Evaluating the Mechanical Properties and Carbonation Resistance of High Slag Cement Concretes
By: Mika Tulimaa, Anna Koivu, Hassan Ahmed, Sini Ruokonen and Jouni Punkki
References
- Gartner E: “Are There Any Practical Alternatives to the Manufacture of Portland Cement Clinker?”. Journal of the Chinese Ceramic Society, Vol. 40, No. 1, 2012, pp. 61-68.
- Friedlingstein P, O’Sullivan M, Jones M W, Andrew R M, Gregor L, Hauck J & Al E: “Global Carbon Budget 2022”. Earth System Science Data, Vol. 14, 2022, pp. 4811-4900.
- Li C, Gong X, Cui S, Wang Z, Zheng Y & Chi B: “CO2 Emissions due to Cement Manufacture”. Materials Science Forum, Vol. 685, 2011, pp. 181-187.
- Huntzinger D N & Eatmon T D: “A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies”. Journal of Cleaner Production, Vol. 17, No. 7, 2009, pp. 668-675.
- Finnsementti: “Environmental Product Declaration, in accordance with ISO 14025 and EN 15804:2012+A2:2019 for: Pika-cement, CEM I 52,5 R Parainen”. Finland, 2021.
- Dunant C F, Joseph S, Parajapati R & Allwood J M: “Electric recycling of Portland cement at scale”. Nature, Vol. 629, 2024, pp. 1055-1061.
- Mertens G, Snellings R, Van Balen K, Bicer-Simsir B, Verlooy P & Elsen J: “Pozzolanic reactions of common natural zeolites with lime and parameters affecting their reactivity”. Cement and Concrete Research, Vol. 3, 2009, pp. 233-240.
- Dai J, Wang Q, Xie C, Xue Y, Duan Y & Cui X: “The Effect of Fineness on the Hydration Activity Index of Ground Granulated Blast Furnace Slag”. Materials, Vol. 12, No. 18, 2019.
- Osmanović Z, Haračić N & Zelić J: “Properties of blast furnace cements (CEMIII/A, B, C) based on Portland cement clinker, blast furnace slag and cement kiln dusts”. Cement and Concrete Composites, 2018.
- Siddique R & I K M: Supplementary Cementing Materials. Springer-Verlag, Berlin, Germany, 2011.
- Finnish Standards Association: “SFS-EN 197-1: Cement. Part 1: Composition, specifications and conformity criteria for common cements”. Finland, 2012.
- Kim T H, Tae S H, Chae C U & Choi W Y: “The Environmental Impact and Cost Analysis of Concrete Mixing Blast Furnace Slag Containing Titanium Gypsum and Sludge in South Korea”. Sustainability, Vol. 8, No. 6, 2016.
- Tushar Q, Bhuiyan M A, Abunada Z, Lemckert C & Giustozzi F: “Carbon Footprint and Uncertainties of Geopolymer Concrete Production: A Comprehensive Life Cycle Assessment (LCA)”. Journal of Carbon Research, Vol. 11, No. 3, 2025.
- Finnsementti Oy: “Environmental Product Declaration In accordance with ISO 14025 and EN 15804:2012+A2:2019 for: KJ 400 GGBS”. Finland, 2022.
- Vejmelkova E, Pavlikova M, Kersner Z, Rovnanikova P & Al E: “High performance concrete containing lower slag amount: a complex view of mechanical and durability properties”. Construction and Building Materials, 2009, pp. 2237-2245.
- Binci H, Temiz H & Koe M: “The effect of fineness on the properties of the blended cements incorporating ground granulated blast furnace slag and ground basaltic pumice”. Construction and Building Materials, Vol. 21, No. 5, 2007, pp. 1122-1128.
- SSAB: “Transforming the future of steel – Annual report 2025”, 2026, pp. 7-13.
- Thawia A M, Elgendy G M & Amin M: “Mechanical properties of affordable and sustainable ultra-high-performance concrete”. Case Studies in Construction Materials, Vol. 16, 2022.
- Teng S, Lim T Y D & Divsholi B S: “Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag”. Construction and Building Materials, Vol. 40, 2013, pp. 875-881.
- Chidiac S & Panesar D: “Evolution of mechanical properties of concrete containing ground granulated blast furnace slag and effects on the scaling resistance test at 28 days”. Cement & Concrete Composites, Vol. 30, 2008, pp. 63-71.
- Tsakiridis P, Papadimitriou G, Tsivilis S & Koroneos C: “Utilization of steel slag for Portland cement clinker production”. Journal of Hazardous Materials, Vol. 152, No. 2, 2008, pp. 805-811.
- Qiang W, Peiyu Y, Jianwei Y & Bo Z: “Influence of steel slag on mechanical properties and durability of concrete”. Construction and Building Materials, Vol. 47, 2013, pp. 1414-1420.
- Han-Seung L & Wang X-Y: “Evaluation of compressive strength development and carbonation depth of high volume slag-blended concrete”. Construction and Building Materials, Vol. 124, 2016, pp. 45-54.
- Iqbal A, Ojala T, Al-Neshawy F & Punkki J: “Effect of Slag Content and Carbonation/Ageing on Freeze-Thaw Resistance of Concrete”. Nordic Concrete Research, 2024, pp. 47-67.
- Rivera A O, Malaga K & Mueller U: “Accelerated Carbonation of Binders Containing SCM at High CO2 Concentration”. Nordic Concrete Research, Vol. 69, No. 2, 2023, pp. 1-10.
- Helsing E & Utgenannt P: “Salt-Frost Scaling of Concrete with Slag and Fly Ash - Influence of Carbonation and Prolonged Conditioning on Test Results”. Nordic Concrete Research, Vol. 63, No. 2, 2020, pp. 89-108.
- Finnish Standards Association: “SFS-EN 12350-2. Testing Fresh Concrete. Part 2”. Finland, 2019.
- Finnish Standards Association: “SFS-EN 12350-7. Testing Fresh Concrete. Part 7: Air Content. Pressure Methods”. Finland, 2019.
- Finnish Standards Association: “SFS-EN 12390-3. Testing hardened concrete. Part 3: Compressive strength of test specimens”. Finland, 2019.
- Finnish Standards Association: “Betoni. Vetolujuus” (“Concrete. Tensile Strength”). Finland, 1988. (In Finnish).
- Finnish Standards Association: “SFS-EN 1542: Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pulloff”. Finland, 1999.
- Finnish Standards Association: “SFS-EN 12390-13. Testing Hardened Concrete. Part 13: Determination of Secant Modulus of Elasticity in Compression”. Finland, 2021.
- Finnish Standards Association: “SFS-EN 13295: Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation”. Finland, 2004.
- Roy S, Poh K & Northwood D: “Durability of concrete: accelerated carbonation and weathering studies”. Building and Environment, 1999, pp. 597-606.
- Lee H-S, Wang X-Y, Zhang L-N & Koh K-T: “Analysis of the Optimum Usage of Slag for the Compressive Strength of Concrete”. Materials, Vol. 8, 2015, pp. 1213-1229.
- Escalante-Garcia J & Sharp J: “The microstructure and mechanical properties of blended cements hydrated at various temperatures”. Cement and Concrete Research, Vol. 31, 2001, pp. 695-702.
- Moro F & Cuchet S: “Carbonation Resistance: Accelerated Determination and Conformity Assessment Based on Swiss Standard Method”. Proceedings, THBB Akademi, Turkey, 2020.
- Zhao J, Shumuye E D, Wang Z & Bezabih G A: “Performance of GGBS Cement Concrete under Natural Carbonation and Accelerated Carbonation Exposure”. Journal of Engineering, 2021.
- Jin-Keun K, Chin-Yong K, Seong-Tae Yi, Lee Y: “Effect of carbonation on the rebound number and compressive strength of concrete”. Cement & Concrete Composites, Vol. 31, 2009, pp 139-144.
Language: English
Page range: 73 - 92
Submitted on: Feb 25, 2026
Accepted on: Jun 16, 2026
Published on: Jun 30, 2026
Published by: Nordic Concrete Federation
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2026 Mika Tulimaa, Anna Koivu, Hassan Ahmed, Sini Ruokonen, Jouni Punkki, published by Nordic Concrete Federation
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.