References
- 1. Jolin M, Melo F & Bissonnette B: “Concrete durability applied to sprayed concrete mixture design”. Proceedings, 7th International Symposium on Sprayed Concrete, Sandefjord, Norway, June 2014, pp. 233-244.
- 2. Jolin M, Burns D, Bissonnette B, Gagnon F & Bolduc L-S: “Understanding the pumpability of concrete”. Proceedings, Shotcrete for underground support XI, Davos, Switzerland, June 2009.
- 3. Banthia N, Trottier J-F & Beaupre D: “Steel fibre reinforced wet-mix shotcrete: comparisons with cast concrete”. Journal of Materials in Civil Engineering, Vol. 6, No. 3, 1994, pp. 430-437.10.1061/(ASCE)0899-1561(1994)6:3(430)
- 4. Beaupré N: “Rheology of high performance shotcrete”. PhD thesis, University of British Columbia, Department of Civil Engineering, Vancouver, Canada, 1994, 265 pp.
- 5. Mørtsell E: “The effect of the constituent materials on the rheology of fresh concrete”. PhD thesis, Norwegian University of Science and Technology, Department of Structural Engineering, Trondheim, Norway, 1996, 301 pp. (In Norwegian).
- 6. Banthia N: “Sprayed concrete (shotcrete)”, Chapter 4, “Developments in the Formulation and Reinforcement of Concrete” (edited by Mindess S), Woodhead Publishing Limited, Cambridge, UK, 2008, pp. 98-113.10.1533/9781845694685.98
- 7. Myren S, Hagelia P & Bjøntegaard Ø: “The ban of polymer fibre in FRSC in Norwegian road tunnels”. Proceedings, 8th International Symposium on Sprayed Concrete, Trondheim, Norway, June 2018, pp. 257-260.
- 8. Standard: EN 206, “Concrete – Specification, performance, production and conformity”, 2013.
- 9. “Bukte lavkarbon sprøyte-betong på bybaneprosjekt” (Use of low-carbon sprayed concrete on an urban railway project). Byggeindustrien magazine, NR. 19 – 2019, p 96. (In Norwegian).
- 10. Tattersall & Banfill: “The Rheology of Fresh Concrete”, Pitman Books Ltd, London, UK, 1983.
- 11. Kaplan D, de Larrard F & Sedran T: “Avoidance of Blockages in Concrete Pumping Process”. ACI Materials Journal, May-June 2005, 102-M21, pp. 183-191.10.14359/14446
- 12. Bartos P, Sonebi M & Tamimi A K: “Workability and rheology of fresh concrete: compendium of tests”, Report of RILEM technical committee TC145 WSM, RILEM Publications, 2002.
- 13. Standard: EN 12350-5, “Testing of fresh concrete – Part 5: Flow table test”, 2019.
- 14. Standard: EN 12350-2, “Testing of fresh concrete – Part 2: Slump test”, 2019.
- 15. Myrdal R: “Accelerating admixtures for concrete – state of the art”, SINTEF report, Trondheim, Norway, 2007.
- 16. Choi M, Roussel N, Kim Y & Kim J: “Lubrication layer properties during concrete pumping”. Cement and Concrete Research, Vol. 45, 2013, pp. 69-78.10.1016/j.cemconres.2012.11.001
- 17. Ginouse N & Jolin M: “Investigation of spray pattern in shotcrete applications”. Construction and Building Materials, Vol. 93, 2015, pp. 966-972.10.1016/j.conbuildmat.2015.05.061
- 18. Ginouse N, Jolin M & Bissonnette B: “Effect of equipment on spray velocity distribution in shotcrete applications”. Construction and Building Materials, Vol. 70, 2014, pp. 362-369.10.1016/j.conbuildmat.2014.07.116
- 19. Ginouse N & Jolin M: “Characterization of placement phenomenon in wet sprayed concrete”. Proceedings, 7th International Symposium on Sprayed Concrete, Sandefjord, Norway, June 2014, pp. 173-183.
- 20. Opsahl O A: “A study of a wet-process shotcreting method – Volume I”. Report BML 85.101, PhD thesis, Norwegian Institute of Technology, University of Trondheim, Division of Building Materials, Trondheim, Norway, 226 pp.
- 21. Reinhold M & Wetzig V: “Influence of air-flow at nozzle-distance on sprayed concrete properties”. Proceedings, 7th International Symposium on Sprayed Concrete, Sandefjord, Norway, June 2014, pp. 320-329.
- 22. Publication no. 7: “Sprayed Concrete for Rock Support”. Norwegian Concrete Association, Oslo, Norway, 2011.
- 23. Kauffman J, Frech K, Schuetz P & Münch: “Rebound and orientation of fibers in wet sprayed concrete applications”. Construction and Building Materials, Vol. 49, 2013, pp. 15-22.10.1016/j.conbuildmat.2013.07.051
- 24. Austin S, Goodier C & Robins P: “Low-volume wet-process sprayed concrete: pumping and spraying”. Materials and Structures, Vol- 38, 2005, pp. 229-237.10.1007/BF02479348
- 25. Standard: EN 14487-1, “Sprayed concrete – Part 1: Definitions, specifications and conformity”, 2012.
- 26. Neville AM: “Properties of Concrete”, 4th Edition, Longman Group Limited, Harlow, England, 1995.
- 27. Taylor H: “Cement Chemistry”, 2nd Edition, Thomas Telford Publishing, London, UK, 459 pp.
- 28. Salvador R, Cavalaro S, Segura I, Figueiredo A & Pérez J: “Early age hydration of cement pastes with alkaline and alkali-free accelerators for sprayed concrete”. Construction and Building Materials, Vol. 111, 2016, pp. 386–398.10.1016/j.conbuildmat.2016.02.101
- 29. Beck T: “Effect of fresh concrete temperature and temperature in surroundings on compressive strength development in sprayed concrete”. Proceedings, 7th International Symposium on Sprayed Concrete, Sandefjord, Norway, June 2014, pp. 50-55.
- 30. Cepuritis R: “Norbetong standard test method: determination of setting time for sprayed concrete containing accelerating admixture”, unpublished, 2009.
- 31. Standard: EN 196-1, “Methods of testing cement – Determination of strength”, 2016.
- 32. Shrader E & Kaden R: “Durability of shotcrete”. Proceedings, Concrete Durability International Conference, Volume 2, American Concrete Institute, Detroit, USA, 1987, pp. 1071-1101.
- 33. Holter: “Properties of waterproof sprayed concrete tunnel linings”. 197, PhD thesis, Norwegian University of Science and Technology, Department of Geology and Mineral Resources Engineering, Trondheim, Norway, 2015, 167 pp.
- 34. Bryne L E, Ansell A & Holmgren J: “Investigation of restrained shrinkage cracking in partially fixed shotcrete linings”. Tunnelling and Underground Space Technology, 42, 2014, pp. 136-143.10.1016/j.tust.2014.02.011
- 35. Menu B, Jolin M, Bissonnette B & Molez L: “Évaluation de la sensibilté à la fissuration des bétons projetés au jeune âge” (Assessment of the sensitivity to cracking of sprayed concrete at a young age). Proceedings, Conférence International Francophone NoMaD 2018.
- 36. Punkki J & Sellevold E J: “Capillary suction in concrete: effects of drying procedure”. Nordic Concrete Research, Vol. 15, 1994, pp. 59-74.
- 37. Sellevold E J & Farstad T: “The PF-method – a simple way to estimate the w/c-ratio and air content of hardened concrete”. Proceedings, Construction materials: performance, innovations and structural implications, Vancouver, Canada, 2005, 10 pp.
- 38. Fonseca P C & Scherer G W: “An image analysis procedure to quantify the air void system of mortar and concrete”. Materials and Structures, Vol. 48, 2015, pp. 3087-3098.10.1617/s11527-014-0381-9
- 39. ASTM Standard C457.C457M–11: Standard test method microscopical determination of parameters of the air-void system in hardened concrete, ASTM International, West Conshohocken, PA, 2003.
- 40. Garboczi E J, Snyder K A, Douglas J F & Thorpe M F: “Geometrical percolation threshold of overlapping ellipsoids”. Physical Review E, Vol. 52, No. 1, 1995, pp. 819-828.10.1103/PhysRevE.52.819
- 41. Zhao Y, Wang X, Jiang J & Zhou L: “Characterisation of interconnectivity, size distribution and uniformity of air voids in porous asphalt concrete using X-ray CT scanning images”. Construction and Building Materials, Vol. 213, 2019, pp. 182-193.10.1016/j.conbuildmat.2019.04.056
- 42. Hodder K J, Izadi H, McDonald A G & Gerlich AP: “Fabrication of aluminium-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing”. Materials Science & Engineering, A 556, 2012, pp. 114-121.10.1016/j.msea.2012.06.066
- 43. Hagelia P: “Durability of sprayed concrete for rock support – a tale from the tunnels. Proceedings”. 8th International Symposium on Sprayed Concrete, Trondheim, Norway, June 2018, pp. 172-187.