References
- Baranski, M., Szelag, W. and Jedryczka, C. (2017). Influence of Temperature on Partial Demagnetization of the Permanent Magnets During Starting Process of Line Start Permanent Magnet Synchronous Motor. In: 2017 International Symposium on Electrical Machines (SME), Naleczow, Poland, 18–21 June 2017, IEEE, pp. 1–6.
- Casadei, D., Filippetti, F., Mengoni, M., Gritli, Y., Serra, G., Tani, A. and Zarri, L. (2012). Detection of Magnet Demagnetization in Five-Phase Surface-Mounted Permanent Magnet Generators. In: 2012 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG), Aalborg, Denmark, 25–28 June 2012, IEEE, pp. 841–848.
- Cusido, J., Rosero, J. A., Ortega, J. A., Garcia, A. and Romeral, L. (2006). Induction Motor Fault Detection by Using Wavelet Decomposition on dq0 Components. IEEE International Symposium on Industrial Electronics, 3, pp. 2406–2411.
- Fei, W., Luk, P. C. K., Ma, J., Shen, J. X. and Yang, G. (2009). A high-Performance Line-Start Permanent Magnet Synchronous Motor Amended from A Small Industrial Three-Phase Induction Motor. IEEE Transactions on Magnetics, 45(10), pp. 4724–4727.
- Gieras, J. (2009). Permanent Magnet Motor Technology, 3rd ed., J. F. Gieras, ed., CRC Press, doi:10.1201/9781420064414.10.1201/9781420064414
- Hong, J., Park, S., Hyun, D., Kang, T. J., Lee, S. B., Kral, C. and Haumer, A. (2012). Detection and Classification of Rotor Demagnetization and Eccentricity Faults for PM Synchronous Motors. IEEE Transactions on Industry Applications, IEEE, 48(3), pp. 923–932.
- Kang, G.-H., Hong, J.-P., Kim, G.-T. and Park, J.-W. (2000). Improved Parameter Modeling of Interior Permanent Magnet Synchronous Motor Based on Finite Element Analysis. IEEE Transactions on Magnetics, 36(4), pp. 1867–1870.
- Kim, K. T., Lee, Y. S. and Hur, J. (2014). Transient Analysis of Irreversible Demagnetization of Permanent-Magnet Brushless DC Motor with Interturn Fault Under the Operating State. IEEE Transactions on Industry Applications, IEEE, 50(5), pp. 3357–3364.
- Lee, Y.-S., Kim, K.-T. and Hur, J. (2014). Finite-Element Analysis of the Demagnetization of IPM-Type BLDC Motor with Stator Turn Fault. IEEE Transactions on Magnetics, 50(2), pp. 889–892.
- Le Roux, W., Harley, R. G. and Habetler, T. G. (2003). Detecting Rotor Faults in Permanent Magnet Synchronous Machines. IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, SDEMPED 2003 – Proceedings, 22(1), pp. 198–203.
- Le Roux, W., Harley, R. G. and Habetler, T. G. (2007). Detecting Rotor Faults in Low Power Permanent Magnet Synchronous Machines. IEEE Transactions on Power Electronics, 22(1), pp. 322–328.
- Moon, S., Jeong, H., Lee, H. and Kim, S. W. (2017). Detection and Classification of Demagnetization and Interturn Short Faults of IPMSMs. IEEE Transactions on Industrial Electronics, 64(12), pp. 9433–9441.
- Park, Y., Fernandez, D., Lee, S. B., Hyun, D., Jeong, M., Kommuri, S. K., Cho, C., Reigosa, D. D. and Briz, F. (2019). Online Detection of Rotor Eccentricity and Demagnetization Faults in PMSMs Based on Hall-Effect Field Sensor Measurements. IEEE Transactions on Industry Applications, 55(3), pp. 2499–2509.
- Pramanik, A., Baka, S., Dambhare, S. S., Ugale, R. T. and Chaudhari, B. N. (2014). Induced Pole Rotor Structure for Line Start Permanent Magnet Synchronous Motors. IET Electric Power Applications, 8(4), pp. 131–140.
- Quintal-Palomo, R. E., Gwozdziewicz, M. and Dybkowski, M. (2017). Design and Test of an Internal Permanent Magnet Generator for Small Wind Turbine Applications. In: 2017 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe), Warsaw, Poland, 11–14 September 2017, IEEE, pp. P.1–P.4.
- Randall, R. B. (2011). Vibration-Based Condition Monitoring, Vibration-Based Condition Monitoring: Industrial, Aerospace and Automotive Applications. Chichester, UK: John Wiley & Sons, Ltd, doi:10.1002/9780470977668.10.1002/9780470977668
- Rosu, M., Saitz, J. and Arkkio, A. (2005). Hysteresis Model for Finite-Element Analysis of Permanent-Magnet Demagnetization in A Large Synchronous Motor Under A Fault Condition. IEEE Transactions on Magnetics, 41(6), pp. 2118–2123.
- Ruiz, J. R. R., Garcia Espinosa, A., Romeral, L. and Cusidó, J. (2010). Demagnetization Diagnosis in Permanent Magnet Synchronous Motors Under Non-Stationary Speed Conditions. Electric Power Systems Research, 80(10), pp. 1277–1285.
- Ruoho, S., Dlala, E. and Arkkio, A. (2007). Comparison of Demagnetization Models for Finite-Element Analysis of Permanent-Magnet Synchronous Machines. IEEE Transactions on Magnetics, 43(11), pp. 3964–3968.
- Wang, C., Delgado Prieto, M., Romeral, L., Chen, Z., Blaabjerg, F. and Liu, X. (2016). Detection of Partial Demagnetization Fault in PMSMs Operating under Nonstationary Conditions. IEEE Transactions on Magnetics, IEEE, 52(7), pp. 1–4.
- Whaley, D. M. M., Soong, W. L. L. and Ertugrul, N. (2005). Investigation of Switched-Mode Rectifier for Control of Small-Scale Wind Turbines. Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005, IEEE, 4(4), pp. 2849–2856.
- Yang, W. (2013). Condition Monitoring the Drive Train of a Direct Drive Permanent Magnet Wind Turbine Using Generator Electrical Signals. Journal of Solar Energy Engineering, 136(2), p. 021008.
- Yang, Z., Shi, X. and Krishnamurthy, M. (2014). Vibration monitoring of PM synchronous machine with partial demagnetization and inter-turn short circuit faults. In: 2014 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, USA, 15–18 June 2014, IEEE, pp. 1–6.
- Zawilak, T., Antal, L. and Zawilak, J. (2006). Wpływ obciążenia na odkształcenie prądu w silniku. Maszyny Elektryczne – Zeszyty Problemowe, 75, pp. 1–4.
- Zhou, P., Lin, D., Fu, W. N., Ionescu, B. and Cendes, Z. J. (2006). A General Cosimulation Approach for Coupled Field-Circuit Problems. IEEE Transactions on Magnetics, 42(4), pp. 1051–1054.
- Zhou, P., Lin, D., Xiao, Y., Lambert, N. and Rahman, M. A. (2012). Temperature-Dependent Demagnetization Model of Permanent Magnets for Finite Element Analysis. IEEE Transactions on Magnetics, 48(2), pp. 1031–1034.