References
- Chauhan, R. K. and Pandey, J. P. (2014). Mitigation of Power Quality Problems Using FACTS Devices: A Review. International Journal of Electronic and Electrical Engineering. ISSN 0974-2174, 7(3), pp. 255–262.
- Hossain, E., Rıda, M., Sanjeevaikumar, P., Selim, A. and Imtiaz, K. (2018). Analysis and Mitigation of Power Quality Issues in Distributed Generation Systems Using Custom Power Devices, IEEE, DOI 10.1109/ACCESS.10.1109/ACCESS.2018.2814981
- IEEE. (2012 December 04). IEEE Recommended Practice for Monitoring Electric Power Quality IEEE Xplore (pp. IEEE Std 1159-1995).
- Johnsoy, D. O. and Hagren, K. A. (2016). Issues of Power Quality in Electrical Systems. International Journal of Energy and Power Engineering, 5(4), pp. 148–154.10.11648/j.ijepe.20160504.12
- Kaur, S. (July 2014). Investigating the Role of DSTATCOM In Distribution Network With Non-Linear Load and Active Load. (Master of Engineering In Power Systems), Thapar University, Patiala-147004.
- Mehta, V. K. (2017 September 14). Principles of Power System, ISBN-13 : 978-8121924962, Publisher : Chand (S.) & Co Ltd, India.
- Nawaz, S. K. G. and Hameed, S. (2013 November). Mitigation of Power Quality Problems by Using D-STATCOM. Paper presented at the International Conference on Electrical Electronics and Computer Science-EECS-17th EEE, QCET, Corpus ID: 210173086.
- Paramar, M. B. S. and Vora, M. S. M. (2015 May). Investigations on Power Quality Improvement in Distribution Network using DSTATCOM. International Journal for Technological Research in Engineering, 2(9), pp 1840-1846.
- Pawar, S. S., Deshpande, A. P., and Meera, M. (2015). Modelling and Simulation of DSTATCOM for Power Quality Improvement in Distribution System Using MATLAB Simulink Tool, International Conference on Energy Systems and Applications(2015), Pune, India. IEEE, DOI: 10.1109/ICESA.2015. 7503344.10.1109/ICESA.2015.7503344
- Praveena, S. & et al. (2017). Performance of Custom Power Devices for Power Quality Improvement. Paper presented at the IEEE International Conference on Power, Control, Signals and Instrumentation Engineering (ICPCSI-2017, Hyderabad, Telengana, India.10.1109/ICPCSI.2017.8391844
- Priyanka, S. Sunitha, R. et al (2017). Power Quality Improvement in Power Distribution System using D-STATCOM. IJESC, 7(6), pp. 13298–13302.
- Reid, W. E. (2016 June). Power Quality Issues-Standards and Guidelines. IEEE Transactions on Industry Applications, 32(3, pp 625-632.10.1109/28.502175
- Saradva, P. M., Kadivar, K. T., Pamdya, M. H., and Rana, A. J. (2016). Application of D-STATCOM to Control Power Flow in Distribution Line. IEEE, Nagercoil, India, pp. 479–484.10.1109/ICEETS.2016.7583802
- Sedaghati, R., Afroozi, N. M., and Nemati, Y. (Dec 2013). A Survey of Voltage Sags and Voltage Swells Phenomena in Power Quality Problems. IJSRM, 1(9), pp. 458–462.
- Shah, S., and Parsa, L. (2016). Impedance Modeling of Three-Phase Voltage Source Converters in DQ, Sequence, and Phasor Domains. IEEE, 32(3), pp. 1139-1150, DOI: 10.1109.10.1109/TEC.2017.2698202
- Shahewar, S., Maloth, R. and Sushmalatha, S. (2014 January). Power Quality Issues and their Mitigation Techniques. International Journal of Industrial Electronics and Electrical Engineering, 2(1), pp. 148–154.
- Tavakoli Bina, M. and Pashajavid, E. (2009). An Efficient Procedure to Design Passive LCL-Filters for Active Power Filters. Electric Power Systems Research, 79(4), pp. 606–614.10.1016/j.epsr.2008.08.014
- Teke, A., Yolda, Y. and Latran, M. B. (2015 June). Step by Step Design Procedure of a Distribution Static Synchronous Compensator (DSTATCOM). Çukurova University Journal of the Faculty of Engineering and Architecture, 30(1), pp. 117–131.10.21605/cukurovaummfd.242807
- Xia, Z., Shi, L. and Yang, X. (2014). Parameters design and control strategy of cascade STATCOM based on LCL filter. International Journal of Control and Automation, 7(1), pp. 307–320.10.14257/ijca.2014.7.1.27