References
- 1. Rouchier S, Foray G, Godin N, Woloszyn M and Roux J-J: Damage monitoring in fibre reinforced mortar by combined digital image correlation and acoustic emission. Construction and Building Materials, Vol. 38, 2013, pp. 371-380.10.1016/j.conbuildmat.2012.07.106
- 2. Alam S Y, Saliba J and Loukili A: Fracture examination in concrete through combined digital image correlation and acoustic emission techniques. Construction and Building Materials, Vol. 69, 2014, pp. 232-242.10.1016/j.conbuildmat.2014.07.044
- 3. Guo M, Alam S Y, Bendimerad A Z, Grondin F, Rozière E and Loukili A: Fracture process zone characteristics and identification of the micro-fracture phases in recycled concrete. Engineering Fracture Mechanics, Vol. 181, 2017, pp. 101-115.10.1016/j.engfracmech.2017.07.004
- 4. Caduff D and van Mier J G M: Analysis of compressive fracture of three different concretes by means of 3D-digital image correlation and vacuum impregnation. Cement and Concrete Composites, Vol. 34, No. 4, 2010, pp. 281-290.10.1016/j.cemconcomp.2010.01.003
- 5. Sutton M A, Orteu J J and Schreier H W: Image correlation for shape, motion and deformation measurements. 2009, Springer, New York.
- 6. Destrebecq J F, Toussaint E and Ferrier E: Analysis of cracks and deformations in a full scale reinforced concrete beam using a digital image correlation technique. Experimental Mechanics, Vol. 51, No. 6, 2010, pp. 879–890.10.1007/s11340-010-9384-9
- 7. Skoček J and Stang H: Application of optical deformation analysis system on wedge splitting test and its inverse analysis. Materials and Structures, Vol. 43, 2010, pp. 63–72.10.1617/s11527-010-9597-5
- 8. Shah S P and Chandra Kishen J M: Fracture properties of concrete-concrete interfaces using digital image correlation. Experimental Mechanics, Vol. 51, No. 3, pp. 303–313.10.1007/s11340-010-9358-y
- 9. Flansbjer M, Lindqvist J E and Silfwerbrand J: Quantitative fracture characteristics in shear load. Proceedings, fib Symposium, Prague, Czech Republic, 8-10 June 2011, pp. 567-570.
- 10. Jacobsen J S, Poulsen P N and Olesen J F: Characterization of mixed mode crack opening in concrete. Materials and Structures, Vol. 45, 2012, pp. 107-122.10.1617/s11527-011-9754-5
- 11. Skarżyński L, Kozicki J and Tejchman J: Application of DIC technique to concrete – Study on objectivity of measured surface displacements. Experimental Mechanics, Vil. 53, 2013, pp. 1545–1559.10.1007/s11340-013-9781-y
- 12. Gencturk B, Hossain K, Kapadia A, Labib E and Mo Y-L: Use of digital image correlation technique in full-scale testing of prestressed concrete structures. Measurement, Vol. 47, 2014, pp. 505–515.10.1016/j.measurement.2013.09.018
- 13. De Wilder K, Lava P, Debruyne D, Wang Y, De Roeck G and Vandewalle J: Experimental investigation on the shear capacity of pre-stressed concrete beams using digital image correlation. Engineering Structures, Vol. 82, 2015, pp. 82–92.10.1016/j.engstruct.2014.10.034
- 14. Hamrat M, Boulekbache B, Chemrouk M and Amziane S: Flexural cracking behavior of normal strength, high strength and high strength fiber concrete beams, using Digital Image Correlation technique. Construction and Building Materials, Vol. 106, 2016, pp. 678–692.10.1016/j.conbuildmat.2015.12.166
- 15. Grosse C U and Ohtsu M: Acoustic Emission Testing, Springer-Verlag, Berlin, Heidelberg, 2008.10.1007/978-3-540-69972-9
- 16. Ohno K and Ohtsu M: Crack classification in concrete based on acoustic emission. Construction and Building Materials, Vol. 34, 2010, pp. 2339-2346.10.1016/j.conbuildmat.2010.05.004
- 17. Fricker S and Vogel T: Site installation and testing of continuous acoustic monitoring. Construction and Building Materials, Vol. 21, 2007, pp. 501-510.10.1016/j.conbuildmat.2006.04.008
- 18. Kencanawati N N, Iizasa S and Shigeishi M: Fracture process and reliability of concrete made from high grade recycled aggregate using acoustic emission technique under compression. Materials and Structures, Vol. 46, 2013, pp. 1441-1448.10.1617/s11527-012-9986-z
- 19. Soulioti D, Barkoula N M, Paipetis A, Matikas T E, Shiotani T and Aggelis D G: Acoustic emission behavior of steel fibre reinforced concrete under bending. Construction and Building Materials, Vol. 23, 2009, pp. 3532-3536.10.1016/j.conbuildmat.2009.06.042
- 20. Muralidhara S, Raghu Prasad B K, Hamid Eskandari and Karihaloo B L: Fracture process zone size and true fracture energy of concrete using acoustic emission. Construction and Building Materials, Vol. 24, 2010, pp. 479-486.10.1016/j.conbuildmat.2009.10.014
- 21. Saliba J, Loukili A, Grondin F and Regoin J P: Identification of damage mechanisms in concrete under high level creep by the acoustic emission technique. Materials and Structures, Vol. 47, 2014, pp. 1041-1053.10.1617/s11527-013-0113-6
- 22. NT BUILD 486: Aggregates: Size distribution. Approved 1998-11, NT BUILD.
- 23. Lindqvist J E and Johansson S: Aggregate shape and orientation in historic mortars. Proceedings, 11th Euroseminar Applied to Building Materials, Ed I Fernandes, 2007.
- 24. RILEM TC 187-SOC: Experimental determination of the stress-crack opening curve for concrete in tension: Final report, May 2007.
- 25. RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: Uni-axial tension test for steel fibre reinforced concrete. Materials and Structures, Vol. 34, 2001, pp. 3-6.10.1007/BF02482193
- 26. van Mier J G M: Concrete Fracture, a Multiscale Approach, CRC Press, 2012. Nordic Concrete Research – Publ. No. NCR 59 – ISSUE 2 / 2018 – Article 3, pp. 31-44