Have a personal or library account? Click to login

Comparison Between Low-Carbon Steel and Galvanized Steel by Deep Drawing Under the Influence of Different Parameters

Management Systems in Production Engineering
Volume 33 (2025): Issue 2 (June 2025)
By:
Open Access
|Apr 2025

References

  1. P. Arora. D. Tyagi. “A Survey on Formability of Material and Effects during Deep Drawing Process.” International Journal of Engineering Research in Current Trends. vol. 3. no. 4. pp. 55-58. 2021.
    Search in Google ScholarBack to article
  2. G. Ramesh. G. Chandra. M. Reddy. “Analysis of Optimization of Blank Holding Force In Deep Drawing By Using LS DYNA.” IJERA. vol. 3. no. 4. pp. 1975-1995. 2013.
    Search in Google ScholarBack to article
  3. Y.N. Dhulugade. P.N. Gore. “Design and development of sheet metal draw component using CAE technology.” International Journal of Emerging Technology and Advanced Engineering. vol. 3. no. 3. pp. 30-39. 2013.
    Search in Google ScholarBack to article
  4. M. Kadkhodayana. E. Afshin. “Thinning behavior of laminated sheets metal in warm deep-drawing process under various grain sizes.” MATEC Web of Conferences 80, pp. 1-8. 2016. doi: 10.1051/matecconf/20168015001.
    Search in Google ScholarBack to article
  5. P. Różyło. Ł, Wójcik. “FEM and Experimental Based Analysis of the Stamping Process of Aluminum Alloy,” Advances in Science and Technology Research Journal. vol. 11, no. 3, pp. 94-101. 2017. doi:10.12913/22998624/70691.
    Search in Google ScholarBack to article
  6. W.K. Jawad. A.S. Jaafar. “The influence of punch profile radius on the deep-drawing process in case of a low carbon steel cylindrical cup.” Engineering and Technology Journal. vol. 36 no. A. pp. 1048-9401. 2018.
    Search in Google ScholarBack to article
  7. M. Kardan. A, Parvizi. A. Askari. “Experimental and finite element results for optimization of punch force and thickness distribution in the deep drawing process.” Arabian Journal for Science and Engineering 43. pp. 1165-1175. 2018.
    Search in Google ScholarBack to article
  8. D. Kumaravel. K. Venkatesh. “Reduction of Wrinkling Defect in Deep Drawing Process”. Advances in Manufacturing Processes: Select Proceedings of ICEM. Springer Singapore. 2019.
    Search in Google ScholarBack to article
  9. A.I. Mohammed. “Analysis of Forming Complex Cup by Drawing Process.” Materials Science and Engineering. 881. 2020.
    Search in Google ScholarBack to article
  10. J. Jweeg. I. Mohammed. S Jabbar. “Investigation of Thickness Distribution Variation in Deep Drawing of Conical Steel Products”. Engineering and Technology Journal, vol. 39. no. 4. pp. 586-598. 2021.
    Search in Google ScholarBack to article
  11. M. Ken-ichi. K. Soeda. A Shibata. “Effects of Variable Punch Speed and Blank Holder Force in Warm Superplastic Deep Drawing Process.” Metals. V11. 493. 2021.
    Search in Google ScholarBack to article
  12. S. Hashemi. A. Roohi. “Minimizing spring-back and thinning in deep drawing process of St14 steel sheets.” International Journal on Interactive Design and Manufacturing (IJIDeM). vol. 16. no. 1 pp. 381-388. 2022.
    Search in Google ScholarBack to article
  13. B. Jayabalu. G. Devairakkam. Prashanth. K. Scidarth. “Effect on the product finish in deep drawing process due to supremacy of punch force.” Journal of Physics: Conference Series. vol. 2272. no. 1. IOP Publishing. 2022.
    Search in Google ScholarBack to article
  14. B. Anand. R. Golden. R. Nimal. R. Mahendran. R, Sabarish “Experimental validation of IS2062 deep drawing component.” Materials Today: Proceedings. 2023.
    Search in Google ScholarBack to article
  15. B. Vijayamohan. Gideon, Devairakkam. S. Babu, K. Scidarth. “Effect on deep drawing due to change in sheet metal thickness.” AIP Conference Proceedings. vol. 2813. no. 1. AIP Publishing. 2023.
    Search in Google ScholarBack to article
  16. R. Wójcik, “FEM and Experimental Based Analysis of the Stamping Process of Aluminum Alloy,” Advances in Science and Technology Research Journal. vol. 11, no. 3 pp. 94-101, 2017. doi:10.12913/22998624/70691.
    Search in Google ScholarBack to article
  17. A. Mohammed. W. Jawad. “Experimental and theoretical investigations of octagonal shapes using multi-stage deep drawing process.” AIP Conference Proceedings. vol. 2977. no. 1. AIP Publishing. 2023. https://doi.org/10.1063/5.0182292.
    Search in Google ScholarBack to article
  18. S. Alexander, Š.P. Brusilová and G. Zuzana. “Simulation Process Deep Drawing of Tailor Welded Blanks DP600 and BH220 Materials in Tool With Elastic Blankholder”. Strojnícky časopis – Journal of Mechanical Engineering. vol. 68. no. 1. pp. 95-102. 2018. https://doi.org/10.2478/scjme-2018-0010.
    Search in Google ScholarBack to article
  19. N. Martin. M. Václav. Štefan. “Determination of the Coefficient of Friction Under Cold Tube Drawing Using FEM Simulation and Drawing Force Measurement.” Research Papers Faculty of Materials Science and Technology Slovak University of Technology. vol. 26. no. 42. pp. 29-34. 2018. https://doi.org/10.2478/rput-2018-0003.
    Search in Google ScholarBack to article
  20. N. Vasile. B.GM. Silvia. “EFG Method Used in Deep Drawing Numerical Simulation.” International Conference Knowledge-Based Organization. vol. 26. no. 3. pp. 136-143. 2020. https://doi.org/10.2478/kbo-2020-0128.
    Search in Google ScholarBack to article
  21. N. Eugen-Vlad. “Simulating Water Flow Through a Hydraulic Channel Using Ansys.” Bulletin of the Polytechnic Institute of Iași. Machine constructions Section. vol. 68. no. 4. pp. 41-46. 2022. https://doi.org/10.2478/bipcm-2022-0034.
    Search in Google ScholarBack to article
  22. A. Bedan. A. Shabeeb. H. Hussein. “Improve Single Point Incremental Forming Process Performance Using Primary Stretching Forming Process”. Advances in Science and Technology Research Journal. vol. 17. no. 5. pp. 260-268. 2023. https://doi.org/10.12913/22998624/172907.
    Search in Google ScholarBack to article
  23. Abdullah, Mostafa A., T.F. Abbas, “Numerical Developing the Internet of Things To Remotely Monitor the Performance of a Three Dimensions Printer for Free-Form Surface,” J. Eng. Sci. Technol., vol. 18, no. 6, pp. 2809-2822, 2023. DOI:10.18517/ijaseit.14.2.19863
    Search in Google ScholarBack to article
  24. Ghazi, S.K., Abdullah, M.A. and Abdulridha, H.H. 2025. Investigating the Impact of EDM Parameters on Surface Roughness and Electrode Wear Rate in 7024 Aluminum Alloy. Engineering, Technology & Applied Science Research. 15, 1 (Feb. 2025), pp. 19401-19407. https://doi.org/10.48084/etasr.9252.
    Search in Google ScholarBack to article
  25. Abdullah, M.A., Ahmed, B.A. and Ghazi, S.K. 2024. Enhancing of Material Removal Rate and Surface Roughness in Wire EDM Process using Grey Relational Analysis. Engineering, Technology & Applied Science Research. 14, 5 (Oct. 2024), pp. 17422-17427. https://doi.org/10.48084/etasr.8450
    Search in Google ScholarBack to article
  26. H. Kim. Ji H. Sung. R. Sivakumar. T. Altan. “Evaluation of stamping lubricants using the deep drawing test.” International Journal of Machine Tools & Manufacture. vol. 47. pp. 2120-2132. 2007.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2025-0016 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 163 - 170
Submitted on: Jul 1, 2024
Accepted on: Apr 1, 2025
Published on: Apr 27, 2025
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
thickness distribution,
the radius of the die,
velocity,
the thickness of the sheet,
low-carbon steel,
and galvanized steel
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2025 Mostafa Adel Abdullah, Aseel Hamad Abed, Khalida Kadhim Mansor, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Volume 33 (2025): Issue 2 (June 2025)Next article