References
- Lantsoght E O L, van der Veen C, & Walraven J C: “Shear in One-Way Slabs under Concentrated Load Close to Support”. ACI Structural Journal, Vol. 110, No. 2, 2013, pp. 275-284.
- Vaz Rodrigues R: “Shear Strength of Reinforced Concrete Bridge Deck Slabs” (PhD Thesis), École Polytechnique Fédérale de Lausanne. Lausanne, Switzerland, 2007.
- Veganzones Muñoz J J, Pacoste C, Pettersson L & Karoumi R: “Influence of Edge Beam on Behavior of Bridge Overhangs”. ACI Structural Journal, Vol 115, No. 4, 2018, pp. 957-970.
- Henze L: “Shear behavior of reinforced concrete bridge deck slabs” (“Querkrafttragverhalten von Stahlbeton-Fahrbahnplatten”). PhD Thesis, TUHH Hamburg University of Technology]. Hamburg, Germany, 2019. (In German).
- Lantsoght E O L., van der Veen C, De Boer A, & Walraven J C: “Influence of Width on Shear Capacity of Reinforced Concrete Members”. ACI Structural Journal, Vol. 111, No. 6, 2014, pp. 1441-1450.
- Reissen K & Hegger J: “Experimental Study on the Shear Capacity of Concrete Slabs”. Proceedings, IABSE-IASS Symposium, London, 2011.
- Reissen K & Hegger J: “Shear Capacity of Reinforced Concrete Slabs under Concentrated Loads”. Proceedings, 18th IABSE Congress Innovative Infrastructures – Towards Human Urbanism, Seoul, 2012, pp. 966-973.
- Reissen K & Hegger J: “Experimental investigations on the shear-bearing behaviour of bridge deck cantilever slabs under wheel loads” (“Experimentelle Untersuchungen zum Querkrafttragverhalten von auskragenden Fahrbahnplatten unter Radlasten”). Beton- und Stahlbetonbau, Vol. 108, No. 3, 2013, pp. 315-324. (In German).
- Vida R, Halvonik J & Majtánová L: “Experimental Verification of Concentrated Load Transverse Distribution in Shear”. Solid State Phenomena, Vol. 272, 2018, pp. 250-255.
- CEN: “Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings. EN 1992-1-1”. 2005.
- Veganzones Muñoz J J, Pacoste, C & Karoumi R: “Width and Edge Beam Effects on the Ultimate Behaviour of RC Bridge Overhangs”. Nordic Concrete Research, Vol. 61, No. 2, 2019, pp. 131-152.
- CEB-FIP: “fib Model Code for Concrete Structures 2010”. Lausanne, Switzerland, 2013.
- DIN: “Design and Construction of Reinforced and Presstressed Concrete Structures” (“1045-1 Bemessung und Konstruktion von Stahlbeton- und Spannbetonbauteilen”). 2008. (In German).
- Swedish Transport Administration (Trafikverket): “Calculation of load capacity of bridges - Recommendations” (“TDOK 2013:0273 Bärighetsberäkning av broar - Råd”). Borlänge, Sweden, 2019. (In Swedish).
- Hedman O & Losberg A: “Shear resistance of thin concrete slabs subjected to moving concentrated loads” (“Skjuvhållfasthet hos tunna betongplattor belastade med rörliga punktlaster”). Preliminary report to the Road Administration. 1976. (In Swedish).
- Vaz Rodrigues R, Fernández Ruiz M & Muttoni A: Shear strength of R/C bridge cantilever slabs. Engineering Structures, Vol. 30, 2008, pp. 3024-3033.
- Natário F, Fernández Ruiz M & Muttoni A: “Shear strength of RC slabs under concentrated loads near clamped linear supports”. Engineering Structures, Vol. 76, 2014, pp. 10-23.
- Natário F, Fernández Ruiz, M & Muttoni A: “Experimental investigation on fatigue of concrete cantilever bridge deck slabs subjected to concentrated loads”. Engineering Structures, Vol. 89, 2015, pp. 191-203.
- Rombach, G & Latte S: “Shear resistance of bridge decks without shear reinforcement”. Proceedings, fib Symp.: Tailor Made Concrete Structures, Amsterdam 2008, pp. 519-525.
- Rombach, G & Henze L: “Shear Capacity of Concrete Slabs Without Shear Reinforcement Under Concentrated Loads Close to Support”. Proceedings, fib High Tech Concrete: Where Technology and Engineering Meet, Maastricht, 2018, pp. 676-683.
- Reissen K & Hegger J: “Shear load bearing capacity of road bridge slabs under wheel loads” (“Querkrafttragfähigkeit von Fahrbahnplatten unter Radlasten”). Proceedings, Brückenkolloquium Beurteilung, Ertüchtigung und Instandsetzung von Brücken : 2 (Bridge assessment, upgrading and repair), Esslingen, 2016, pp. 111-126. (In German).
- Lee J & Fenves G L: “Plastic-Damage Model for Cyclic Loading of Concrete Structures”. Journal of Engineering Mechanics, Vol. 124, No. 8, 1998, pp. 892-900.
- Lubliner J, Oliver J, Oller S & Onate E: “A plastic-damage model for concrete. International Journal of Solids and Structures, Vol. 25, No. 3, 1989, pp. 299-329.
- Cornelissen H, Hordijk D & Reinhardt H: “Experimental determination of crack softening characteristics of normal weight and lightweight concrete”. Heron, Vol. 31, No. 2, 1986, pp. 45-56.
- Malm R: “Guidelines for FE-analyses of concrete dams”. Report 2016:270, Energiforsk, Stockholm, Sweden, 2016.
- Veganzones Muñoz J J: “Bridge Overhang Slabs with Edge Beams: LCCA and Structural Analysis for the Development of New Concepts”. PhD Thesis, Dept. of Civil & Architectural Engineering, KTH Royal Institute of Technology. Stockholm, Sweden, 2020.
- Broo H, Lundgren K & Plos M: “A guide to non-linear finite element modelling of shear and torsion in concrete bridges”. Report No. 2008:18, Chalmers University of Technology, Gothenburg, Sweden, 2008.
- Pacoste C, Plos M & Johansson M: “Recommendations for finite element analysis for the design of reinforced concrete slabs”, Technical report 144. KTH Royal Institute of Technology, Stockholm, Sweden, 2012.
- ACI: “Code 318-19: Building Code Requirements for Structural Concrete and Commentary”. American Concrete Institute, Farmington Hills, USA, 2019.