Studies on magnetron-sputtered zirconium-silicide coatings deposited on zirconium alloy for the enhancement of their high-temperature oxidation resistance

Wojciech Starosta; Viera K. Semina; Jerzy Smolik; Lech Waliś; Michał Rydzewski; Bożena Sartowska

doi:10.2478/nuka-2018-0009

Abstract

Zirconium alloys used widely in nuclear industry as fuel claddings are prone to violent oxidation in water steam atmosphere in the case of loss of coolant accident (LOCA). Accompanying generation of large quantities of heat and explosive gaseous hydrogen may lead to destruction of nuclear core. As the safety of nuclear installations is of primary importance, intensive research works are conducted on the development of so-called accident tolerant fuels much less prone to oxidation. In this paper, the application of external zirconium-silicide coatings deposited by magnetron sputtering is proposed. The preliminary results of their synthesis and studies of air oxidation properties at elevated temperatures are presented.

References

1. IAEA. (2017). Nuclear technology review 2017. Vienna: International Atomic Energy Agency. (IAEA/NTR/2017).
Search in Google Scholar Back to article
2. Pioro, I. (2016). Handbook on generation IV nuclear reactors. Waltham, MA: Elsevier Ltd.10.1115/1.4035327
Search in Google Scholar Back to article
3. Terrani, K. T., Kiggans, J. O., Silva, C. M., Shih, D., Katoh, Y., & Snead, L. L. (2015). Progress on matrix SiC processing and properties for fully ceramic microencapsulated fuel form. J. Nucl. Mater., 457, 9–17. DOI: 10.1016/j.jnucmat.2014.10.034.10.1016/j.jnucmat.2014.10.034
Open DOI Search in Google Scholar Back to article
4. IAEA. (2014). Accident tolerant fuel concepts. Proceeding of the technical meeting held at the Oak Ridge National Laboratories, USA, 13–16 October 2014. Vienna: International Atomic Energy Agency. (IAEA-TECDOC-1797).
Search in Google Scholar Back to article
5. Zinkle, S. J., Terrani, K. A., Gehin, J. C., Ott, L. J., & Snead, L. L. (2014). Accident tolerant fuels. A perspective. J. Nucl. Mater., 448, 374–379.10.1016/j.jnucmat.2013.12.005
Search in Google Scholar Back to article
6. Morell, P. (2015). Phase 1A Final Report for the AREVA Team Enhanced Accident Tolerant Fuels Concepts. (Report DOE-AFS-0000567). DOI: 10.2172/1172983.10.2172/1172983
Open DOI Search in Google Scholar Back to article
7. Pint, B. A., Terrani, K. A., Yamamoto, Y., & Snead, L. L. (2015). Material selection for accident tolerant fuel cladding. Metall. Mater. Trans. E, 2(3), 190–196. DOI: 10.1007/s40553-015-0056-7.10.1007/s40553-015-0056-7
Open DOI Search in Google Scholar Back to article
8. Kim, H., Yang, J., Kim, W., & Koo, Y. (2016). Development status of accident-tolerant fuel for light water reactors in Korea. Nucl. Eng. Technol., 48, 1–15. https://doi.org/10.1016/j.net.2015.11.011.10.1016/j.net.2015.11.011
Search in Google Scholar Back to article
9. Koo, Y., Yang, J., Park, J., Kim, K., Kim, H., Kim, D., Jung, Y., & Song, K. (2014). KAERI’s development of LWR accident-tolerant fuel. Nucl. Technol., 186(2), 295–304. http://dx.doi.org/10.13182/NT13-89.10.13182/NT13-89
Open DOI Search in Google Scholar Back to article
10. Barrett, K., Bragg-Sitton, S., & Galicki, D. (2012). Advanced LWR nuclear fuel cladding system development trade-off study. Idaho National Laboratory. (INL/EXT-12-27090).
Search in Google Scholar Back to article
11. Kurata, M. (2016). Research and development methodology for practical use of accident tolerant fuel in light water reactors. Nucl. Eng. Technol., 48, 26–32. DOI: https://doi.org/10.1016/j.net.2015.12.004.10.1016/j.net.2015.12.004
Open DOI Search in Google Scholar Back to article
12. Yueh, K., & Terrani, K. A. (2014). Silicon carbide composite for light water reactor fuel assembly applications. J. Nucl. Mater., 448, 380–388. http://dx.doi.org/10.1016/j.jnucmat.2013.12.004.10.1016/j.jnucmat.2013.12.004
Open DOI Search in Google Scholar Back to article
13. Idarraga-Trujillo, I., Le Flem, M., Brachet, J., Le Saux, M., Hamon, D., Mueller, S., Vanderberghe, V., Tupin, M., Papin, E., Monsierot, E., Billard, A., & Schuster, F. (2013). Assessment at CEA of coated nuclear fuel cladding for LWRs with increased margins in LOCA and beyond LOCA conditions. In Top Fuel 2013 September 15–19, 2013, Charlotte, NC, USA (pp. 860–867).
Search in Google Scholar Back to article
14. Rebak, R., Terrani, K., Gassmann, W. P., & Williams, J. B. (2017). Improving nuclear Power plant safety with FeCrAl alloy fuel cladding. MRS Adv., 2(21/22), 1217–1224. https://doi.org/10.1557/adv.2017.5.10.1557/adv.2017.5
Open DOI Search in Google Scholar Back to article
15. Terrani, A. K., Pint, B. A., Kim, Y. J., Unocic, K. A., Silva, C. M., Meyer III, H. M., & Rebak, R. B. (2016). Uniform corrosion of FeCrAl alloys in LWR coolant environments. J. Nucl. Mater., 479, 36–47. http://dx.doi.org/10.1016/j.jnucmat.2016.06.047.10.1016/j.jnucmat.2016.06.047
Open DOI Search in Google Scholar Back to article
16. Yamamoto, Y., Pint, B. A., Terrani, K. A., Field, K. G., Yang, Y., & Snead, L. L. (2015). Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors. J. Nucl. Mater., 467, 703–716. http://dx.doi.org/10.1016/j.jnucmat.2015.10.019.10.1016/j.jnucmat.2015.10.019
Open DOI Search in Google Scholar Back to article
17. Younker, M., & Fratoni, M. (2016) Neutronic evaluation of coating and cladding materials for accident tolerant fuels. Prog. Nucl. Energy, 88, 10–18. http://dx.doi.org/10.1016/j.pnucene.2015.11.006.10.1016/j.pnucene.2015.11.006
Open DOI Search in Google Scholar Back to article
18. Tang, C., Stueber, M., Seifert, H. J., & Steinbruck, M. (2017). Protective coatings on zirconium-based alloys as accident-tolerant fuels (ATF) claddings. Corros. Rev., 35(3), 141–165. DOI: 10.1515/corrrev-2017-0010.10.1515/corrrev-2017-0010
Open DOI Search in Google Scholar Back to article
19. Starosta, W., Barlak, M., Buczkowski, M., Kosińska, A., Sartowska, B., Waliś, L., & Janiak, T. (2015). Analiza mechanizmów tworzenia się oraz właściwości warstw tlenkowych powstających w wyniku rozkładu wody na powierzchni koszulek cyrkonowych oraz zbadanie wpływu modyfikacji struktury warstwy wierzchniej koszulek na procesy generacji wodoru. In J. Michalik, & R. Kocia (Eds.). Analiza procesów generacji wodoru w reaktorze jądrowym w trakcie normalnej eksploatacji i w sytuacjach awaryjnych z propozycjami działań na rzecz podniesienia poziomu bezpieczeństwa jądrowego (pp. 55–72). Warszawa: Institute of Nuclear Chemistry and Technology.
Search in Google Scholar Back to article
20. Mariani, R., Medvedev, P., Porter, D. L., Hayes, S. L., Cole, J. I., & Bai, X. (2013). Novel accident-tolerant fuel meat and cladding. In Top Fuels, September 15–19, 2013, Charlotte, NC, USA (pp. 763–770).
Search in Google Scholar Back to article
21. Yeom, H., Maier, B., Mariani, R., Bai, D., Fronek, S., Xu, P., & Sridharan, K. (2017). Magnetron sputter deposition of zirconium-silicide coating for mitigating high temperature oxidation of zirconium-alloy. Surf. Coat. Technol., 316, 30–38. http://dx.doi.org/10.1016/j.surfcoat.2017.03.018.10.1016/j.surfcoat.2017.03.018
Open DOI Search in Google Scholar Back to article
22. Kaiser, A., Lobert, M., & Telle, R. (2008). Thermal stability of zircon (ZrSiO₄). J. Eur. Ceram. Soc., 28, 2199–2211. DOI: 10.1016/j.jeurceramsoc.2007.12.040.10.1016/j.jeurceramsoc.2007.12.040
Open DOI Search in Google Scholar Back to article
23. Lavrenko, V. A., Shemet, V. Zh., & Goncharuk, A. V. (1985). Studies on mechanism of high-temperature oxidation of molybdenium, tungsten and zirconium disilicides by differential thermal analysis. Thermochim. Acta, 93, 501–504. https://doi.org/10.1016/0040-6031(85)85126-1.10.1016/0040-6031(85)85126-1
Open DOI Search in Google Scholar Back to article
24. Ueno, S., Ogji, T., & Lin, H. T. (2007). Corrosion and recession behavior of zircon in water vapor environment at high temperature. Corros. Sci., 49(3), 1162–1171. https://doi.org/10.1016/j.corsci.2006.08.013.10.1016/j.corsci.2006.08.013
Open DOI Search in Google Scholar Back to article

Studies on magnetron-sputtered zirconium-silicide coatings deposited on zirconium alloy for the enhancement of their high-temperature oxidation resistance

Abstract

Paradigm

My account