References
- 1. E. Mørtsell, M. Maage, S. Smeplass: “A Particle-Matrix Model for Prediction of Workability of Concrete”, Proceedings, International Conference on Production Methods and Workability of Fresh Concrete”, Glasgow, Scotland 1995, 11 pp.
- 2. Josserand L, Coussy O and de Larrard F: “Bleeding of concrete as an ageing consolidation process”, Cement Concr. Res., V.36, 2006, pp.1603–1608.
- 3. Martius-Hammer T.A., Smeplass S., De Weerdt K., Peng Y.: “Stability of SCC-robustness for changes in water content and sand grading”, COIN Report, Trondheim, Norway, 2013, 27p
- 4. Peng Y., Jacobsen S.: “Influence of water cement ratio, admixtures and filler on sedimentation and bleeding of cement paste”, Cem. Conc. Res., V.54, 2013, pp. 133-142
- 5. Pedersen B.: “Alkali-reactive and inert fillers in concrete – Rheology of fresh mixtures and expansive reactions”, Doctoral thesis, NTNU, Trondheim, Norway, 2004, 292 pp.
- 6. Rhodes M., “Introduction to Particle Technology”, 2nd Edition, 2008, John Wiley &Sons, Ltd, UK, ISBN 978-0-470-01428-8, 474 pp.
- 7. Stokes G.G., Math. Phys. Papers, 1901, Vol. 3
- 8. Richardson J F; Zaki W N.: “The sedimentation of a suspension of uniform spheres under conditions of viscous flow”, Chem. Eng. Sci., V.3, 1954, pp. 65-73
- 9. Kynch G. J:, “A theory of sedimentation”, Trans. Faraday Soc., V.48, 1952, pp.166-17610.1039/tf9524800166
- 10. Powers T.C., “The Properties of Fresh Concrete”, Wiley & Sons, London, 1968, 664 pp.
- 11. Steinour H. H.: “Further studies of the bleeding of Portland cement paste”, Research Bulletin No. 4, Portland Cement Association, Skokie, USA, 1945
- 12. Zingg A., Winnefeld F., Holzer L., Pakusch J., Becker S., Gauckler L.: “Adsorption of polyelectrolytes and its influence on the rheology, zeta-potential, and microstructure of various cement and hydrate phases”, Journal of Coll. Inter. Sci., V.323, 2008, pp. 301-312
- 13. Zingg A., Winnefeld F., Holzer L., Pakusch J., Becker S., Figi R., Gauckler L.: “Interaction of polycarboxylate-based superwater reducers with cements containing different C3A amounts”, Cem. Conc. Comp., V.31, 2009, pp. 153-162
- 14. Hunter R.J.: “Zeta-potential in Colloid Science”. England: Academic Press, 1981
- 15. Williams R.A., Xie C.G., Bragg R., Amarasinghe W.P.K.: “Experimental techniques for monitoring sedimentation in optically opaque suspensions”, Coll. Surf., V.43, 1990, pp.1-32
- 16. Peng Y., Jacobsen S., De Weerdt K., Pedersen B:, “Model and test methods for stability of fresh cement paste”, ASTM-Adv. Civ. Engi. Mat., V.3, 2014, pp. 1-24, doi:10.1520/ACEM2013009710.1520/ACEM20130097
- 17. Peng Y., “Sedimentation and bleeding of fresh cement paste”: Doctoral thesis, Norwegian University of Science and Technology, Trondheim, Norway, 2014:89 ISBN 978-82-326-0102-8 (printed), 2014:89 ISBN 978-82-326-0103-5 (electronic), 2014, NTNU, Norway
- 18. O’Brien R.W., Cannon D.W., Rowlands W.N.: “Electroacoustic Determination of Particle Size and Zeta-potential”, Journal of Coll. Inter. Sci., V.173, 1995, pp. 406-418
- 19. Lank J., C. Hirsch: “Impact of zeta-potential of early cement hydration phases on superwater reducer adsorption”, Cem. Conc. Res., Vol.. 37, 2007, pp. 537-542
- 20. Lesti M., Ng S., Plank J.: “Ca2+ Ion – Mediated Interaction between Microsilica and Polycarboxylate Comb Polymers in Model Cement Pore Solution”, Journal of the Ame. Cer. Soc., V.93, 2010, pp. 3493 – 3498
- 21. Peng Y., Lauten R.A., Reknes K., Jacobsen S. “Bleeding and sedimentation of cement paste measured by hydrostatic pressure and Turbiscan”, Cem. Conc. Com., V.76, 2017, pp. 25-38.