References
- 1. Eligehausen R, Mallée R & Silva J F: “Anchorage in Concrete Construction”. Ernst & Sohn, Berlin, Germany, 2006, 378 pp.
- 2. ACI Committee 349: “Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-85)”. American Concrete Institute, Detroit, USA, 1985.
- 3. Fuchs W, Eligehausen R & Breen J E: “Concrete Capacity Design (CCD) Approach for Fastening to Concrete”. ACI Structural Journal, Vol. 92, No. 1, 1995, pp. 73–94.
- 4. CEB: “Design of Fastenings in Concrete, Comité Euro-International du Béton”. Thomas Telford, Lausanne, Switzerland, 1997, 92 pp.
- 5. CEN/TS 1992-4: “CEN Technical Specification (TS): Design of Fastenings for Use in Concrete, Final Draft”. European Organization for Standardization (CEN), Brussels, Belgium, 2009, 166 pp.
- 6. fib Bulletin 58. “Design of Anchorages in concrete – Guide to good practice”. International Federation for Structural Concrete, Lausanne, Switzerland, 2011, 280 pp.
- 7. ACI 349: “Code Requirements for Nuclear Safety-Related Concrete Structures, Appendix D”. American Concrete Institute, Farmington Hills, MI, USA, 2006.
- 8. ACI 318: “Building Code Requirements for Structural Concrete and Commentary”. American Concrete Institute, Farmington Hills, MI, USA, 2014, 524 pp.
- 9. Ožbolt J, Eligehausen R, Periškić G & Mayer U: “3D FE Analysis of Anchor Bolts with Large Embedment Depths,” Engineering Fracture Mechanics, Vol. 74, Nos. 1-2, 2007, pp.168-178.
- 10. Eligehausen R, Bouška P, Červenka V & Pukl, R: “Size Effect of the Concrete Cone Failure Load of Anchor Bolts”. Proceedings, 1st International Conference of Fracture Mechanics of Concrete Structures (FRAMCOS 1), Z.P. Bazant, ed., 1992, pp. 517–525.
- 11. Nilsson M, Ohlsson U & Elfgren L: “Effects of Surface Reinforcement on Bearing Capacity of Concrete with Anchor Bolts.” Nordic Concrete Research, No. 44, 2011, pp. 161–174.
- 12. Zhao G: “Tragverhalten von randfernen Kopfbolzenverankerungen bei Betonbruch”. Ph.D. Dissertation, University of Stuttgart, Stuttgart, Germany, 1993, 204 pp. (In German).
- 13. Lee, N. H., Kim, K. S., Bang, C. J., & Park, K. R., (2007). “Tensile-headed anchors with large diameter and deep embedment in concrete”. ACI Structural Journal, Vol. 104, No. 4, 2007, pp. 479-486.
- 14. Ožbolt J, Li Y & Kožar I: “Microplane Model for Concrete with Relaxed Kinematic Constraint,” International Journal of Solids and Structures, Vol. 38, No. 16, 2001, pp. 2683-2711.10.1016/S0020-7683(00)00177-3
- 15. Bažant Z P & Oh B H: “Crack Band Theory for Fracture of Concrete,” Materials and Structures (RILEM), Vol. 16, No. 3, 1983, pp. 155-177.
- 16. Nilforoush R: “Anchorage in Concrete Structures: Numerical and Experimental Evaluations of Load-Carrying Capacity of Cast-in-Place Headed Anchors and Post-Installed Adhesive Anchors”. Ph.D. Dissertation, Dep. of Civil, Environment and Natural Resources Engineering, Div. of Structural and Fire Engineering, Luleå University of Technology, Luleå, Sweden, 2017, 354 pp.
- 17. EN 12390-3 (2009). “Testing hardened concrete. Compressive strength of test specimens”. 19 pp.
- 18. EN 12390-6 (2009). “Testing hardened concrete. Tensile splitting strength of test specimens”. 11 pp.
- 19. Nilforoush R, Nilsson M, Elfgren L, Ožbolt J, Hofmann J & Eligehausen, R: “Tensile Capacity of Anchor Bolts in Uncracked Concrete: Influence of Member Thickness and Anchor’s Head Size”. ACI Structural Journal, Vol. 114, No. 6, 2017, pp. 1519-1530
- 20. Nilforoush R, Nilsson M, Elfgren L, Ožbolt J, Hofmann J & Eligehausen R: “Influence of Surface Reinforcement, Member Thickness, and Cracked Concrete on Tensile Capacity of Anchor Bolts”. ACI Structural Journal, Vol. 114, No. 6, 2017, pp. 1543-1556
- 21. Nilforoush, R., Nilsson, M., Elfgren, L., “Experimental Evaluation of Influence of Member Thickness, Anchor-Head Size, and Reinforcement on the Tensile Capacity of Headed Anchors in Uncracked Concrete”, Journal of Structural Engineering, Vol. 144, No. 4, 2018, 14 pp, 04018012-1-14.