Finite Element Simulation of the Polishing Process for Aluminum Workpieces in the LS-DYNA Software
References
- Bratan S.M., Chasovitina A.S. (2023) Modeling the relationships between input factors and output indicators of the internal grinding process taking into account mutual vibrations of the tool and the workpiece. Metal-working (Technology, Equipment, Tools). 25(1) pp. 57-70. doi:10.17212/1994-6309-2023-25.1-57-70
- Bratan S, Ságová Z, Sága M, Yakimovich B, Kuric I. (2023) New calculation methodology of the operations number of cold rolling rolls fine grinding. Appl Sci. 13(6):3484.
- Bratan S.M, Chasovitina A.S. (2022) Modeling the influence of relative tool and workpiece vibrations on material removal during internal grinding. Sci-Intensive Technol Mech Eng. (9) pp. 3-9. doi:10.30987/2223-46082022-9-3-9
- Pakhalyuk A.V., Stadnik T.V. (2025) Brief analysis of polishing methods for long cylindrical aluminum blanks. Fundam Appl Probl Eng Technol. (5) pp. 224-228. doi:10.33979/2073-7408-2025-373-5-224-228
- Dănuț J. (2017) SPH simulation of single grain action in grinding. MATEC Web Conf. 2017;137:03006. doi:10.1051/matecconf/201713703006
- Anderson D, Warkentin A, Bauer R. (2012) Comparison of spherical and truncated cone geometries for single abrasive grain cutting. J Mater Process Technol. 212 pp. 1946-1953. doi:10.1016/j.jmatprotec.2012.04.021
- Cheng-Ming H. (2021) A357 aluminum alloy cutting performance finite element simulation. Glob J Eng Sci. 7(3) pp. 1-13. doi:10.33552/GJES.2021.07.000667
- Bachurová N, Kudláček J, Kuchař J, Červený J. (2025) The effect of surface pretreatments on the reliability of glass bonded joints. Coatings. 15:232. doi:10.3390/coatings15020232
- Kuchař J, Kreibich V, Agartanov V, Petřík M. (2018) Maintenance and cleaning of heat exchangers. Mater Sci Forum. 919 pp. 396-401. doi:10.4028/www.scientific.net/MSF.919.396
- Kuchař J, Kreibich V, Procházková D, Bachurová N. (2023) Mitigating the risks of energetic facilities by cleaning internal surfaces. In: Proc Int Conf Saf Reliab. doi:10.3850/978-981-18-8071-1_P254-cd
- Kuchař J, Kreibich V, Procházková D, Tláskal F. (2023) Mitigation of risks of corrosion and delamination by surface pre-treatment. In: Proc Int Conf Saf Reliab. doi:10.3850/978-981-18-8071-1_P112-cd
- Zhang Z, Zhang W, Zhang S, Li F. (2019) Chemical mechanical polishing of aluminum alloys using alumina-based slurry. Tribology. 39(1) pp. 109-117. doi:10.16078/j.tribology.2018032
- Wu Z, Shen J, Wu X, Peng Y, Lin S, Huang X, et al. (2023) Research on polishing aluminum alloy optical elements with a new solid flexible bonnet tool. J Manuf Process. pp. 168-180. doi:10.1016/j.jmapro.2023.08.037
- Beigmoradi S, Vahdati M. (2022) Experimental and numerical study of polishing of 2024 aluminum alloy using acoustics energy. J Manuf Process. 73 pp. 440-453. doi:10.1016/j.jmapro.2021.11.009
- Yuan Q, Qi H, Wen D. (2016) Numerical and experimental study on the spiral-rotating abrasive flow in polishing of the internal surface of 6061 aluminium alloy cylinder. Powder Technol. 302 pp. 153-159. doi:10.1016/j.powtec.2016.08.047
- Lin J.W. (2023) Aluminum tube polishing fire problem: a case study. Eur J Eng Technol Res. 8(2) pp. 58-59. doi:10.24018/ejeng.2023.8.2.3022
- Brusov A, et al. (2021) Electropolishing of single crystal and polycrystalline aluminum to achieve high optical and mechanical surfaces. arXiv [Preprint]. arXiv:2102.05752.
- Iquebal A.S, Sagapuram D, Bukkapatnam S. (2019) Surface plastic flow in polishing of rough surfaces. Sci Rep. 9:10617. doi:10.1038/s41598-019-46997-w
- Song P, Yang C, Bai Y, Ding J, Guo J, Li C, et al. (2023) High-precision turning and ultra-smooth direct polishing of aluminum alloy mirrors. Opt Express. 31(19) pp. 30340-30358. doi:10.1364/OE.495779
- Burzic B, Hofele M, Mürdter S, Riegel H. (2017) Laser polishing of ground aluminum surfaces with high energy continuous wave laser. J Laser Appl. 29(1).
- Dev A, Tandon S, Kumar P, Dutt A. (2020) of coating and polishing of cutting tool on machined surface quality in dry machining of aluminium alloy. Def Sci J. 70(3) pp. 299-305. doi:10.14429/dsj.70.14831
- Abbas A.M, Khleif A.A. (2024) Multi-optimization method for new design of angled electrodes and performance enhancement using alloy steel (X210). Management Systems in Production Engineering. Volume 32, Issue 3. pp. 438-449. doi: 10.2478/mspe-2024-0041
- Yu N, Li L, Kee CS. (2021) Modeling and simulation of the surface generation mechanism of a novel low-pressure lapping technology. Micromachines. 12:1510. doi:10.3390/mi12121510
- Abdullah M.A, Abed A.H, Mansor K.K. (2025) Comparison between low-carbon steel end galvanized steel by deep drawing under the influence of different parameters. Management Systems in Production Engineering Volume 33, Issue 2, pp. 163-170 DOI 10.2478/mspe-2025-0016
- Enzi A, Abdulameer A.G, Hassoon O.H, Hamieh A. (2025) Experimental investigation of manufacturing variables effect on electrical discharge machining of titanium alloy. Management Systems in Production Engineering Volume 33, Issue 2, pp. 202-211 DOI 10.2478/mspe-2025-0019
- González Rojas H.A, Sánchez Egea A.J, Travieso-Rodríguez J.A, Llumà i Fuentes J, Jorba Peiró J. (2018) Estimation of the polishing time for different metallic alloys in surface texture removal. Mach Sci Technol. 22(4) pp. 729-741. doi:10.1080/10910344.2017.1402931
- Zhu Y.F, Sheng P.F, Huang Q.S, Wang L, Yu J, Zhang Z, et al. (2025) Theoretical and experimental study of the evolution of surface textures during wheel polishing with fluid cutting model. Adv Manuf. pp. 1-17. doi:10.1007/s40436-025-00574-9
- Bal B, Karaveli K.K, Cetin B, Gumus B. (2019) The precise determination of the Johnson-Cook material and damage model parameters and mechanical properties of aluminum 7068-T651 alloy. J Eng Mater Technol. 141(4). doi:10.1115/1.4042870
- Lesuer D.R, Kay G.J, LeBlanc M.M. (1999) Modeling large-strain, high-rate deformation in metals. In: Proc 3rd Biennial Tri-Laboratory Eng Conf Modeling Simulation. Pleasanton (CA): Lawrence Livermore National Laboratory; pp. 3-5.
- Fraser K, St-Georges L, Kiss L.I. (2015) Numerical simulation of bobbin tool friction stir welding [Internet]. [cited 2025 Nov 16]. Available from: https://www.researchgate.net/publication/275271390
- Altair Engineering. EOS/Gruneisen block format keyword [Internet]. (2023) [cited 2025 Nov 16]. Available from: https://2023.help.altair.com/2023/hwsolvers/rad/topics/solvers/rad/eos_gruneisen_starter_r.htm
- Rubin M.B, Herbolt E.B. (2020) An analytical expression for temperature in a thermodynamically consistent model with a Mie-Gruneisen equation for pressure. Int J Impact Eng. 143:103612. doi:10.1016/j.ijimpeng.2020.103612
- Anand R.K, (2025) On the jump conditions for shock waves in condensed materials [Internet]. [cited 2025 Nov 16]. Available from: https://arxiv.org/html/2502.09677v1
- Kopas P, Blatnicky M, Sága M, Vasko M. (2017) Identification of mechanical properties of weld joints of AlMgSi07.F25 aluminium alloy. Metalurgija. 56(1-2) pp. 99-102.
- Sága M, Kopas P, Uhrícík M. Modeling and Experimental Analysis of the Aluminium Alloy Fatigue Damage in the case of Bending – Torsion Loading. Modelling of Mechanical and Mechatronics Systems, Vol. 48, pp. 599-606, DOI10.1016/j.proeng.2012.09.559
Language: English
Page range: 631 - 647
Submitted on: May 1, 2026
Accepted on: Oct 1, 2026
Published online: Nov 17, 2026
Published in print: Dec 1, 2026
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Keywords:
Related subjects:
© 2026 Sergei Bratan, Milan Sága, Andrei Pakhaliuk, Vladimir Pakhaliu, Jiří Kuchař, Boris Yakhimovich, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 License.