References
- Wimala M, Fujiki A & Kawai K: “Environmental Impact of Waste Concrete Treatment in Precast Concrete Production”. Proceedings, Annual Conference Japan Concrete Institute, Japan, 2011.
- Walberg D: “Solid and Timber Construction in Residential Buildings”. Mauerwerk, 2016, pp. 16-31.
- Zheng L, Wu H, Zhang H, Duan H, Wang J, Jiang W, Dong B, Liu G, Zuo J & Song Q: “Characterizing the Generation and Flows of Construction and Demolition Waste in China”. Construction and Building Materials, 2017, pp. 405-413.
- Ma M, Tam V W, Le K N & Li W: “Challenges in Current Construction and Demolition Waste Recycling: A China Study”. Waste Management, 2020, pp. 610-625.
- Sadagopan M, Malaga K, Lundin M & Nagy A: “Effects of Slag Addition and Mechanical Pre-Processing on the Properties of Recycled Concrete in Terms of Compressive Strength and Workability”. Nordic Concrete Research, 2021, pp. 11-29.
- LCA Consulting Oy: “Carbon footprint of Betoroc crushed concrete in infrastructure construction”. Report version 1.1, July, 2021.
- Helsing E, Brander L & Martinsson P: “Durability of Concrete with Recycled Aggregate”. Nordic Concrete Research, 2024, pp. 69-89.
- Flower D J M & Sanjayan J G: “Green House Gas Emissions Due to Concrete Manufacture”. The International Journal of Life Cycle Assessment, 2007, pp. 282-288.
- Wang B, Yan L, Fu Q & Kasal B: “A Comprehensive Review on Recycled Aggregate and Recycled Aggregate Concrete”. Resources, Conservation & Recycling, 2021.
- Kumutha R & Vijai K: “Strength of Concrete Incorporating Aggregates Recycled from Demolition Waste”. ARPN Journal of Engineering and Applied Sciences, 2010.
- Liu K, Fu K, Sang Y, Yang Y, Zou C, Xie T & Zhao X: “Frost Resistance of Recycled Aggregate Concrete: A Critical Review”. Journal of Building Engineering, Vol. 90, 2024.
- Maruyama I, Sogo M, Sogabe T & Sato R: “Flexural Properties of Reinforced Recycled Concrete Beams”. Proceedings, Conference on the Use of Recycled Materials in Buildings and Structures, Barcelona, Spain, 2004.
- Kheder G & Al-Windawi S: “Variation in Mechanical Properties of Natural and Recycled Aggregate Concrete as Related to the Strength of Their Binding Mortar”. Materials and Structures, 2005, pp. 701-709.
- Gómez-Soberón J M: “Relationship Between Gas Adsorption and the Shrinkage and Creep of Recycled Aggregate Concrete”. Cement Concrete and Aggregates, 2003.
- Doming-Cabo A, Lázaro C, López-Gayarre F, Serrano-López M, Serna P & Castaño-Tabares J: “Creep and Shrinkage of Recycled Aggregate Concrete”. Construction and Building Materials, 2009, pp. 2545-2553.
- Kou S. C., Poon C. S. and Chan D.: “Influence of fly ash as a cement addition on the hardened properties of recycled aggregate concrete”. Materials and Structures, 2008, Vol. 41, pp. 1191-1201.
- Kou S. C., Poon C. S., Agrela F.: “Comparisons of natural and recycled aggregate concretes prepared with the addition of different mineral admixtures”. Cement & Concrete Composites, 2011, Vol. 33, pp. 788-795.
- Padmini, A.K., Ramamurthy, K., Mathews, M.S.: “Influence of parent concrete on the properties of recycled aggregate concrete”. Construction and Building Materials, 2009, Vol. 2, pp. 829-836.
- Sadagopan M, Malaga K, and Nagy A: “Improving recycled aggregate quality by mechanical pre-processing”. Materials, 2020.
- Finnish Standards Association: “SFS-EN 206. Concrete. Specification, Performance, Production and Conformity”, Helsinki, Finland, 2014. 93 pp.
- Finnish Standards Association: “SFS-EN 12350-2. Testing Fresh Concrete. Part 2: Slump Test”, Helsinki, Finland, 2019. 12 pp.
- Finnish Standards Association: “SFS-EN 12350-7. Testing Fresh Concrete. Part 7: Air Content. Pressure Methods”, Helsinki, Finland, 2019. 5 pp.
- Finnish Standards Association: “SFS-EN 12390-3. Testing hardened concrete. Part 3: Compressive strength of test specimens”, Helsinki, Finland, 2019. 20 pp.
- Finnish Standards Association: “SFS 5445. Betoni. Vetolujuus (Concrete. Tensile Strength)”, 1988. 2 pp. (In Finnish)
- Finnish Standards Association: “SFS-EN 12390-5. Flexural Strength of Test Specimens”, 2019. 20 pp.
- Finnish Standards Association: “SFS-EN 12390-13. Testing Hardened Concrete. Part 13: Determination of Secant Modulus of Elasticity in Compression”, 2021. 14 pp.
- Finnish Standards Association: “SFS-EN 12390-17. Testing Hardened Concrete. Part 17: Determination of Creep of Concrete in Compression”, 2019. 16 pp.
- Finnish Standards Association: “SFS-EN 12390-16. Testing Hardened Concrete. Part 16: Determination of the shrinkage of concrete”, 2019. 13 pp.
- European Committee for Standardization: “CEN/TR 15177. Testing the Freeze-Thaw Resistance of Concrete. Internal Structural Damage”, 2006. 34 pp.