References
- Wadsworth, H.M., Stephens, K.S., Godfrey, A.B. (2002). Modern methods for quality control and improvement (2nd ed.). Wiley, Hoboken.
- Siwiec, D., Pacana, A. (2021). Method of improve the level of product quality. Production Engineering Archives, Vol. 27, No. 1, pp. 1-7. https://doi.org/10.30657/pea.2021.27.1
- Siwiec, D., Pacana, A., Gavurová, B., Ključnikov, A., Nagy, S. (2024). Qualitative-environmental aspects of products improvement in SMEs from V4 countries. Production Engineering Archives, Vol. 30, No. 1, pp. 75-85. https://doi.org/10.30657/pea.2024.30.7
- Montgomery, D.C. (2020). Introduction to statistical quality control (8th ed.). Wiley, Hoboken.
- Wheeler, D. (1993). Understanding Variation: The Key to Managing Chaos. SPC Press, Knoxville, TN (USA).
- Chakraborti, S., Human, S.W., Graham, M.A. (2021). Statistical process monitoring: Control charts and beyond. Journal of Quality Technology, Vol. 53, No. 1, pp. 1-28. https://doi.org/10.1080/00224065.2020.1759381
- Peter, G., Krämer, A., Rupprecht, C., Berthold, B. (2002). Preventive quality management. Expert Systems: The Technology of Knowledge Management and Decision Making for the 21st Century, Vol. 5, pp. 1413-1455. https://doi.org/10.1016/B978-012443880-4/50083-1
- Park, J., Rhim, H., Kim, Y. (2024). Understanding the Concepts of Proactive Quality Management and Its Cases. Journal of Korean Society for Quality Management. Vol. 52, No. 4, pp. 845-873. https://doi.org/10.7469/jksqm.2024.52.4.845
- Knop, K., Ulewicz, R. (2022). Solving Critical Quality Problems by Detecting and Eliminating their Root Causes – Case Study from the Automotive Industry. Materials Research Proceedings, Vol. 24, pp. 181-188. https://doi.org/10.21741/9781644902059-27
- Madanhire, I., Mbohwa, C. (2016). Application of Statistical Process Control (SPC) in Manufacturing Industry in a Developing Country. Procedia CIRP, Vol. 40, pp. 580-583. https://doi.org/10.1016/j.procir.2016.01.137
- Bosch Gmbh (2020). Technical Statistics: Statistical Process Control. Booklet No. 7.
- Halevi, G., Weill, R.D. (1995). SPC – statistical process control. Principles of Process Planning. Springer, Dordrecht. https://doi.org/10.1007/978-94-011-1250-5_12
- Wetherill, G.B., Brown, D.W. (1991). Statistical Process Control: Theory and Practice, Third Edition. Taylor & Francis.
- Woodall, W.H., Montgomery, D.C. (2014). Some current directions in the theory and application of statistical process monitoring. Journal of Quality Technology, Vol. 46, No. 1, pp. 78-94. https://doi.org/10.1080/00224065.2014.11917947
- Bredl, J. (2025). Quality Prediction of Spheroidal Graphite Cast Iron for Machine Tool Parts. Manufacturing Technology, Vol. 25, No. 3, pp. 287-296. https://doi.org/10.21062/mft.2025.032
- IPC (2016). IPC-6012D: Qualification and Performance Specification for Rigid Printed Boards. IPC International.
- Fontalvo, T., Banquez, A., Fontalvo, A. (2025). Method of evaluation and quality control by means of Y performance curves and RPC curves of Six Sigma metrics of a concurrent system. Production Engineering Archives, Vol. 31, No. 4, 504-516. https://doi.org/10.30657/pea.2025.31.47
- AIAG (2026). AIAG & VDA SPC Draft (draft for stakeholder review, published February 2026).
- Mishra, P., Pandey, C.M., Singh, U., Gupta, A., Sahu, C., Keshri, A. (2019). Descriptive statistics and normality tests for statistical data. Annals of Cardiac Anaesthesia, Jan-Mar, Vol. 22, No. 1, pp. 67-72. https://doi.org/10.4103/aca.ACA_157_18.
- Barbato, G., Barini, E., Genta, G., Levi, R. (2011). Features and performance of some outlier detection methods. Journal of Applied Statistics, Vol. 38, No. 10, pp. 2133-2149. https://doi.org/10.1080/02664763.2010.545119
- Cousineau, D., Chartier, S. (2010). Outliers detection and treatment: A review. International Journal of Psychological Research, Vol. 3, No. 1, pp. 59-68. https://doi.org/10.21500/20112084.844
- Dastjerdy, B., Saeidi, A., Heidarzadeh, S. (2023). Review of applicable outlier detection methods to treat geomechanical data. Geotechnics, Vol. 3, No. 2, pp. 375-396. https://doi.org/10.3390/geotechnics3020022
- Openstax (2025). The normal distribution. Introductory Statistics (2nd ed.). OpenStax.
- Online Statistics Textbook (n.d.). Introduction to normal distributions. Retrieved from: Online Statistics Book.
- Das, K.R., Imon, A.H. M.R. (2016). A Brief Review of Tests for Normality. American Journal of Theoretical and Applied Statistics, Vol. 5, No. 1, pp. 5-12. https://doi.org/10.11648/j.ajtas.20160501.12
- Kim H.Y. (2013). Statistical notes for clinical researchers: Assessing normal distribution (2) using skewness and kurtosis. Restorative Dentistry and Endodontics, Vol. 38, No. 1, pp. 52-54. https://doi.org/10.5395/rde.2013.38.1.52
- Czabak-Górska, I. (2017). The classification and characteristics of control charts. CBU International Conference Proceedings, Vol. 5, pp. 86-93. https://doi.org/10.12955/cbup.v5.907
- Ryan, T.P. (2011). Statistical methods for quality improvement (3rd ed.). Wiley, Hoboken.
- Salacinski, T. (2015). SPC – Statistical Process Control. Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa.
- Oakland, J.S. (2003). Statistical Process Control, 5th ed. Butterworth-Heinemann: Oxford, UK; ISBN 978-0-7506-5766-2.
- ISO 22514-1:2014. Statistical Methods in Process Management – Capability and Performance – Part 1: General Principles and Concepts. ISO: Geneva, Switzerland.
- QI Macros (n.d.). XmR Target USL/LSL Control Chart Excel. Baseline Limits. QI Macros. Retrieved from: http://www.qimacros.com/control-chart/xmr-target-chart
- QI Macros (n.d.). XmR Trend Chart Formula. QI Macros. Retrieved from: http://www.qimacros.com/control-chart-formulas/xmr-trend-chart-formula/
- Chananet, CH., Areepong, Y., Sukparungsee, S. (2023). On Designing a Moving Average-Range Control Chart for Enhancing a Process Variation Detection. Applied Science and Engineering Progress, Vol. 17, No 1, 6882. https://doi.org/10.14416/j.asep.2023.06.001
- NCSS Statistical Software (n.d.). Moving Average Charts (Chapter 248). NCSS, LLC. Retrieved from: https://www.ncss.com/wp-con-css.com/wp-content/themes/ncss/pdf/Procedures/NCSS/Moving_Average_Charts.pdf
- National Institute of Standards and Technology (n.d.). EWMA control charts. Process Monitoring and Control (Section 6.3.2.4, NIST/SEMATECH Engineering Statistics Handbook). Retrieved from: http://www.itl.nist.gov/div898/handbook/pmc/section3/pmc324.htm
- NCSS Statistical Software (n.d.). Exponentially Weighted Moving Average (EWMA) Charts. NCSS, LLC. Retrieved from: http://www.ncss.com/wp-content/themes/ncss/pdf/Procedures/NCSS/EWMA_Charts.pdf"
- Bower, K.M. (2001). Using CUSUM Charts to Detect Small Process Shifts. International Society of Six Sigma Professionals: EXTRAOrdinary Sense, Vol. 2, No. 3, pp. 1-8.
- NCSS Statistical Software (n.d.). Cumulative Sum (CUSUM) Charts. NCSS, LLC. Retrieved from: content/themes/ncss/pdf/Procedures/NCSS/CUSUM_Charts.pdf
- Ali, S., Pievatolo, A., Göb, R. (2016). An Overview of Control Charts for High-quality Processes. Quality and Reliability Engineering International, Vol. 32, No. 7, pp. 2171-2189. https://doi.org/10.1002/qre.1957
- Holst, E., Kulahci, M. (2011). Hotelling’s T2 – An Introduction to Theory and Applications. Proceedings of the 33rd Symposium in Applied Statistics. Copenhagen, Denmark.
- Saritha, M.B., Varadharajan, R., (2023). Multivariate Hotelling-T2 Control Chart for Neutrosophic Data. Mathematics and Statistics, Vol. 11, pp. 288-293. https://doi.org/10.13189/ms.2023.110206
- Kotz, S., Lovelace, C.R. (1998). Process capability indices in theory and practice. Arnold, London.
- Benková, M., Bednárová, D., Bogdanovská, G. (2024). Process Capability Evaluation Using Capability Indices as a Part of Statistical Process Control. Mathematics, Vol. 12, No. 11, 1679. https://doi.org/10.3390/math12111679
- Darmawan, A., Bahri, S., Amar, K., DO Bagus, M.R., Tahir, N. (2025). A flexible resubmitted variable sampling plan for product quality determination using the process loss index. Production Engineering Archives, Vol. 31, No. 2, pp. 201-211. https://doi.org/10.30657/pea.2025.31.20
- Ramos, I.M.J. (2025). Maximizing cleaning efficiency and minimizing rework in a recycling facility using the DMAIC approach. Production Engineering Archives, Vol. 31, No. 4, pp. 481-492. https://doi.org/10.30657/pea.2025.31.45
- Woodall, W., Spitzner, D., Montgomery, D., Gupta, S. (2004). Using Control Charts to Monitor Process and Product Quality Profiles. Journal of Quality Technology, Vol. 36, pp. 309-320. https://doi.org/10.1080/00224065.2004.11980276
- Oliveira Da Silva, F.M., Silvério, K.S., Castanheira, M.I., Raposo, M., Imaginário, M.J., Simões, I., Almeida, M.A. (2022). Construction of Control Charts to Help in the Stability and Reliability of Results in an Accredited Water Quality Control Laboratory. Sustainability, Vol. 14, No. 22, pp. 15392. https://doi.org/10.3390/su142215392
- Mcneese, B. (2014). Control Charts and Non-Normal Data. SPC for Excel Knowledge Base. Retrieved from: http://www.spcforexcel.com/knowledge/variable-control-charts/control-charts-and-non-normal-data/
- TIBCO (n.d.). TIBCO Statistica 14.0.0. Retrieved from: https://docs.tibco.com/products/tibco-statistica-14-0-0
- SPC For Excel (2017). Applying the Out of Control Tests. SPC for Excel Knowledge Base. Retrieved from: http://www.spcforexcel.com/knowledge/control-chart-basics/applying-out-of-control-tests/
- Lahyani, H., Al Khatib, A., Abdelfettah, A. (2025). Computerized Decision Support System (CDSS) for Engineering Change Management in Automotive Wiring Harness Projects. Production Engineering Archives, 31(3), 356-375. https://doi.org/10.30657/pea.2025.31.33
- Rosak-Szyrocka, J., Knop, K. (2024). Navigating the Fourth Industrial Revolution: Insights from a comprehensive bibliometric study on Industry 4.0. Production Engineering Archives, Vol. 30, No. 4, pp. 501-519. https://doi.org/10.30657/pea.2024.30.47
- Ulewicz, R., Czerwinska, K., Pacana, A. (2023). A Rank Model of Casting Non-Conformity Detection Methods in the Context of Industry 4.0. Materials, Vol. 16, No. 2, 723. https://doi.org/10.3390/ma16020723
- Pacana, A., Czerwińska, K. (2020). Improving the quality level in the automotive industry. Production Engineering Archives, Vol. 26, No. 4, pp. 162-166. https://doi.org/10.30657/pea.2020.26.29
- Czajkowska, A., Ingladi, M. (2022). Influence of Steel Fibers Content on Selected Mechanical Properties – Experimental Tests. Manufacturing Technology, Vol. 22, No. 3, pp. 267-278. https://doi.org/10.21062/mft.2022.039
- Cézová, E. (2022). Tools for Advanced Control Processes in Plastic Injection Moulding Technology. Manufacturing Technology, Vol. 22, No. 6, pp. 660-668. https://doi.org/10.21062/mft.2022.077
- Cieślińska, B., Oleksiak, B. (2023). The use of quality management tools to ensure safe working conditions at CO2 laser workstations. Production Engineering Archives, Vol. 29, No. 4, pp. 393-400. https://doi.org/10.30657/pea.2023.29.44
- Knop, K. (2021). The use of quality tools to reduce surface defects of painted steel structures. Manufacturing Technology, Vol. 21, No. 6, pp. 805-817. https://doi.org/10.21062/mft.2021.088
- Ulewicz, R. (2014). Practical Application of Quality Tools in the Cast Iron Foundry. Manufacturing Technology, Vol. 14, No. 1, pp. 104-111. https://doi.org/10.21062/ujep/x.2014/a/1213-2489/MT/14/1/104
- Wolniak, R. (2019). Problems of use of FMEA method in industrial enterprise. Production Engineering Archives, Vol. 23, No. 23, pp. 12-17. https://doi.org/10.30657/pea.2019.23.02
- Czajkowska, A., Ingladi, M. (2021). Application of SERV-QUAL and SERVPERF methods to assess the quality of teaching services – comparative analysis. Manufacturing Technology, Vol. 21, No. 3, pp. 294-305. https://doi.org/10.21062/mft.2021.041
Language: English
Page range: 300 - 312
Submitted on: Nov 1, 2025
Accepted on: Apr 1, 2026
Published on: Apr 30, 2026
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Related subjects:
© 2026 Krzysztof Knop, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.