References
- 1. Standard: EN 206:2013, Concrete – specification, performance, production and conformity.
- 2. Ginouse N & Jolin M: “Investigation of spray pattern in shotcrete applications”. Construction and Building Materials, Vol. 93, 2015, pp. 966-972.
- 3. Banthia N: “Advances in sprayed concrete (shotcrete)”, Chapter 12, “Developments in the Formulation and Reinforcement of Concrete” (edited by Mindess S), Woodhead Publishing Limited, Cambridge, UK, 2019, pp. 289-306.
- 4. Holter KG: “Properties of waterproof sprayed concrete tunnel linings”. 197, PhD thesis, Norwegian University of Science and Technology, Department of Geology and Mineral Resources Engineering, Trondheim, Norway, 2015, 167 pp.
- 5. Trussell N & Jacobsen S: “Review of Sprayability of Wet Sprayed Concrete”. Nordic Concrete Research Journal, Vol. 63, Issue 2, 2020, pp. 21-41.
- 6. Kauffman J, Frech K, Schuetz P & Münch: “Rebound and orientation of fibers in wet sprayed concrete applications”. Construction and Building Materials, Vol. 49, 2013, pp. 15-22.
- 7. Powers T C & Brownyard T L: “Studies of the hardened paste by means of specific volume measurements”. Journal of the American Concrete Institute, pp. 669-712 (1947).
- 8. Scrivener K, Muller A, Zalzale M, Do Q & McDonald P: “New insights on mechanics controlling kinetics and implications for pore structure”. Proceedings, Understanding the fundamental properties of concrete, Trondheim, Norway, 2013.
- 9. Sellevold E, Bager D, Klitgaard Jensen E & Knudsen T: “Condensed silica fume in concrete”. Report BML 82.610, Division of Building Materials, Norwegian Institute of Technology, 1982.
- 10. Muller A, Scrivener K, Gajewicz A & McDonald P: “Densification of C-S-H Measured by 1H NMR Relaxometry”. Journal of Physical Chemistry, Vol. 117, No.1, 2013, pp. 403-412.
- 11. Nadelman E & Kurtis K: “Application of Powers’ model to modern portland and portland limestone cement pastes”. Journal of the American Ceramic Society, Vol. 100, Issue 9, 2017, pp. 4219–4231.
- 12. Salvador R, Cavalaro S, Monte R & de Figueiredo A: “Relation between chemical processes and mechanical properties of sprayed cementitious matrices containing accelerators”. Cement and Concrete Composites, Vol. 79, 2017, pp. 117-132.
- 13. Publication no. 7: “Sprayed Concrete for Rock Support”. Norwegian Concrete Association, Oslo, Norway, 2011.
- 14. Maltese C, Pistolesi C, Bravo A, Cella F, Cerulli T, Salvioni D & Dal Negro E: “Effects of alkali metal hydroxides on alkali-free accelerators”. Advances in Cement Research, Volume 23 Issue 6, 2011, pp. 277-288.
- 15. Myrdal R, Accelerating admixtures for concrete – state of the art, SINTEF report, Trondheim, Norway, 2007.
- 16. Salvador R, Cavalaro S, Cano M, de Figueiredo A: “Influence of spraying on the early hydration of accelerated cement pastes”. Cement and Concrete Research, Volume 88, 2016, pp. 7-19.
- 17. Taylor H: Cement Chemistry, 2nd edition, Thomas Telford, London, UK, 1997.
- 18. Sellevold E & Farstad T: “The PF-method – a simple way to estimate the w/c-ratio and air content of hardened concrete”. Proceedings, Construction materials: performance, innovations and structural implications, Vancouver, Canada, 2005, 10 pp.
- 19. Trussell N, Cepuritis R & Jacobsen S: “Effect of set accelerator on properties of wet sprayed concrete”. Nordic Concrete Research Journal, Vol. 66, Issue 1, 2022, pp. 19-39.
- 20. Hagelia P: “Deterioration mechanisms and durability of sprayed concrete for rock support in tunnels”. PhD thesis, Delft University of Technology, Delft, Netherlands, 2011, 320 pp.
- 21. Galan I, Baldermann A, Kusterle W, Dietzel M & Mittermayr F: “Durability of shotcrete for underground support – Review and update”. Construction & Building Materials, Vol. 202, 2019, pp. 465-493.
- 22. Glasser F, Marchand J & Samson E: “Durability of concrete — Degradation phenomena involving detrimental chemical reactions”. Cement and Concrete Research, Vol. 38, 2008, pp. 226-246.
- 23. Long G, Xie Y, Deng D & Li X: “Deterioration of concrete in railway tunnel suffering from sulfate attack”. Journal of Central South University, Vol. 18, 2011, pp. 881-888.
- 24. Lee S, Kim D & Jung H: “Sulfate Attack of Cement Matrix Containing Inorganic Alkali-free Accelerator”. KSCE Journal of Civil Engineering, Vol. 13, Issue 1, 2009, pp. 49-54.
- 25. Manquehual C, Jakobsen P, Holter KG, de Weerdt K, Danner T & Bruland A: “Comparison of the condition of steel fiber-reinforced shotcrete with water-glass and alkali-free activators after more than 20 years of service in a subsea road tunnel”. Construction and Building Materials, Vol. 328, 2022, 127090.
- 26. Master Builders Solutions, SA 168 data sheet.
- 27. Standard: EN 12350-1:2019, Testing fresh concrete – part 1: sampling and common apparatus.
- 28. Standard: EN 12350-2:2019, Testing fresh concrete – part 2: slump test.
- 29. Standard: EN 12350-6:2019, Testing fresh concrete – part 6: density.
- 30. Standard: EN 12350-7:2019, Testing fresh concrete – part 7: air content – pressure methods.
- 31. Punkki J & Sellevold E: “Capillary suction in concrete: effects of drying procedure”. Nordic Concrete Research, Vol. 15, 1994, pp. 59-74.
- 32. Smeplass S: “Capillary absorption as a quality criterion”. SINTEF report, 1998, Trondheim, Norway.
- 33. Maltese C, Pistolesi C, Bravo A, Cella F, Cerulli T & Salvioni D: “A case history: Effect of moisture on the setting behaviour of a Portland cement reacting with an alkali-free accelerator”. Cement and Concrete Research, Vol. 37, 2007, pp. 856-865.
- 34. Salvador R, Cavalaro S, Cincotto M & de Figueiredo A: “Parameters controlling early age hydration of cement pastes containing accelerators for sprayed concrete”. Cement and Concrete Research, Vol. 89, 2016, pp. 230-248.
- 35. Salvador R, Cavalaro S, Cano M & de Figueiredo A: “Influence of spraying on the early hydration of accelerated cement pastes”. Cement and Concrete Research, Vol. 88, 2016, pp. 7-19.