References
- Ngoup, T. et al. (2024) ‘Physical, Chemical and Mechanical Characterization of Sida Rhombifolia Fibers from the Center Region of Cameroon for their potential use in textiles and composites’, Journal of Natural Fibers, 21(1). Available at: https://doi.org/10.1080/15440478.2023.2294478.
- Abdulkareem, M. et al. (2024) ‘Compressive and Flexural Strengths of Bio-Recycled Concrete Incorporated with Kenaf Fibre’, Journal of Natural Fibers, 21(1). Available at: https://doi.org/10.1080/15440478.2023.2296913.
- Alimuzzaman, S. et al. (2024) ‘A Novel Approach of Manufacturing Sustainable Seamless Jute Bags and Evaluation of Its Properties: A Comparative Study with Commercial Bags’, Journal of Natural Fibers, 21(1). Available at: https://doi.org/10.1080/15440478.2023.2299548.
- Haniel, Bawono, B. and Anggoro, P.W. (2023) ‘Optimization of Characteristics Polymer Composite Reinforced Kenaf and Jute Fiber Using Taguchi-Response Surface Methodology Approach’, Journal of Natural Fibers, 20(2). Available at: https://doi.org/10.1080/15440478.2023.2204453.
- Mahardika, M. et al. (2024) ‘Recent Developments in Oil Palm Empty Fruit Bunch (OPEFB) Fiber Composite’, Journal of Natural Fibers, 21(1). Available at: https://doi.org/10.1080/15440478.2024.2309915.
- Shahapurkar, K. et al. (2024) ‘Impact and Compression Behavior of Habesha Moringa/Bamboo Fiber Reinforced Epoxy Composites’, Journal of Natural Fibers, 21(1). Available at: https://doi.org/10.1080/15440478.2024.2311301.
- Dejene, B.K. (2024) ‘False Banana (Enset Ventricosum) Fibers: An Emerging Natural Fiber with Distinct Properties, Promising Potentials, Challenges and Future Prospects – A Critical Review’, Journal of Natural Fibers, 21(1). Available at: https://doi.org/10.1080/15440478.2024.2311303.
- Gudayu, A.D. et al. (2022) ‘Effect of surface treatment on moisture absorption, thermal, and mechanical properties of sisal fiber’, Journal of Industrial Textiles, 51(2), pp. 2853S-2873S. Available at: https://doi.org/10.1177/1528083720924774.
- Jagadeesh, P. et al. (2022) ‘Recent developments and challenges in natural fiber composites: A review’, Polymer Composites, 43(5), pp. 2545-2561. Available at: https://doi.org/https://doi.org/10.1002/pc.26619.
- Carlquist, S. (1996) ‘Wood and bark anatomy of lianoid Indomalesian and Asiatic species of Gnetum’, Botanical Journal of the Linnean Society, 121(1), pp. 1-24. Available at: https://doi.org/10.1006/bojl.1996.0021.
- Barua, C.C., Haloi, P. and Barua, I.C. (2015) ‘Gnetum gnemon linn: A comprehensive review on its biological, pharmacological and pharmacognostical potentials’, International Journal of Pharmacognosy and Phytochemical Research, 7(3), pp. 531-539.
- Aiso-Sanada, H. et al. (2018) ‘Reaction wood anatomy and lignin distribution in Gnetum gnemon branches’, Journal of Wood Science, 64(6), pp. 872-879. Available at: https://doi.org/10.1007/s10086-018-1772-2.
- Anisong, N. et al. (2022) ‘A comprehensive review on nutritional contents and functional properties of Gnetum gnemon Linn.’, Food Science and Technology (Brazil), 42. Available at: https://doi.org/10.1590/fst.100121.
- Salhuteru, A. and Hutubessy, F.K. (2020) ‘The Transformation of Noken Papua: Understanding the Dynamics of Noken’s Commodification as the Impact of UNESCO’s Heritage Recognition’, JSW (Jurnal Sosiologi Walisongo), 4(2), pp. 151-164. Available at: https://doi.org/10.21580/jsw.2020.4.2.5569.
- Irnawati, I. et al. (2023) ‘Social Culture and Localism of Mee Tribe In Knowing Noken At Beko Village Obano District Regency Paniai, Province of Papua’, KnE Social Sciences, 2023, pp. 45-53. Available at: https://doi.org/10.18502/kss.v8i4.12881.
- da Silva, T.T. et al. (2022) ‘Dynamic Mechanical Analysis and Ballistic Performance of Kenaf Fiber-Reinforced Epoxy Composites’, Polymers, 14(17), pp. 1-14. Available at: https://doi.org/10.3390/polym14173629.
- Mohd Radzuan, N.A. et al. (2020) ‘New processing technique for biodegradable kenaf composites: A simple alternative to commercial automotive parts’, Composites Part B: Engineering, 184, p. 107644. Available at: https://doi.org/https://doi.org/10.1016/j.compositesb.2019.107644.
- Palanisamy, S. et al. (2024) ‘The prospects of natural fiber composites: A brief review’, International Journal of Lightweight Materials and Manufacture, 7(4), pp. 496-506. Available at: https://doi.org/10.1016/j.ijlmm.2024.01.003.
- Ermeydan, M.A. (2024) ‘New Methodologies to Improve the Interfacial Interaction in Natural Fibre Polymer Composites BT – Interfacial Bonding Characteristics in Natural Fiber Reinforced Polymer Composites: Fiber-matrix Interface In Biocomposites’, in S. Krishnasamy et al. (eds). Singapore: Springer Nature Singapore, pp. 23-45. Available at: https://doi.org/10.1007/978-981-99-8327-8_2.
- Patti, A. and Acierno, D. (2023) ‘Materials, Weaving Parameters, and Tensile Responses of Woven Textiles’, Macromol, 3(3), pp. 665-680. Available at: https://doi.org/10.3390/macromol3030037.
- Shiyong, J. et al. (2013) ‘Simple device applicable to fiber reinforcement tensile strength test’.
- Arifin, Y.F. et al. (2023) ‘Equipment for Testing the Tensile Strength of Natural Fibers: Design and Implementation’, IOP Conference Series: Earth and Environmental Science, 1184(1), pp. 0-6. Available at: https://doi.org/10.1088/1755-1315/1184/1/012002.
- Sitotaw, D.B. and Adamu, B.F. (2017) ‘Tensile Properties of Single Jersey and 1×1 Rib Knitted Fabrics Made from 100% Cotton and Cotton/Lycra Yarns’, Journal of Engineering (United Kingdom), 2017. Available at: https://doi.org/10.1155/2017/4310782.
- Abot, J.L., Gabbai, R.D. and Harsley, K. (2011) ‘Effect of woven fabric architecture on interlaminar mechanical response of composite materials: An experimental study’, Journal of Reinforced Plastics and Composites, 30(24), pp. 2003-2014. Available at: https://doi.org/10.1177/0731684411431118.
- Jeyaguru, S. et al. (2024) ‘Effect of various weaving architectures on mechanical, vibration and acoustic behavior of Kevlar-Hemp intra-ply hybrid composites’, Composites Part A: Applied Science and Manufacturing, 176, p. 107845. Available at: https://doi.org/https://doi.org/10.1016/j.compositesa.2023.107845.
- Ma, Zhenyu et al. (2023) ‘Effect of fabric structural stability on the tensile property of bidirectional angle-interlock woven composites’, International Journal of Damage Mechanics, 32(8), pp. 989-1007. Available at: https://doi.org/10.1177/10567895231181608.
- Schwaiger, M. et al. (2024) ‘Effect of different weft-knitted structures on the mechanical performance of bio-based flexible composites’, Composites Part C: Open Access, 13 (January), p. 100436. Available at: https://doi.org/10.1016/j.jcomc.2024.100436.
- Aruchamy, K. et al. (2023) ‘Influence of weave arrangements on mechanical characteristics of cotton and bamboo woven fabric reinforced composite laminates’, Journal of Reinforced Plastics and Composites, 42(15-16), pp. 776-789. Available at: https://doi.org/10.1177/07316844221140350.
- Kink, J. et al. (2023) ‘Structural Mechanics Analysis of Woven Web Reinforced Membranes in Proton Exchange Membrane Water Electrolysis’, Journal of The Electro-chemical Society, 170(11), p. 114513. Available at: https://doi.org/10.1149/1945-7111/ad0663.
- Kaewpirom, S. and Worrarat, C. (2014) ‘Preparation and properties of pineapple leaf fiber reinforced poly(lactic acid) green composites’, Fibers and Polymers, 15(7), pp. 1469-1477. Available at: https://doi.org/10.1007/s12221-014-1469-0.
- Kacem, M.A. et al. (2024) ‘Assessing Extraction Methods and Mechanical and Physicochemical Properties of Algerian Yucca Fibers for Sustainable Composite Reinforcement’, Macromolecular Materials and Engineering, 2400082, pp. 1-13. Available at: https://doi.org/10.1002/mame.202400082.
- Lotfi, A. et al. (2021) ‘Natural fiber – reinforced composites: A review on material, manufacturing, and machinability’, Journal of Thermoplastic Composite Materials, 34(2), pp. 238-284. Available at: https://doi.org/10.1177/0892705719844546.
- Aruchamy, K. et al. (2020) ‘Study on mechanical characteristics of woven cotton/bamboo hybrid reinforced composite laminates’, Journal of Materials Research and Technology, 9(1), pp. 718-726. Available at: https://doi.org/10.1016/j.jmrt.2019.11.013.
- Gao, X. et al. (2022) ‘Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: a review’, Journal of Materials Research and Technology, 19, pp. 1162-1190. Available at: https://doi.org/10.1016/j.jmrt.2022.05.077.
- S. Garriba, H. Siddhi Jailani, Extraction and characterization of natural cellulosic fiber from Mariscus ligularis plant as potential reinforcement in composites, Int. J. Biol. Macromol. 253 (2023) 127609. https://doi.org/https://doi.org/10.1016/j.ijbiomac.2023.127609.
- Storm, S.L.S. et al. (2024) ‘Investigation of native cellulose under high pressure using microfocused synchrotron radiation’, Cellulose, 31(5), pp. 2705-2712. Available at: https://doi.org/10.1007/s10570-023-05581-2.
- Nazir, M.H. et al. (2023) ‘The potential of adopting natural fibers reinforcements for fused deposition modeling: Characterization and implications’, Heliyon, 9(4), p. e15023. Available at: https://doi.org/10.1016/j.heliyon.2023.e15023.
- Wang, Y. et al. (2023) ‘Strain-induced crystallization behavior and tensile properties of natural rubber with different vulcanization bond types’, Polymer Testing, 129(September), p. 108289. Available at: https://doi.org/10.1016/j.polymertesting.2023.108289.