkhodja, I. (2012). Easy and Fast Sensor Fault Detection and Isolation Algorithm for Electrical Drives. IEEE Trans. on Power Electronics, 27(2), pp. 490–499.10.1109/TPEL.2011.2140333
- Betta, G. and Pietrosanto, A. (2000). Instrument Fault Detection and Isolation: State of the Art and New Research Trends. IEEE Transactions on Instrumentation and Measurement. 49(1), pp. 100–107.10.1109/19.836318
- Blanke, M., Kinnaert, M. and Lunze, J. (2003). Diagnosis and Fault-Tolerant Control: Springer-Verlag.10.1007/978-3-662-05344-7
- Choi, J. and Lee, S. J. (2020). A Sensor Fault-Tolerant Accident Diagnosis System. Sensors, 20, p. 5839.10.3390/s20205839760257133076440
- Dybkowski, M. and Klimkowski, K. (25-30.09.2016). Stator current sensor fault detection and isolation for vector controlled induction motor drive. In: 2016 IEEE International Power Electronics and Motion Control Conference (PEMC). Varna, Bulgaria: IEEE, pp. 1097-–1102.
- Fuchs, F. W. (2003). Some diagnosis methods for voltage source inverters in variable speed drives with induction machines-a survey. IECON’03. 29th Annual Conference of the IEEE Industrial Electronics Society (IEEE Cat. No. 03CH37468). Vol. 2. IEEE.10.1109/IECON.2003.1280259
- Gaeid, K. S. and Ping, H. W. (2011). Fault Tolerant Control of Induction Motor. Modern Applied Science, 5(4), pp. 83–94.10.5539/mas.v5n4p83
- Isermann, R. (2006). Fault Diagnosis Systems. An Introduction from Fault Detection to Fault Tolerance. New York: Springer.10.1007/3-540-30368-5
- Jankowska, K. and Dybkowski, M. (2021). A Current Sensor Fault Tolerant Control Strategy for PMSM Drive Systems Based on Cri Markers. Energies, 14(12), art. 3443, pp. 1–18.10.3390/en14123443
- Jankowska, K. and Dybkowski, K. (2022). Experimental Analysis of the Current Sensor Fault Detection Mechanism Based on Cri Markers in the PMSM Drive System. Applied Sciences, 12(9), art. 9405, pp. 1–18.10.3390/app12199405
- Jiang, L. (2011). Sensor Fault Detection and Isolation using System Dynamics Identification Techniques. PhD thesis. The University of Michigan.
- Jiang, J. and Xiang, Y. (2012). Fault-Tolerant Control Systems: A Comparative Study Between Active and Passive Approaches. Annual Reviews in Control, 36(1), pp. 60–72.10.1016/j.arcontrol.2012.03.005
- Jung, J.-H., Ku, H.-K., Son, Y.-D. and Kim, J.-M. (2019). Open-Switch Fault Diagnosis Algorithm and Tolerant Control Method of the Three-Phase Three-Level NPC Active Rectifier. Energies, 12, p. 2495.10.3390/en12132495
- Kaźmierowski, M. P. and Tunia, H. (1994). Automatic Control of Converter-Fed Driver. Warsaw, Amsterdam, New York, Tokyo: PWN-Elsevier Science Publishers.
- Knapczyk, M. and Pienkowski, K. (2010). Sliding-Mode Virtual Flux-Oriented Control of PWM Rectifier with DC-Bus Voltage and Current Sensors. Variations, 4(6), p. 7.
- Kowalski, C. T., Wierzbicki, R., Wolkiewicz M. (2013). Stator and Rotor Faults Monitoring of the Inverter-Fed Induction Motor Drive using State Estimators, Automatika, Vol 54, No 3.10.7305/automatika.54-3.167
- Lee, K. S. and Ryu, J. S. (2003). Instrument Fault Detection and Compensation Scheme for Direct Torque Controlled Induction Motor Drivers. IEE Proceedings-Control Theory and Applications, 150(4), pp. 376–382.10.1049/ip-cta:20030596
- Patan, K., Patan, M. and Klimkowicz, K. (2020). Sensor Fault-Tolerant Control Design for Magnetic Brake System. Sensors, 20, p. 4598.10.3390/s20164598747228732824346
- Patel, A. and Ferdowsi, M. (2009). Current Sensing for Auto-motive Electronics—A Survey. IEEE Transactions on Vehicular Technology, 58(8), pp. 4108–4119.10.1109/TVT.2009.2022081
- Shicai, F. and Jianxiao, Z. (2-5.06.2012). Sensor fault detection and fault tolerant control of induction motor drivers for electric vehicles. In: IEEE 7th Int. Power Electronics and Motion Control Conference—ECCE Asia. China, pp. 1306–1309.
- Tallam, R. M., Lee, S. B., Stone, G. C., Kliman, G. B., Yoo, J. Y., Habetler, T. G. and Harley, R. G. (2007). A Survey of Methods for Detection of Stator Related Faults in Induction Machines. IEEE Transactions on Industry Applications, 43(4), pp. 920–933.10.1109/TIA.2007.900448
- Tsai, M.-F., Tseng, C.-S. and Lin, B.-Y. (2020). Phase Voltage-Oriented Control of a PMSG Wind Generator for Unity Power Factor Correction. Energies, 13, p. 5693.10.3390/en13215693