References
- Böcker, J. and Buchholz, O. (2013). Can oversampling improve the dynamics of PWM controls? In: Proceedings of 2013 IEEE International Conference on Industrial Technology (ICIT). Cape Town, 25–28 February 2013, pp. 1818–1824.
- El-Refaie, A., Raminosoa, T., Reddy, P., Galioto, S., Pan, D., Grace, K., Alexander, J. and Huh, K. K. (2017). Comparison of Traction Motors that Reduce or Eliminate Rare-Earth Materials. IET Electrical Systems in Transportation, 7, pp. 207–214.
- Gerada, D., Mebarki, A., Brown, N. L., Gerada, C., Cavagnino, A. and Boglietti, A. (2014). High-Speed Electrical Machines: Technologies, Trends, and Developments. IEEE Transactions on Industrial Electronics, 61, pp. 2946-2959.
- Jarzebowicz, L. (2017). Errors of a Linear Current Approximation in High-Speed PMSM Drives. IEEE Transactions on Power Electronics, 32(11), pp. 8254–8257.
- Jarzebowicz, L. and Mirchevski, S. (2017). Modeling the impact of rotor movement on non-linearity of motor currents waveforms in high-speed PMSM drives. In: Proceedings of 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe). Warsaw, 11–14 September 2017.
- Kim, M., Sul, S.-K. and Lee, J. (2014). Compensation of Current Measurement Error for Current-Controlled PMSM Drives. IEEE Transactions on Industry Applications, 50, pp. 3365–3373.
- Kwon, Y.-C., Kim, S. and Sul, S.-K. (2014). Six-Step Operation of PMSM with Instantaneous Current Control. IEEE Transactions on Industry Applications, 50, pp. 2614–2625.
- Li, Z. and Gao, Q. (2018). A Prediction-Based Current Sampling Scheme Using Three Resistors for Induction Motor Drives. IEEE Transactions on Power Electronics, 33, pp. 6082–6092.
- Lu, J., Hu, Y. and Liu, J. (2018). Analysis and Compensation of Sampling Errors in TPFS IPMSM Drives with Single Current Sensor. IEEE Transactions on Industrial Electronics, 66, pp. 3852–3855.
- Oleschuk, V. and Barrero, F. (2014). Standard and Non-Standard Approaches for Voltage Synchronization of Drive Inverters with Space-Vector PWM: A Survey. International Review of Electrical Engineering (IREE), 9, pp. 688–707.
- Persson, E. (2002). Motor current measurement using time-modulated signals. In: Proceedings of the Power Conversion Conference. Osaka, 2–5 April 2002, pp. 716–720.
- Sandre-Hernandez, O., Rangel-Magdaleno, J. and Morales-Caporal, R. (2018). A Comparison on Finite-Set Model Predictive Torque Control Schemes for PMSMs. IEEE Transactions on Power Electronics, 33, pp. 8838–8847.
- Sepulchre, L., Fadel, M. and Pietrzak-David, M. (2016). Improvement of the digital control of a high speed PMSM for vehicle application. In: Proceedings of 2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies (EVER). Monte-Carlo, 6–8 April 2016.
- Sobczyński, D. (2016). Review of Solutions Used in High Speed Induction Motor Drives Operating in Household Appliances. Power Electronics and Drives, 1(36), pp. 27–49.
- Tarczewski, T., Skiwski, M., Grzesiak, L. M. and Zieliński, M. (2018). PMSM Servo-Drive Fed by SIC MOSFETs Based VSI. Power Electronics and Drives, 3(38), pp. 35–45.
- Vukosavić, S. N., Perić, L. S. and Levi, E. (2016). AC Current Controller with Error-Free Feedback Acquisition System. IEEE Transactions on Energy Conversion, 31, pp. 381–391.
- Wang, W., Fan, Y., Chen, S. and Zhang, Q. (2018). Finite control set model predictive current control of a five-phase PMSM with virtual voltage vectors and adaptive control set. CES Transactions on Electrical Machines and Systems, 2, pp. 136–141.
- Wang, H., Yang, M., Niu, L. and Xu, D. (2010). Current-loop bandwidth expansion strategy for permanent magnet synchronous motor drives. In: Proceedings of the 5th IEEE Conference on Industrial Electronics and Applications (ICIEA), Taichung, 15–17 June 2010, pp. 1340–1345.
- Wolf, C. M., Degner, M. W. and Briz, F. (2015). Analysis of Current Sampling Errors in PWM VSI Drives. IEEE Transactions on Industry Applications, 51, pp. 1551–1560.