References
- Kelly, K.J., Abraham, T., Bennion, K., Bharathan, D., Narumanchi S., O’Keef, M. (2007). Assessment of Thermal Control Technologies for Cooling Electric Vehicle Power Electronics. In: Proceedings of 2004 23rd International Electric Vehicle Symposium, Anaheim, California, USA [Online]. Available at: https://www.nrel.gov/transportation/assets/pdfs/42267.pdf
- Bierhoff, M. H. and Fuchs, F. W. (2004). Semiconductor Losses in Voltage Source and Current Source IGBT Converters Based on Analytical Derivation. In: Proceedings of 2004 IEEE 35th Annual Power Electronics Specialists Conference IEEE Cat, Aachen, Germany, pp. 2836–2842.10.1109/PESC.2004.1355283
- Bolvashenkov, I, Kammermann, J. and Herzog, H. G. (2016). Research on Reliability and Fault Tolerance of Multi-phase Traction Electric Motors Based on Markov Models for Multi-state Systems. In: Proceedings of International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM. Anacapri, pp. 1166–1171.10.1109/SPEEDAM.2016.7525928
- Bolvashenkov, I., Kammermann, J., Lahlou, T. and Herzog, H. G. (2016). Comparison and Choice of a Fault Tolerant Inverter Topology for the Traction Drive of an Electrical Helicopter. In: Proceedings of International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference. ESARS-ITEC, Toulouse, France, pp. 1–6.10.1109/ESARS-ITEC.2016.7841328
- Bryant, A. T., Mawby, P. A., Palmer, P. R., Santi, E. and Hudgins, J. L. (2008). Exploration of Power Device Reliability Using Compact Device Models and Fast Electrothermal Simulation. IEEE Transactions on Industrial Applications, 44(3), pp. 894–903.10.1109/TIA.2008.921388
- Ciappa, M., Carbognani, F. and Fichtner, W. (2003). Lifetime Prediction and Design of Reliability Tests for High-power Devices in Automotive Applications. IEEE Transactions on Device and Materials Reliability, 3(4), pp. 191–196.10.1109/TDMR.2003.818148
- Ciappa, M., Carbognani, F. and Fichtner, W. (2013). Lifetime Prediction and Design of Reliability Tests for High-Power Devices in Automotive Applications. IEEE Transactions on Device and Materials Reliability, 3(4), pp. 191–196.
- Dominguez-Garcia, A. D. and Krein, P. T. (2008). Integrating Reliability into the Design of Fault-Tolerant Power Electronics Systems. In: Proceedings of IEEE Power Electronics Specialists Conference, Rhodes, Greece, pp. 2665–2671.10.1109/PESC.2008.4592345
- Drofenik, U. and Kolar, J. W. (2003). Thermal Analysis of a Multi-chip Si/SiC-power Module for Realization of a Bridge Leg of a 10 kW Vienna Rectifier. In: Proceedings of International Conference on Telecommunications Energy (INTELEC ‘03). Yokohama, Japan, pp. 826–833.
- Ehsani, M., Gao, Y. and Emadi, A. (2009). Modern Electric, Hybrid Electric, and Fuel Cell Vehicles: Fundamentals, Theory, and Design. 2nd ed. Boca Raton, FL, USA: CRC Press, ser. Power Electronics and Applications Series.
- Garg, P., Essakiappan, S., Krishnamoorthy, H. S. and Enjeti, P. N. (2015). A Fault-Tolerant Three-Phase Adjustable Speed Drive Topology With Active Common-Mode Voltage Suppression. IEEE Transactions on Power Electronics, 30(5), pp. 2828–2839.10.1109/TPEL.2014.2361905
- Hirschmann, D., Tissen, D., Schroder, S. and De Doncker, R. W. (2007). Reliability Prediction for Inverters in Hybrid Electrical Vehicles. IEEE Transactions on Power Electronics, 22(6), pp. 2511–2517.10.1109/TPEL.2007.909236
- IEC TR 62380. (2004). Reliability Data Handbook-Universal Model for Reliability Prediction of Electronics Components, PCBs and Equipment, First Edition. (Formerly RDF 2000 (UTE C 80-810)).
- Jahdi, S., Alatise, O., Fisher, C., Ran, L. and Mawby, P. (2014). An Evaluation of Silicon Carbide Unipolar Technologies for Electric Vehicle Drive-Trains. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2(3), pp. 517–528.10.1109/JESTPE.2014.2307492
- Jung, S. Y., Hong, J. and Nam, K. (2013). Current Minimizing Torque Control of the IPMSM Using Ferrari’s Method. IEEE Transactions on Power Electronics, 28(12), pp. 5603–5617.10.1109/TPEL.2013.2245920
- Lambilly, H. D. and Keser, H. O. (1993). Failure Analysis of Power Modules: A Look at the Packaging and Reliability of Large IGBTs. IEEE Transactions on Components, Hybrids, and Manufacturing Technology, 16(4), pp. 412–417.10.1109/33.237930
- Levi, E. (2008). Multiphase Electric Machines for Variable-Speed Applications. IEEE Transactions on Industrial Electronics, 55(5), pp. 1893–1909.10.1109/TIE.2008.918488
- Listwan, J. (2018). Application of Super-Twisting Sliding Mode Controllers in Direct Field-Oriented Control System of Six-Phase Induction Motor: Experimental Studies. Power Electronics and Drives, 3(38), pp. 23–34. doi: 10.2478/pead-2018-0013.10.2478/pead-2018-0013
- Listwan, J. A. and Pieńkowski, K. (2016). Direct Field-Oriented Control of Six-Phase Indution Motor with Fuzzy-Logic Speed Controller. Power Electronics and Drives, 1(36), pp. 91–101. doi: 10.5277/PED160107.
- Ma, K., Bahman, A. S., Beczkowski, S. and Blaabjerg, F. (2015). Complete Loss and Thermal Model of Power Semiconductors Including Device Rating Information. IEEE Transactions on Power Electronics, 30(5), pp. 2556–2569.10.1109/TPEL.2014.2352341
- Ma, K., Liserre, M., Blaabjerg, F. and Kerekes, T. (2015). Thermal Loading and Lifetime Estimation for Power Device Considering Mission Profiles in Wind Power Converter. IEEE Transactions on Power Electronics, 30(2), pp. 590–602.10.1109/TPEL.2014.2312335
- Ma, K., Wang, H. and Blaabjerg, F. (2016). New Approaches to Reliability Assessment: Using Physics-of-Failure for Prediction and Design in Power Electronics Systems. IEEE Power Electronics Magazine, 3(4), pp. 28–41.10.1109/MPEL.2016.2615277
- Masrur, M. A. (2008). Penalty for Fuel Economy-System Level Perspectives on the Reliability of Hybrid Electric Vehicles During Normal and Graceful Degradation Operation. IEEE Systems Journal, 2(4), pp. 476–483.10.1109/JSYST.2008.2005714
- Morya, A.K., Gardner,M.C., Anvari,B., Liu,L., Yepes,A.G., Doval-Gandoy,J., Toliyat,H.A. (2019) Wide Bandgap Devices in AC Electric Drives: Opportunities and Challenges. IEEE Transactions on Transportation Electrification, vol. 5, no. 1, pp. 3-20.10.1109/TTE.2019.2892807
- Munim, W. N., Duran, M. J., Che, H. S., Bermúdez, M., González-Prieto, I. and Abd Rahim, N. (2017). A Unified Analysis of the Fault Tolerance Capability in Six-Phase Induction Motor. IEEE Transactions on Power Electronics, 32(10), pp. 7824–7836.10.1109/TPEL.2016.2632118
- Olmi, C., Scuiller, F. and Charpentier, J. F. (2015). Reliability Assessment of an Autonomous Underwater Vehicle Propulsion by Using Electrical Multi-phase Drive. In: Proceedings of Annual Conference of the IEEE Industrial Electronics Society, IECON, Yokohama, pp. 000965–000970.10.1109/IECON.2015.7392224
- Petrone, G., Spagnuolo, G., Teodorescu, R., Veerachary, M. and Vitelli, M. (2008). Reliability Issues in Photovoltaic Power Processing Systems. IEEE Transactions on Industrial Electronics, 55(7), pp. 2569–2580.10.1109/TIE.2008.924016
- Reliability Prediction of Electronic Equipment (1991). Department of Defense, Washington DC, Tech. Rep. MIL-HDBK-217F, Dec. 1991.
- Smater, S. S. and Dominguez-Garcia, A. D. (2010). A Unified Framework for Reliability Assessment of Wind Energy Conversion Systems. In: Proceedings of Power Energy Society. General Meeting, pp. 1–4.10.1109/PES.2010.5589742
- Song, Y. and Wang, B. (2013). Survey on Reliability of Power Electronic Systems. IEEE Transactions on Power Electronics, 28(1), pp. 591–604.10.1109/TPEL.2012.2192503
- Song, Y. and Wang, B. (2014). Evaluation Methodology and Control Strategies for Improving Reliability of HEV Power Electronic System. IEEE Transaction on Vehicular Technology, 63(8), pp. 3661–3676.10.1109/TVT.2014.2306093
- Thermal Equivalent Circuit Models. [Online] Available at: http://www.infineon.com/dgdl/InfineonAN2008_03_Thermal_equivalent_circuit_models-AN-v1.0en.pdf?fileId=db3a30431a5c32f2011aa65358394dd2
- US Department of Energy (DOE). (2015). Office of Energy Efficiency and Renewable Energy (EERE), Electric Drives Technology, 2015 Annual Report [Online].
- Vehicle and Fuel Emissions Testing. Dynamometer Drive Schedules [Online]. Available at: https://www.epa.gov/vehicle-and-fuel-emissions-testing/dynamometer-drive-schedules#main-content
- Wang, H., Liserre, M. and Blaabjerg, F. (2013). Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities. IEEE Transactions on Power Electronics Magazine, 7(2), pp. 17–26.10.1109/MIE.2013.2252958
- Ying, W., Jinsong, K., Ye, Z., Shiyi, J. and Dabing, H. (2009). Study of Reliability and Accelerated Life Test of Electric Drive System. In: Proceedings of IEEE International Power Electronics and Motion Control Conference, Wuhan, China, pp. 1060–1064.
- Zhang, H. (2007). Electro-Thermal Modelling of SiC Power electronics Systems. PhD dissertation. Electrical Engineering Department, The University of Tennessee, Knoxville.