References
- International Organization for Standardization. (1977). Measurement of water flow in closed conduits – Tracer methods – Part 7: Transit time method using radioactive tracers. ISO 2975-7:1977.
- International Organization for Standardization. (2005). Measurement of fluid flow – Procedures for the evaluation of uncertainties. ISO 5168:2005.
- British Standard. (1980). Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. Transit time method using radioactive tracers. BS 5857-1.5:1980.
- Alberta Energy Regulator. (2018). Measurement requirements for oil and gas operations. Directive 017.
- Genesis Oil & Gas Consultants Ltd. (2007). Uncertainty assessment of quality measurements in relation to EU ETS requirements – guidance for offshore oil and gas production facilities – proposals for flow meter uncertainty values. Aberdeen. (GENESIS JOB NUMBER: J-70695/A).
- International Organization for Standardization. (1995). Petroleum and liquid petroleum products – Calculation of oil quantities – Part 2: Dynamic measurement. ISO 4267-2:1995.
- UK Oil & Gas Authority. (2015). Guidance notes for petroleum measurement. Issue 9.2. London, UK.
- ANP/INMETRO. (2013). Joint Resolution ANP/INMETRO No. 1. Technical regulation of oil and natural gas measurement. Brasília: DOU.
- Ministry of Industry, Trade, and Tourism. (1997). Regulation. INMETRO, 113/97.
- Ministry of Industry, Trade, and Tourism. (2003). Metrological technical regulation. INMETRO, 64.
- International Atomic Energy Agency. (2004). Radiotracer applications in industry – a guidebook. Vienna: IAEA. (Technical Reports Series no. 423).
- International Atomic Energy Agency. (2008). Radiotracer residence time distribution method for industrial and environmental applications. Vienna: IAEA. (Training Course Series no. 31).
- Kuoppamäki, R. (2006). Flow measurement field calibrations by radioisotope tracers in the off-shore, oil and gas industry. In 24th International North Sea Flow Measurement Workshop, 2006. IndMeas Industrial Measurements.
- Yunos, M. A. S. M., Hussain, S. A., & Sipaun, S. M. (2019). Industrial radiotracer application in flow rate measurement and flowmeter calibration using 99mTc and 198Au nanoparticles radioisotope. Appl. Radiat. Isot., 143, 24–28. https://doi.org/10.1016/j.apradiso.2018.10.008
- Kasban, H., Ali, E. H., & Arafa, H. (2017). Diagnosing plant pipeline system performance using radiotracer techniques. Nucl. Eng. Technol., 49(1), 196–208. https://doi.org/10.1016/j.net.2016.08.011.
- Barbour, E. (1969). Potential economic benefits from the use of radioisotopes in flow measurements through high-head turbines and pumps. Washington: US Government Printing Office.
- International Organization for Standardization. (1994). Accuracy (trueness and precision) of measurement methods and results – Part 1: General principles and definitions. ISO 5725-1:1994(E).
- Clayton, C. G. (1965). The measurement of flow of liquids and gases using radioactive isotopes. In Meeting at the Institution of Civil Engineers, London: SW1.
- Argentini, M. (1982). Labelling with iodine – A review of the literature. Switzerland: Federal Institute for Reactor Research.
- Anghileri, L. J. (1965). A new method for the preparation of labeled I131 oleic acid and triolein. Int. J. Appl. Radiat. Isot., 16, 53. DOI: 10.1016/0020-708x(65)90168-7.
- Norma Brasileira. (1945). Determinação do índice de iodo em óleos e gorduras vegetais. ABNT MB 77. Associação Brasileira de Normas Técnicas.
- ASTM International. (2015). Standard test method for determination of iodine value of fat and oils. ASTM D 5554-15. West Conshohocken, PA.
- ASTM International. (2016). Standard practice for dealing with outlying observations. ASTM E178. West Conshohocken, PA.
- Montgomery, D. C., & Runge, G. C. (2002). Applied statistics and probability for engineer (3rd ed.). Arizona, US: John Wiley & Sons, Inc.