Investigation of Intensive Wear Zones of an Oil Press Screw During Oilseed Processing
References
- Abdilova, G., Sergibayeva, Z., Orynbekov, D., Shamenov, M., Zhumadilova, G., Bakiyeva, A., Mukashev, N., Bayadilova, A., Dukenbayev, D. (2023) “Influence of Grinding Degree and Screw Rotation Speed on Sunflower Oil Pressing Process”, Applied Sciences, vol. 13, 9958, doi: 10.3390/app13179958.
- Suchocki, T. (2024) Energy Utilization of Rapeseed Biomass in Europe: A Review of Current and Innovative Applications”, Energies, vol. 17, 6177, doi: 10.3390/en17236177.
- Kuku, R.O., Adefuye, O.A., Fadipe, O.L., Adebowale, G.I., Delogan, O.M. (2020) “Development of groundnut oil expelling machine”, Engineering & Technology Research Journal, vol. 5(2), pp. 93-100, doi: 10.47545/etrj.2020.5.2.072.
- Panjaitan, N., Lubis, J.A., Silitonga, N.K., Faris, M.Z. (2025) “Root Cause Analysis of Oil Losses in Press Machines Using Fault Tree Analysis Method”, Engineering Proceedings, vol. 84, p. 96, doi: 10.3390/engproc2025084096.
- Sarbenia, Saputra, A. (2023) “Identification of Screw Press Machine Damage Using Failure Mode and Effect Analysis Method in PT. Socfindo Seunagan”, Jurnal Inovasi Teknologi dan Rekayasa, vol. 8(1), pp. 123-127, doi: 10.31572/inotera.Vol8.Iss1.2023.ID225.
- Mridula, D., Saha, D., Gupta, R., Bhadwal, S., Arora, S., Kumar, P., Kumar, S.R. (2020) “Oil expelling from whole and dehulled sunflower seeds: Optimization of screw pressing parameters and physico-chemical quality”, Journal of Food Processing and Preservation, vol. 8, pp. 4002-4009, doi: 10.22271/chemi.2020.v8.i4ay.10274.
- Bako, T., Obetta, S.E., Umogbai, V.I. (2020) “Mathematical modeling of mechanical horizontal screw oil extractor”, Agricultural Engineering International: CIGR Journal, vol. 22, pp. 244-254, 2020.
- Muratzhankyzy, N., Kassenov, A., Moldabayeva, Z., Tokhtarova, S., Tokhtarov, Z., Kakimov, M., Orynbekov, D. (2022) “Design and engineering calculation of a screw press for extracting juice from sea buckthorn”, ARPN Journal of Engineering and Applied Sciences, vol. 17, pp. 2943-2949.
- Carré, P. (2022) “New approach for the elucidation of the phenomena involved in the operation of vegetable oil extraction presses”, OCL - Oilseeds and Fats, Crops and Lipids, vol. 29, p. 12, doi: 10.1051/ocl/2021048.
- Mursalykova, M., Kakimov, M., Kassenov, A., Iskakov, B., Sergibayeva, Z., Kaspakov, E., Zhumadilova, G., Shulenova, A., Kokayeva, G., Suychinov, A. (2023) “Mathematical Modeling of Screw Press Configuration for Processing Safflower Oil”, Applied Sciences, vol. 13, p. 3057, doi: 10.3390/app13053057.
- Kakimov, M., Mursalykova, M., Gajdzik, B., Wolniak, R., Kokayeva, G., Bembenek, M. (2024) “Optimal Ways of Safflower Oil Production with Improvement of Press Equipment”, Foods, vol. 13, p. 1909, doi: 10.3390/foods13121909.
- Ariani, F., Tugiman, Nasution, D.M., Sibarani, H. (2020) “Corrective Maintenance of Worm Gear a Screw Press Machine with a capacity of 30 tons per hour using Wear Analysis and its response to Conus Pressure”, IOP Conference Series: Materials Science and Engineering, vol. 851, p. 012006, doi: 10.1088/1757-899X/851/1/012006.
- Kyaw Aung, Than Naing Win, Aung Ko Win, Cho Cho Khaing. (2019) “Design and Stress Analysis of Screw Press Oil Expeller”, IRE Journals, vol. 3(1).
- Muhammad, I.B., Husaini, H., Ali, N., Rauzatul, A., Teuku, E.P. (2021) “Failure analysis of the short drive shaft in a screw press machine”, Key Engineering Materials, vol. 892, pp. 74-80, doi: 10.4028/www.scientific.net/KEM.892.74.
- Barati, Z., Romuli, S., Eberle, T., Müller, J. (2022) “Oil extraction from mango kernels using a mechanical screw press”, Tropentag Conference,
- Ugarte-Espinoza, P.P., Delgado-Soriano, V., Estivi, L., Hidalgo, A., Pascual-Chagman, G. (2021) “Goldenberry (Physalis peruviana L.) seed oil: Press extraction, optimization, characterization, and oxidative stability”, Italian Journal of Food Science, vol. 33(4), pp. 107-117, doi: 10.15586/ijfs.v33i4.2123.
- Babenko, D., Dotsenko, N., Gorbenko, O. (2024) “Study of structural and kinematic characteristics of an energy-efficient oil press”, Ukrainian Black Sea Region Agrarian Science, vol. 28(3), pp. 41-54, doi: 10.56407/bs.agrarian/2.2024.41.
- Kachur, O., Korendiy, V., Havran, V. (2023) “Designing and simulation of an enhanced screw-type press for vegetable oil production”, Computer Design Systems. Theory and Practice, vol. 5(1), pp. 128-136, doi: 10.23939/cds2023.01.128.
- Lobur, M., Korendiy, V., Kachur, O., Havran, V. (2024) “Automation of the Oil Extraction Process Performed by Means of a Screw Press”, Acta Mechanica et Automatica, vol. 18(4), doi: 10.2478/ama-2024-0070.
- Korendiy, V.M., Havran, V.B. (2024) “Analysis of the oil extraction process and prospects of automation of screw press operation”, Scientific Bulletin of UNFU, vol. 34(1), pp. 85-90, doi: 10.36930/40340112.
- Romanić, R., Lužaić, T. (2025) “Engineering Assessment of Small-Scale Cold-Pressing Machines and Systems: Design, Performance, and Sustainability of Screw Press Technologies in Serbia”, Eng, vol. 6, p. 347, doi: 10.3390/eng6120347.
- Dotsenko, N.A., Gorbenko, O.A., Batsurovska, I.V. (2023) “Investigation of constructive and technological parameters of an energy-efficient screw oil press”, IOP Conference Series: Earth and Environmental Science, vol. 1254, p. 012135, doi: 10.1088/1755-1315/1254/1/012135.
- Hudzenko, M., Vasyliv, V., Zheplinska, M., Sarana, V., Gorenkov, D. (2023) “Study of the effectiveness of the design of the oil removal channels of screw presses for squeezing out oil”, Animal Science and Food Technology, vol. 14(4), pp. 58-73, doi: 10.31548/animal.4.2023.58.
- Kassenov, A., Muratzhankyzy, N., Mursalykova, M., Kokayeva, G., Tokaev, S. (2025) “Effect of Pressure Regulating Mechanism on Screw Pressing Efficiency and Production Capacity in Sea Buckthorn (Hippophae rhamnoides) Juice Extraction”, Applied Sciences, vol. 15(3), p. 1130, doi: 10.3390/app15031130.
- Khalaf, M., Xuan, T., Qenawy, M., Mustafa, H.M.M., El-Mesery, H.S., Esmail, M.F.C. (2024) “Investigation and optimization of bio-oil extraction from mixed Jatropha-Castor seeds using screw-pressing methodology”, Process Safety and Environmental Protection, vol. 188, pp. 217-229, doi: 10.1016/j.psep.2024.05.098.
- Rathod, M.L., Angadi, B.M., Bhavi, I.G. (2025) “A review on optimization of process parameters of cold pressed oil extraction for high output and enhanced quality and retained nutrients”, Food and Humanity, vol. 5, doi: 10.1016/j.foohum.2025.100698.
- Zhang, Y., Tian, Y., Meng, Y. (2021) “Wear Behavior of Spindles of Cotton Picker in Field Work”, Journal of Tribology, vol. 143, p. 021703.
- Bembenek, M., Krawczyk, J., Pańcikiewicz, K. (2022) “The wear mechanism of mill beaters for coal grinding made-up from high manganese cast steel”, Engineering Failure Analysis, vol. 142, p. 10684, doi: 10.1016/j.engfailanal.2022.106843.
- Pawlik, J., Prysyazhnyuk, P., Vytvytskyi, V., Medvid, I., Bembenek, M. (2026) “Comparative Analysis of Micro-structure, Phase Composition, and Wear Characterization of Fe-Cr-C, Fe-Mn-Mo-B, and Ni-WC Hardfacing Alloys”, Coatings, vol. 16, p. 178, doi: 10.3390/coatings16020178.
- Vargova, M., Tavodova, M., Monkova, K., Dzupon, M. (2022) “Research of Resistance of Selected Materials to Abrasive Wear to Increase the Ploughshare Lifetime”, Metals, vol. 12, p. 940, doi: 10.3390/met12060940.
- Kumar, A., Sharma, A.K., Katiyar, J.K. (2023) “State-of-the-Art in Sustainable Machining of Different Materials Using Nano Minimum Quality Lubrication (NMQL)”, Lubricants, vol. 11, p. 64.
- Owunna, I.B., Ikpe, A.E. (2023) “A Technical report on the effects of lubricating fluids (lubricants) on service performance of machine parts”, International Summit Scientific Research Congress, pp. 509-528.
- Wang, Y., Li, D., Nie, C., Gong, P., Yang, J., Hu, Z., Li, B., Ma, M. (2023) “Research Progress on the Wear Resistance of Key Components in Agricultural Machinery”, Materials, vol. 16, p. 7646, doi: 10.3390/ma16247646.
- Xu, S., Li, S., Wang, S., Gao, J., Cao, R., Feng, Q., Li, H., Mao, X. (2022) “Research Status and Prospect of Direct Strip Casting Manufactured Low-Carbon Microalloyed Steel”, Journal of Iron and Steel Research International, vol. 29, pp. 17-33.
- Zhang, H., Tang, Z., Gu, X., Zhang, B. (2025) “Understanding the Lubrication and Wear Behavior of Agricultural Components Under Rice Interaction: A Multi-Scale Modeling Study”, Lubricants, vol. 13, p. 388, doi: 10.3390/lubricants13090388.
- Savoire, R., Lanoiselle, J.-L., Vorobiev, E. (2013) “Mechanical continuous oil expression from oilseeds: A review”, Food and Bioprocess Technology, vol. 6, pp. 1-16, doi: 10.1007/s11947-012-0947-x.
- Chapuis, A., Blin, J., Carré, P., Lecomte, D. (2014) “Separation efficiency and energy consumption of oil expression using a screw-press: The case of Jatropha curcas L. seeds”, Industrial Crops and Products, vol. 52, pp. 752-761, doi: 10.1016/j.indcrop.2013.11.046.
- Bogaert, L., Mathieu, H., Mhemdi, H., Vorobiev, E. (2018) “Characterization of oilseeds mechanical expression in an instrumented pilot screw press”, Industrial Crops and Products, vol. 121, pp. 106-113, doi: 10.1016/j.indcrop.2018.04.039.
- Kovalyshyn, S., Tomyuk, V. (2018) “Research on power consumption of screw press for pressing of oil from rape seed”, BIO Web of Conferences, vol. 10, p. 02011, doi: 10.1051/bioconf/20181002011.
- Indartono, Y.S., Heriawan, H., et al. (2019) “Innovative and flexible single screw press for the oil extraction of Calophyllum seeds”, Research in Agricultural Engineering, vol. 65(3), pp. 91-97, doi: 10.17221/85/2018-RAE.
- Archard, J.F. (1953) “Contact and rubbing of flat surfaces”, Journal of Applied Physics, vol. 24(8), pp. 981-988, doi: 10.1063/1.1721448.
- Motaln, M., et al. (2024) “A design of experiments-guided numerical study of screw conveyor performance and wear-related parameters”, Applied Sciences, vol. 14(7), p. 3064, doi: 10.3390/app14073064.
- Ivanov, O., Prysyazhnyuk, P., Lutsak, D., Matviienkiv, O., Aulin, V. (2020) “Improvement of Abrasion Resistance of Production Equipment Wear Parts by Hardfacing with Flux-Cored Wires Containing Boron Carbide/Metal Powder Reaction Mixtures”, Management Systems in Production Engineering, vol. 28, no. 3, pp. 178-183, doi: 10.2478/mspe-2020-0026.
- El-Ashry, A.S., Tawfik, M.A. (2016) “The screw wear influence on the performance of an oilseed expeller”, Misr Journal of Agricultural Engineering, vol. 33(4), pp. 1315-1328, doi: 10.21608/mjae.2016.97599.
- Prysyazhnyuk, P., Bembenek, M., Drach, I., Korzhov, A., Romanyshyn, L., Ropyak, L. (2024) “Restoration of the Impact Crusher Rotor Using FCAW with High-Manganese Steel Reinforced by Complex Carbides”, Management Systems in Production Engineering, vol. 32, no. 2, pp. 294-302, doi: 10.2478/mspe-2024-0028.
- Koshevoy, E.P. (2001) Technological equipment of vegetable oil production enterprises. St. Petersburg: GIORD, - 368 p.
- Archard, J.F. (1953) “Contact and Rubbing of Flat Surfaces”, Journal of Applied Physics, vol. 24(8), pp. 981-988, doi: 10.1063/1.1721448.
- Stanković, M.S., Marinković, A., Grbović, A. et al. (2019) “Determinati on of Archard’s wear coefficient and wear simulation of sliding bearings”, Industrial Lubrication and Tribology, vol. 71(1), pp. 119-125, doi: 10.1108/ILT-08-2018-0302.
Language: English
Page range: 614 - 630
Submitted on: May 1, 2026
Accepted on: Oct 1, 2026
Published online: Nov 17, 2026
Published in print: Dec 1, 2026
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Related subjects:
© 2026 Gulnara Kokayeva, Mukhtarbek Kakimov, Zhanat Ramazanova, Maigul Mursalykova, Akerke Sarsenkyzy, Michał Bembenek, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 License.