References
- 1. Zivkovic J & Øverli J A: “Ultimate compressive strain in lightweight aggregate concrete beams”. Proceedings, 12th fib International PhD Symposium in Civil Engineering, Prague, Czech Republic, August 2018, pp. 829–836.
- 2. Nedrelid H: “Towards a better understanding of the ultimate behavior of lightweight aggregate concrete in compression and bending”. Bulletin No.123 (PhD Thesis), Norwegian University of Science and Technology, Department of Structural Engineering, Trondheim, Norway, 2012, 214 pp.
- 3. Øverli J A: “Towards a better understanding of the ultimate behavior of LWAC in compression and bending”. Engineering Structures, No. 151, 2018, pp. 821–838.
- 4. Markeset G: “Failure of concrete under compressive strain gradients”. Bulletin No.110 (PhD Thesis), Norwegian Institute of Technology, Department of Structural Engineering, University of Trondheim, Trondheim, Norway,1993, 168 pp.
- 5. Carolina Stalite Company: “Production of Stalite”. Salisbury, North Carolina, USA available: https://www.stalite.com/production.
- 6. Standard Norge: “Testing hardened concrete - Compressive strength of test specimens”. Part 3, NS-EN 12390-3:2009, Lysaker, Norway, 2009, 24 pp.
- 7. Standard Norge: “Testing hardened concrete – Tensile strength of test specimens”. Part 6, NS-EN 12390-6:2009, Lysaker, Norway, 2009, 16 pp.
- 8. Skjølsvold O, Bakken N & Johansen E : “Bestemmelse av E-modul iht NS3676 Losenhausen 5000kN trykkpresse”. Betong og natursteinslaboratooriene, KS 14-05-04 122, SINTEF Byggforsk, Trondheim, Norge, 2007. (in Norwegian)
- 9. Standard Norge: “Concrete testing - Hardened concrete - Modules of elasticity in compression”. NS 3676, Norway, 1987, 20 pp.
- 10. Hillerborg A: “The theoretical basis of a method to determine the fracture energy GF of concrete”. RILEM Technical Committees, Materials and Structures, Vol. 18, Issue 4 2005, pp. 291-296.
- 11. Carolina Stalite Company: “Benefits of using Stalite”. North Carolina, USA, accessed October 21. 2009. http://www.stalite.com/why-use-stalite.php?cat=138.html.
- 12. American Concrete Institute: “Guide for structural lightweight aggregate concrete”. ACI213R–03, Farmington Hills, MI, United States, 2003, 38 pp.
- 13. Savija B, Lukovic M, Kotteman G, Chaves F S, de Mendoca Filho F F & Schlangen E: “Development of ductile cementitious composites incorporating microencapsulated phase change materials”. International Journal of Advances in Engineering Sciences and Applied Mathematics, Vol. 9, Issue 3, 2017, pp. 169-180.10.1007/s12572-017-0182-9
- 14. Kuraray Co: “Characteristics of KURALON (PVA fibres), PVA fibres-application”. Japan, available: http://kuralon-frc.kuraray.com/product-application
- 15. Standard Norge: “Testing hardened concrete - Density of hardened concrete”. Part 7, NS-EN 12390-7:2009, Lysaker, Norway, 2009, 16 pp.
- 16. European Union – Brite EuRam III: “Methods for Testing Fresh Lightweight Aggregate Concrete”. BE96-3942/R4, December1999, 51 pp.
- 17. McCormick N & Lord J: “Digital Image Correlation for Structural Measurements”. ICE institution, Civil Engineering, 165 (CE4), 2012, pp. 185–190.
- 18. SINTEF procedure:“Fracture energy of prisms with notch in three point bending test”. KS14-05-04123, September 2007, 3pp.
- 19. European committee for standardization: “Eurocode 2: Design of concrete structures – General rules and rules for buildings”. Part 1-1, EN 1992-1-1 (2004), 2004, 225 pp.