Have a personal or library account? Click to login
Experimental Investigation of Manufacturing Variables Effect on Electrical Discharge Machining of Titanium Alloy Cover

Experimental Investigation of Manufacturing Variables Effect on Electrical Discharge Machining of Titanium Alloy

Management Systems in Production Engineering
Volume 33 (2025): Issue 2 (June 2025)
By: Abass Enzi,  Ahmed Ghazi Abdulameer,  Omar Hashim Hassoon and  Abdallah Hamieh  
Open Access
|Apr 2025

References

  1. Singh, N. Bharti, P.S. 2020. A review on micro electric discharge machining of titanium alloys. Materials Today: Proceedings, 25, pp.742-750.
    Search in Google ScholarBack to article
  2. Inagaki, I., Takechi, T., Shirai, Y. Ariyasu, N. 2014. Application and features of titanium for the aerospace industry. Nippon steel & sumitomo metal technical report, 106(106), pp. 22-27.
    Search in Google ScholarBack to article
  3. Pujari, S.R., Koona, R. Beela, S. 2018. Surface integrity of wire EDMed aluminum alloy: A comprehensive experimental investigation. Journal of King Saud University-Engineering Sciences, 30(4), pp. 368-376.
    Search in Google ScholarBack to article
  4. Sakthivel, G., Saravanakumar, D. Muthuramalingam, T. 2018. Application of failure mode and effect analysis in manufacturing industry-an integrated approach with FAHP-fuzzy TOPSIS and FAHP-fuzzy VIKOR. International Journal of Productivity and Quality Management, 24(3), pp. 398-423.
    Search in Google ScholarBack to article
  5. Schmid, S.R. Kalpakjian, S. 2014. Manufacturing engineering and technology. Pearson Prentice Hall.
    Search in Google ScholarBack to article
  6. Pramanik, A., Basak, A.K., Littlefair, G., Debnath, S., Prakash, C., Singh, M.A., Marla, D. Singh, R.K. 2020. Methods and variables in Electrical discharge machining of titanium alloy – A review. Heliyon, 6(12), pp. 1-15.
    Search in Google ScholarBack to article
  7. Qudeiri, J.E.A., Zaiout, A., Mourad, A.H.I., Abidi, M.H. Elka-seer, A. 2020. Principles and characteristics of different EDM processes in machining tool and die steels. Applied sciences, 10(6), p.2082.
    Search in Google ScholarBack to article
  8. Asif, N., Saleem, M.Q. Farooq, M.U. 2023. Performance evaluation of surfactant mixed dielectric and process optimization for electrical discharge machining of titanium alloy Ti6Al4V. CIRP Journal of Manufacturing Science and Technology, 43, pp.42-56.
    Search in Google ScholarBack to article
  9. Mahapatra, K.K., Biswal, S., Tripathy, S., Thatoi, D.N. Satapathy, P. 2022, August. Optimization of EDM Process Parameters in Machining of Titanium Alloy Used for Aerospace Applications. In International Conference on Recent Advances in Mechanical Engineering Research and Development. Singapore: Springer Nature Singapore, pp. 163-172.
    Search in Google ScholarBack to article
  10. Thakur, A., Rao, P.S. Khan, M.Y. 2021. Study and optimization of surface roughness parameter during electrical discharge machining of titanium alloy (Ti-6246). Materials Today: Proceedings, 44, pp. 838-847.
    Search in Google ScholarBack to article
  11. Nagaraju, N., Prakash, R.S., Kumar, G.V.A. Ujwala, N.G. 2020. Optimization of electrical discharge machining process parameters for 17-7 PH stainless steel by using taguchi technique. Materials Today: Proceedings, 24, pp.1541-1551.
    Search in Google ScholarBack to article
  12. Ahmed, N., Ishfaq, K., Moiduddin, K., Ali, R. Al-Shammary, N. 2019. Machinability of titanium alloy through electric discharge machining. Materials and Manufacturing Processes, 34(1), pp. 93-102.
    Search in Google ScholarBack to article
  13. Kalaiarasi, K., Senthilkumar, C., Balamurugan, M. Arokia-Dass, R. 2022. Micro-electrical discharge machining of Titanium alloy (Ti-6Al-4V) by Sawtooth pulse current. International Journal of Electrochemical Science, 17(4), p. 220442.
    Search in Google ScholarBack to article
  14. Xie, B.C., Wang, Y.K., Wang, Z.L. Zhao, W.S. 2011. Numerical simulation of titanium alloy machining in electric discharge machining process. Transactions of Nonferrous Metals Society of China, 21, pp. s434-s439.
    Search in Google ScholarBack to article
  15. Kumar, P.M., Sivakumar, K. Selvarajan, L. 2024. EDM machining effectiveness for Ti-6Al-4V alloy using Cu-TiB2 ceramic composite electrode: a parametric evaluation. Ceramics International, 50(11), pp. 20118-20132.
    Search in Google ScholarBack to article
  16. Baroi, B.K. Patowari, P.K. 2022. Parametric study of electric discharge machining of titanium grade 2 alloy in distilled water. Materials Today: Proceedings, 59, pp. 1584-1590.
    Search in Google ScholarBack to article
  17. Ishfaq, K. Waseem, M.U. 2023. Cutting performance evaluation of modified dielectrics in nano powder mixed electric discharge machining (NPMEDM) of Ni-based super alloy. CIRP Journal of Manufacturing Science and Technology, 41, pp. 196-215.
    Search in Google ScholarBack to article
  18. Choudhary, R., Kumar, A., Yadav, G., Yadav, R., Kumar, V. Akhtar, J. 2020. Analysis of cryogenic tool wear during electrical discharge machining of titanium alloy grade 5. Materials Today: Proceedings, 26, pp. 864-870.
    Search in Google ScholarBack to article
  19. Singh, N.K., Singh, Y. Sharma, A. 2021. Experimental investigation of flushing approaches on EDM machinability during machining of titanium alloy. Materials Today: Proceedings, 38, pp. 139-145.
    Search in Google ScholarBack to article
  20. Gautam, N., Goyal, A. Sharma, S.S., Oza, A.D. Kumar, R. 2022. Study of various optimization techniques for electric discharge machining and electrochemical machining processes. Materials Today: Proceedings, 57, pp.615-621.
    Search in Google ScholarBack to article
  21. Kumar, S. Gupta, T. 2023. A review of electrical discharge machining (EDM) and its optimization techniques. Materials Today: Proceedings.
    Search in Google ScholarBack to article
  22. Kumar, R., Roy, S., Gunjan, P., Sahoo, A., Sarkar, D.D. Das, R.K. 2018. Analysis of MRR and surface roughness in machining Ti-6Al-4V ELI titanium alloy using EDM process. Procedia Manufacturing, 20, pp. 358-364.
    Search in Google ScholarBack to article
  23. Rouniyar, A.K. Shandilya, P. 2018. Multi-Objective optimization using Taguchi and grey relational analysis on machining of Ti-6Al-4V alloy by powder mixed EDM process. Materials Today: Proceedings, 5(11), pp. 23779-23788.
    Search in Google ScholarBack to article
  24. Panda, S.N., Pattanaik, A.K., Patel, A.K., Nayak, S., Patra, P. Bagal, D.K. 2023. Process parameter optimization for machining of Ti-6Al-4V using WASPAS and multi-objective genetic algorithm along with exponential trend line analysis. Materials Today: Proceedings.
    Search in Google ScholarBack to article
  25. Gugulothu, B., Rao, G.K.M., Rao, D.H., Kumsa, D.K. Kassa, M.B. 2021. Experimental results on EDM of Ti-6Al-4V in drinking water with Graphite powder concentration. Materials Today: Proceedings, 46, pp. 234-242.
    Search in Google ScholarBack to article
  26. Gugulothu, B., Rao, G.K.M. Bezabih, M. 2021. Grey relational analysis for multi-response optimization of process parameters in green electrical discharge machining of Ti-6Al-4V alloy. Materials Today: Proceedings, 46, pp. 89-98.
    Search in Google ScholarBack to article
  27. Agarwal, N., Irshad, M., Singh, M.R. Singh, G. 2022. Optimization of material removal rate of Ti-6Al-4V using Rao-1 algorithm. Materials Today: Proceedings, 62, pp. 6722-6726.
    Search in Google ScholarBack to article
  28. Phani, K.V.S., Mishra, S.B., Nayak, S.K., Satpathy, M.P., Das, D.K. Nanda, B.K. 2023. Multi objective optimization of EDM process parameters for HCHCr steel. Materials Today: Proceedings.
    Search in Google ScholarBack to article
  29. Verma, V. Sahu, R. 2017. Process parameter optimization of die-sinking EDM on Titanium grade – V alloy (Ti-6Al-4V) using full factorial design approach. Materials today: proceedings, 4(2), pp. 1893-1899.
    Search in Google ScholarBack to article
  30. Verma, V. Sajeevan, R. 2015. Multi process parameter optimization of diesinking EDM on titanium alloy (Ti6-Al4-V) using Taguchi approach. Materials Today: Proceedings, 2(4-5), pp. 2581-2587.
    Search in Google ScholarBack to article
  31. Agarwal, N., Singh, M.R., Singh, G. Yadav, R. 2023. Optimization of EDM parameters using Ananya algorithm: A new advanced optimization technique. Materials Today: Proceedings.
    Search in Google ScholarBack to article
  32. Bhowmick, S., Mondal, R., Sarkar, S., Biswas, N., De, J. Majumdar, G. 2023. Parametric optimization and prediction of MRR and surface roughness of titanium mixed EDM for Inconel 718 using RSM and fuzzy logic. CIRP Journal of Manufacturing Science and Technology, 40, pp. 10-28.
    Search in Google ScholarBack to article
  33. Kumar, A., Vivekananda, K. Prasad, A.R. 2022. Experimental investigation and parametric optimization during EDM of Titanium grade 9 using MOORA-fuzzy integrated multi-objective Genetic algorithm. Materials Today: Proceedings, 62, pp. 4473-4479.
    Search in Google ScholarBack to article
  34. Singh, S.K., Prabhakar, S., Rao, D.K. Khare, S.K. 2022. Optimization of Machining parameters in EDM of Ti6-Al-4V alloy using Taguchi Grey relational analysis Methodology. Materials Today: Proceedings, 59, pp. 1231-1235.
    Search in Google ScholarBack to article
  35. Singh, R., Singh, R.P. Trehan, R. 2022. Machine learning algorithms based advanced optimization of EDM parameters: An experimental investigation into shape memory alloys. Sensors International, 3, pp. 100179.
    Search in Google ScholarBack to article
  36. Dikshit, M.K., Singh, S., Pathak, V.K., Saxena, K.K., Agrawal, M.K., Malik, V., Hazim Salem, K. Khan, M.I. 2023. Surface characteristics optimization of biocompatible Ti6Al4V with RCCD and NSGA II using die sinking EDM. Journal of Materials Research and Technology, 24, pp. 223-235.
    Search in Google ScholarBack to article
  37. Gangil, M. Pradhan, M.K. 2017. Modeling and optimization of electrical discharge machining process using RSM: A review. Materials Today: Proceedings, 4(2), pp. 1752-1761.
    Search in Google ScholarBack to article
  38. Hasda, R.K. 2013. Optimization of EDM Process Parameters through Teaching Learning Based Optimization Algorithm (Master thesis).
    Search in Google ScholarBack to article
  39. Singh, N.K., Singh, Y. Sharma, A. 2021. Experimental investigation of flushing approaches on EDM machinability during machining of titanium alloy. Materials Today: Proceedings, 38, pp. 139-145.
    Search in Google ScholarBack to article
  40. Jayaraman, P., Mahesh, L. Senthil, V. 2015. Optimization of cutting parameters in turning of AA6351 using response surface methodology and genetic algorithm. IJAER, 10(23), pp. 43905-43911.
    Search in Google ScholarBack to article
  41. Rudrapati, R., Sahoo, P. Bandyopadhyay, A. 2016, September. Optimization of process parameters in CNC turning of aluminium alloy using hybrid RSM cum TLBO approach. In IOP conference series: materials science and engineering, 149(1), pp. 012039.
    Search in Google ScholarBack to article
  42. Enzi, A. Mynderse, J.A. 2017, November. Optimization of process parameters applied to a prototype selective laser sintering system. In ASME International Mechanical Engineering Congress and Exposition, (58356), p. V002T02A022.
    Search in Google ScholarBack to article
  43. Myers, R.H., Montgomery, D.C. and Anderson-Cook, C.M. 2016. Response surface methodology: process and product optimization using designed experiments. John Wiley & Sons.
    Search in Google ScholarBack to article
  44. Sathiyaraj, S., Prabhuraj, P. Sai, S. 2015. Investigation of machining characteristics of tungsten carbide by wire cut EDM process. J. Chem. Pharm. Sci. (9), pp. 65-71.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2025-0019 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 202 - 211
Submitted on: Oct 1, 2024
|
Accepted on: Apr 1, 2025
|
Published on: Apr 27, 2025
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
electrical discharge machining,
machining parameters,
titanium alloy ti-6al-4v,
response surface methodology,
data analysis
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2025 Abass Enzi, Ahmed Ghazi Abdulameer, Omar Hashim Hassoon, Abdallah Hamieh, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 33 (2025): Issue 2 (June 2025)Next article