Universal Speed and Flux Estimator for Induction Motor

Dybkowski, Mateusz

doi:10.2478/pead-2018-0007

Abstract

In the paper, the concept of universal speed and flux estimator with additional parameters estimators is presented. Proposed solution is based on the Model Reference Adaptive System (MRAS) type flux and speed estimator and can be used in different industrial systems (especially in the automotive applications). Induction Motor (IM) parameters are estimated using the systems based only on simple simulators and adaptive systems (voltage model and current model). Proposed system was tested in the sensorless induction motor drive with the Direct Field Oriented Control (DFOC) algorithm. Simulation and experimental results are presented in the paper.

References

Alonge, F., Cangemi, T., D’Ippolito, F., Fagiolini, A. and Sferlazza, A. (2015). Convergence Analysis of Extended Kalman Filter for Sensorless Control of Induction Motor. IEEE Transactions on Industrial Electronics, 62(4), pp. 2341-2352.10.1109/TIE.2014.2355133
Search in Google Scholar Back to article
Auger, F., Hilairet, M., Guerrero, J. M., Monmasson, E., Orlowska-Kowalska, T. and Katsura, S. (2013). Industrial Applications of the Kalman Filter: A Review. IEEE Transactions on Industrial Electronics, 60(12), pp. 5458-5471.10.1109/TIE.2012.2236994
Search in Google Scholar Back to article
Barut, M. (2010). Bi-input-extended Kalman Filter- Based Estimation Technique for Speed-Sensorless Control of Induction Motors. Energy Conversion and Management, 51(10), pp. 2032-2040.10.1016/j.enconman.2010.02.037
Search in Google Scholar Back to article
Barut, M., Bogosyan, S. and Gokasan, M. (2008). Experimental Evaluation of Braided EKF for Sensorless Control of Induction Motors. IEEE Transactions on Industrial Electronics, 55(2), pp. 620-632.10.1109/TIE.2007.911956
Search in Google Scholar Back to article
Barut, M., Demir, R. and Inan, R. (2012). Real-Time Implementation of Bi Input-Extended Kalman Filter- Based Estimator for Speed-Sensorless Control of Induction Motors. IEEE Transactions on Industrial Electronics, 59(2), pp. 4197-4206.10.1109/TIE.2011.2178209
Search in Google Scholar Back to article
Dybkowski, M. (2013). Estimation of Speed in a Vector Controlled Induction Motor Drive - Selected Problems. Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej nr 67. seria Monografie nr 20. Wrocław (in Polish).
Search in Google Scholar Back to article
Dybkowski, M. and Orlowska-Kowalska, T. (2010). Speed sensorless induction motor drive with magnetizing reactance estimation. In: 2010 14th International Power Electronics and Motion Control Conference (EPE/PEMC), Ohrid, Macedonia, on CD, 2010.10.1109/EPEPEMC.2010.5606803
Search in Google Scholar Back to article
Dybkowski, M. and Orlowska-Kowalska, T. (2012). Performance of the speed sensorless induction motor drive for traction application with MRAS type speed and flux estimator, In: 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). Brasov, Romania: IEEE, pp. 477-481.10.1109/OPTIM.2012.6231871
Search in Google Scholar Back to article
Dybkowski, M., Klimkowski, K. and Orlowska-Kowalska, T. (2014). Speed sensor fault tolerant direct torque control of induction motor drive. In: 2014 16th International Power Electronics and Motion Control Conference and Exposition (PEMC). Warna, Bulgaria: IEEE, 2014, pp. 679-684.10.1109/EPEPEMC.2014.6980574
Search in Google Scholar Back to article
Holtz, J. (2006). Sensorless Control of Induction Machines-With or Without Signal Injection? IEEE Transactions on Industrial Electronics, 53(1), pp. 7-30.10.1109/TIE.2005.862324
Search in Google Scholar Back to article
Isermann, R. (2006). Fault Diagnosis Systems. An Introduction from Fault Detection to Fault Tolerance. New York: Springer.10.1007/3-540-30368-5
Search in Google Scholar Back to article
Kubota, H., Matsuse, K. and Nakano, T. (1984). New control method of inverter - fed induction motor drive by using state observer with rotor resistance identification. In: IEEE/IAS Annual Meeting, Conference Record, pp. 601-606.
Search in Google Scholar Back to article
Levi, E., Sokola, M. and Vukosavic, S. N. (2000). A Method for Magnetizing Curve Identification in Rotor Flux Oriented Induction Machines. IEEE Transactions on Energy Conversion, 15(2), pp. 157-162.10.1109/60.866993
Search in Google Scholar Back to article
Orlowska-Kowalska, T. (2003). Sensorless Induction Motor Drives. Wroclaw, Poland: Wroclaw University of Technology Press.
Search in Google Scholar Back to article
Orlowska-Kowalska, T. and Dybkowski, M. (2010). Stator-Current-Based MRAS Estimator for A Wide Range Speed-Sensorless Induction-Motor Drive. IEEE Transactions on Industrial Electronics, 57(4), pp. 1296-1308.10.1109/TIE.2009.2031134
Search in Google Scholar Back to article
Orlowska-Kowalska, T., Tarchala, G. and Dybkowski, M. (2014). Sliding-Mode Direct Torque Control and Sliding-Mode Observer with A Magnetizing Reactance Estimator for the Field-Weakening of the Induction Motor Drive. Mathematics and Computers in Simulation, 98, pp. 31-45.10.1016/j.matcom.2013.05.012
Search in Google Scholar Back to article
Proca, A. B. and Keyhani, A. (2002). Identification of Variable Frequency Induction Motor Models from Operating Data. IEEE Transactions on Energy Conversion, 17(1), pp. 24-31.10.1109/60.986433
Search in Google Scholar Back to article
Rasmusen, H., Kundsten, M. and Tonnes, M. (1999). Parameter Estimation of Inverter and Motor Model at Standstill Using Measured Current Only. IEEE Transactions on Industrial Electronics, 46(1), pp. 139-149.
Search in Google Scholar Back to article
Schauder, C. (1992). Adaptive Speed Identification for Vector Control of Induction Motors without Rotational Transducers. IEEE Transactions on Industry Applications, IA-28(5), pp. 1054-1060.10.1109/28.158829
Search in Google Scholar Back to article
Smith, A. N., Gadoue, S. M. and Finch, J. W. (2016). Improved Rotor Flux Estimation at Low Speeds for Torque MRAS-Based Sensorless Induction Motor Drives. IEEE Transactions on Energy Conversion, 31(1), pp. 270-282.10.1109/TEC.2015.2480961
Search in Google Scholar Back to article
Tarchała, G., Dybkowski, M. and Orłowska-Kowalska, T. (2011). Analysis of the chosen speed and flux estimators for sensorless induction motor drive. In: Industrial Electronics (ISIE). 2011 IEEE International Symposium on, CD, Gdańsk.10.1109/ISIE.2011.5984213
Search in Google Scholar Back to article
Vasić, V., Vukosavic, N. and Levi, E. (2003). A Stator Resistance Estimation Scheme for Speed Sensorless Rotor Flux Oriented Induction Motor Drives. IEEE Transactions on Energy Conversion, 18(4), pp. 476-483.10.1109/TEC.2003.816595
Search in Google Scholar Back to article
Zorgani, Y. A., Koubaa, Y. and Boussak, M. (2010). Simultaneous Estimation of Speed and Rotor Resistance in Sensorless ISFOC Induction Motor Drive Based on MRAS Scheme. Roma: ICEM.
Search in Google Scholar Back to article

Universal Speed and Flux Estimator for Induction Motor

Abstract

Paradigm

My account