References
- Shabgard, M.R. and Khosrozadeh, B., (2016). Comparative study of adding nano powders in dielectric effects on outputs and surface integrity of Ti-6Al-4V alloy in Electrical Discharge Machining. Modares Mechanical Engineering, 16(2), pp. 41-50.
- Talla, G., Gangopadhyay, S. and Biswas, C.K., (2017). Influence of graphite powder mixed EDM on the surface integrity characteristics of Inconel 625. Particulate Science and Technology, 35(2), pp. 219-226.
- Talla, G., Gangopadhyay, S. and Biswas, C.K., (2018). Effect of impregnated powder materials on surface integrity aspects of Inconel 625 during electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(7), pp. 1259-1272.
- Singh, G., Sidhu, S.S., Bains, P.S. and Bhui, A.S., (2019). Surface evaluation of ED machined 316L stainless steel in TiO2 nano-powder mixed dielectric medium. Materials Today: Proceedings, 18, pp. 1297-1303.
- Sahu, D.R. and Mandal, A., (2020). Critical analysis of surface integrity parameters and dimensional accuracy in powder-mixed EDM. Materials and Manufacturing Processes, 35(4), pp. 430-441.
- Taherkhani, A., Ilani, M.A., Ebrahimi, F., Huu, P.N., Long, B.T., Van Dong, P., Tam, N.C., Minh, N.D. and Van Duc, N., (2021). Investigation of surface quality in Cost of Goods Manufactured (COGM) method of μ-Al2O3 Powder-Mixed-EDM process on machining of Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 116(5), pp. 1783-1799.
- Furutania, K., Saneto, A., Takezawa, H., Mohri, N. and Miyake, H., (2001). Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid. Precision Engineering, 25(2), pp. 138-144.
- Kumar, A., Maheshwari, S., Sharma, C. and Beri, N., 2012. Machining efficiency evaluation of cryogenically treated copper electrode in additive mixed EDM. Materials and Manufacturing Processes, 27(10), pp. 1051-1058.
- Zain, Z.M., Ndaliman, M.B., Khan, A.A. and Ali, M.Y., (2014). Improving micro-hardness of stainless steel through powder-mixed electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(18), pp. 3374-3380.
- Wang, J.L., Yang, H. and Li, M., (2014). Study on discharge parameters of surface strengthening with powder mixed near dry EDM for H13 steel. Applied Mechanics and Materials, 602, pp. 757-760.
- Kuppan, P., Narayanan, S., Oyyaravelu, R. and Balan, A.S.S., (2017). Performance evaluation of electrode materials in electric discharge deep hole drilling of Inconel 718 superalloy. Procedia engineering, 174, pp. 53-59.
- Hernández-Castillo, I., Sánchez-López, O., Lancho-Romero, G.A. and Castañeda-Roldán, C.H., (2018). An experimental study of surface roughness in electrical discharge machining of AISI 304 stainless steel. Ingenier í a e Investigaci ó n, 38(2), pp. 90-96.
- Jithin, S., Shetye, S.S., Rodrigues, J.J., Mhetre, K.S., Mastud, S.A. and Joshi, S.S., (2018). Analysis of electrical discharge texturing using different electrode materials. Advances in Materials and Processing Technologies, 4(3), pp. 466-479.
- Li, J.Z., Xiao, L., Wang, H., Yu, H.L. and Yu, Z.Y., (2013). Tool wear compensation in 3D micro EDM based on the scanned area. Precision Engineering, 37(3), pp.753-757.
- Muthuramalingam, T., (2019). Measuring the influence of discharge energy on white layer thickness in electrical discharge machining process. Measurement, 131, pp. 694-700.
- Singh, G., Bhui, A.S., Lamichhane, Y., Mukhiya, P., Kumar, P. and Thapa, B., (2019). Machining performance and influence of process parameters on stainless steel 316L using die-sinker EDM with Cu tool. Materials Today: Proceedings, 18, pp. 2468-2476.
- Xu, B., Chen, S.G., Liang, X., Lei, J.G., Shi, H.Y., Fu, L.Y., Yang, J., Peng, T.J., Zhao, H. and Zhu, L.K., (2020). Recast layer removal of 304 stainless steel by combining micro-EDM with negative polarity micro-EDM. The International Journal of Advanced Manufacturing Technology, 107, pp. 4713-4723.
- Razak, M.A., Abdul-Rani, A.M. and Nanimina, A.M., (2015). Improving EDM efficiency with silicon carbide powder-mixed dielectric fluid. International Journal of Materials, Mechanics and Manufacturing, 3(1), pp. 40-43.
- Singh, B., Kumar, J. and Kumar, S., (2017). Optimization and surface modification in electrical discharge machining of AA 6061/SiCp composite using Cu-W electrode. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231(3), pp. 332-348.
- Datta, S., Pratihar, D.K. and Bandyopadhyay, P.P., (2013). Modeling of plasma spray coating process using statistical regression analysis. The International Journal of Advanced Manufacturing Technology, 65, pp. 967-980.