References
- Kafuku, J.M., 2019. Factors for effective implementation of lean manufacturing practice in selected industries in Tanzania. Procedia Manufacturing, 33, pp. 351-358. [https://doi.org/10.1016/j.promfg.2019.04.043]
- Nakajima, S., 1988. Introduction to TPM: Total Productive Maintenance. Cambridge, Mass: Productivity Press.
- Junior, R.G.P., Inácio, R.H., da Silva, I.B., Hassui, A. and Barbosa, G.F., 2022. A novel framework for single-minute exchange of die (SMED) assisted by lean tools. International Journal of Advanced Manufacturing Technology. Volume 119, pp. 6469-6487 [https://doi.org/10.1007/s00170-021-08534-w]
- Liker, J.K., 2004. The Toyota Way: 14 Management Principles from the World’s Greatest Manufacturer. New York: McGraw-Hill. ISBN 0071392319.
- Frank, G., Sturgeon, T.J., Benitez, G.B., Marodin, G.A. and Ferreira e Cunha, S., 2025. How Lean and Industry 4.0 affect worker outcomes and operational performance: A quantitative assessment of competing models. International Journal of Production Economics, 279, 109475. [https://www.sciencedirect.com/science/article/pii/S0925527324003323]
- Jonsson, P. and Lesshammar, M., 1999. Evaluation and improvement of manufacturing performance measurement systems – the role of OEE. International Journal of Operations & Production Management, 19(1), pp. 55-78. [https://doi.org/10.1108/01443579910244223]
- Engelmann, B., Schmitt, S., Miller, E., Bräutigam, V. and Schmitt, J., 2020. Advances in machine learning detecting changeover processes in cyber physical production systems. Journal of Manufacturing and Materials Processing, Volume 4(4). [https://doi.org/10.3390/jmmp4040108]
- Kang, N., Zhao, C., Li, J. and Horst, J.A., 2016. A hierarchical structure of key performance indicators for operation management and continuous improvement in production systems. International Journal of Production Research, Volume 54(22), pp. 6333-6350. [https://doi.org/10.1080/00207543.2015.1136082]
- Muchiri, P. and Pintelon, L., 2008. Performance measurement using overall equipment effectiveness (OEE): literature review and practical application discussion. International Journal of Production Research, Volume 46(13), pp. 3517-3535. [https://doi.org/10.1080/00207540601142645]
- Becker, J.M.J., Borst, J. and van der Veen, A., 2015. Improving the overall equipment effectiveness in high-mix-low-volume manufacturing environments. CIRP Annals, 64, pp. 419-422. [https://doi.org/10.1016/j.cirp.2015.04.126]
- Bhade, S. and Hegde, S., 2020. Improvement of Overall Equipment Efficiency of Machine by SMED. Procedia Manufacturing, 24(2), pp. 463-472. [https://doi.org/10.1016/j.matpr.2020.04.298]
- Sousa, E., Silva, F.J.G., Ferreira, L.P., Pereira, M.T., Gouveia, R. and Silva, R.P., 2018. Applying SMED methodology in cork stoppers production. Procedia Manufacturing, 17, pp. 611-622. [https://doi.org/10.1016/j.promfg.2018.10.103]
- Rosa, C., Silva, F.J.G., Ferreira, L.P. and Campilho, R., 2017. SMED methodology: the reduction of setup times for Steel Wire-Rope assembly lines in the automotive industry. Procedia Manufacturing, 13, pp. 1034-1042. [https://doi.org/10.1016/j.promfg.2017.09.110]
- Antoniolli, I., Guariente, P., Pereira, T., Ferreira, L.P. and Silva, F.J.G., 2017. Standardization and optimization of an automotive components production line. Procedia Manufacturing, 13, pp. 1120-1127. [https://doi.org/10.1016/j.promfg.2017.09.173]
- Vieira, A.M., Silva, F.J.G., Campilho, R.D.S.G., Ferreira, L.P., Sá, J.C. and Pereira, T., 2020. SMED methodology applied to the deep drawing process in the automotive industry. Procedia Manufacturing, 51, pp. 1416-1422. [https://doi.org/10.1016/j.promfg.2020.10.197]
- Ferradás, P.G. and Salonitis, K., 2013. Improving changeover time: A tailored SMED approach for welding cells. Procedia CIRP, 7, pp. 598-603. [https://doi.org/10.1016/j.procir.2013.06.039]
- Antosz, K. and Pacana, A., 2018. Comparative analysis of the implementation of the SMED method on selected production stands. Technical Gazette, 25(Suppl. 2), pp. 276-282. [https://doi.org/10.17559/TV-20160411095705]
- Khakpour, R., Ebrahimi, A. And Seyed-Hosseini, S.-M., 2024. “SMED 4.0: a development of single minute exchange of die in the era of Industry 4.0 technologies to improve sustainability. Journal of Manufacturing Technology Management, Vol. 35 No. 3, pp. 568-589. [https://doi.org/10.1108/JMTM-08-2023-0333]
- Komendák, M., 2024. Application of the SMED Method to Improve the Efficiency of Production Equipment Changeovers: Master’s Thesis. Zvolen: Technical University in Zvolen, Faculty of Technology.
- IPA Slovakia, 2017. SMED. Blog article, 24 February. Available at: https://www.ipaslovakia.sk/clanok/smed [Accessed 29 April 2023].
- Boledovič, L., 2017. PDCA Cycle. Blog article, 25 February. Available at: https://www.ipaslovakia.sk/clanok/pdca-cyklus [Accessed 29 January 2024].
- Burieta, J., 2017. 5S Method – Standardisation and Visualisation. Blog article, 25 February. Available at: https://www.ipaslovakia.sk/clanok/5s-metoda [Accessed 29 April 2023].
- LeanProduction, 2024. Lean Manufacturing. [online] Available at: https://www.leanproduction.com/ [Accessed 3 March 2024].