Have a personal or library account? Click to login

Effect of Hybrid Composite Electrode (Cu/Cr/Wc/Ag) on Surface Integrity of Stainless Steel 304l Machined by EDM

Management Systems in Production Engineering
Volume 33 (2025): Issue 1 (March 2025)
By:
Open Access
|Feb 2025

References

  1. N. Mohri, T. Tani. Recent evolution of electrical discharge machining. In: Menz W, Dimov S, Fillon BBT-4M 2006-SIC on M-MMM, editors. Oxford: Elsevier; 2006. p. 23–6. Available from: https://www.sciencedirect.com/science/article/pii/B9780080452630500064
    Search in Google ScholarBack to article
  2. Y. Laibi, S. Shather. Effect of SiC-Cu Electrode on Material Removal Rate, Tool Wear and Surface Roughness in EDM Process. Eng Technol J. 2020; 38(9):1406–13.
    Search in Google ScholarBack to article
  3. H. El-Hofy. Advanced machining processes: nontraditional and hybrid machining processes. McGraw-Hil. McGraw-Hill Professional. New York; 2005. 115–140 p.
    Search in Google ScholarBack to article
  4. S. Anjum, M. Shah, N.A. Anjum, S. Mehmood, W. Anwar, “Machining and Surface Characteristics of AISI 304L After Electric Discharge Machining for Copper and Graphite Electrodes in Different Dielectric Liquids,” Eng. Technol. Appl. Sci. Res., vol. 7, no. 4, pp. 1765–1770, 2017, doi: 10.48084/etasr.1250.
    Search in Google ScholarBack to article
  5. A.A. Khleifa, O.S. Sabbar. Electrode Wear Evaluation in E.D.M Process. Eng Technol J [Internet]. 2019; 37(2C):252–7. Available from: https://etj.uotechnology.edu.iq/article_168971.html
    Search in Google ScholarBack to article
  6. Z. Gulbinowicz, O. Goroch, P. Skoczylas. Mathematical Modeling of Material Erosion During the Electrical Discharge. Adv Sci Technol Res J. 2020; 14(2):27–33.
    Search in Google ScholarBack to article
  7. J.E. Abu Qudeiri, A. Ziout, A-H. Mourad, M. Abidi, A. Elkaseer. Principles and Characteristics of Different EDM Processes in Machining Tool and Die Steels. Appl Sci. 2020 Mar 19; 10:2082.
    Search in Google ScholarBack to article
  8. J. Rajaguru, P. Kumar, N. Arunachalam. Novel carbon nanotubes reinforced copper composite electrode for improved performance of electric discharge machining. Mater Lett [Internet]. 2022; 307:131063. Available from:https://www.sciencedirect.com/science/article/pii/S0167577X21017614
    Search in Google ScholarBack to article
  9. S. Shather, A. Ibrahim, Z. Mohsein, O. Hassoon. Enhancement of EDM Performance by Using Copper-Silver Composite Electrode. Eng Technol J. 2020; 38(9):1352–8.
    Search in Google ScholarBack to article
  10. N. Beri, S. Maheshwari, C. Sharma, A. Kumar. Surface Quality Modification Using Powder Metallurgy Processed CuW Electrode During Electric Discharge Machining of Inconel 718. Procedia Mater Sci. 2014; 5:2629–34.
    Search in Google ScholarBack to article
  11. P. Balasubramanian, T. Senthilvelan. Optimization of Machining Parameters in EDM Process Using Cast and Sintered Copper Electrodes. Procedia Mater Sci [Internet]. 2014; 6(Icmpc):1292–302. Available from: http://dx.doi.org/10.1016/j.mspro.2014.07.108
    Search in Google ScholarBack to article
  12. Narinder Singh Jassal Sanjeev Verma Kashidas Chattopadhyay B.S. Pabla. Surface Modification of Aluminium Using Pm Electrode on Edm. Adv Mater Manuf Technol. 2015; 4(2277):91–5.
    Search in Google ScholarBack to article
  13. S. Kumar, A. Batish, R. Singh, A. Bhattacharya. Effect of cryogenically treated copper-tungsten electrode on tool wear rate during electro-discharge machining of Ti-5Al-2.5Sn alloy. Wear [Internet]. 2017; 386–387:223–9. Available from: https://www.sciencedirect.com/science/article/pii/S0043164817301850
    Search in Google ScholarBack to article
  14. L. Li, L. Feng, X. Bai, Li ZY. Surface characteristics of Ti-6Al-4V alloy by EDM with Cu-SiC composite electrode. Appl Surf Sci [Internet]. 2016; 388:546-50. Available from:https://www.sciencedirect.com/science/article/pii/S0169433215025647
    Search in Google ScholarBack to article
  15. M. Piyar Uddin, A. Majumder, J. Deb Barma, P. Kumar. Study of the performance of Cu-Gr composite tool during EDM of AISI 1020 mild steel. Mater Today Proc [Internet]. 2022; 62:3886–90. Available from: https://www.sciencedirect.com/science/article/pii/S2214785322027171
    Search in Google ScholarBack to article
  16. V.R. Chundru, R. Koona, S.R. Pujari. Surface Modification of Ti6Al4V Alloy Using EDMed Electrode Made with Nano- and Micron-Sized TiC/Cu Powder Particles. Arab J Sci Eng [Internet]. 2019; 44(2):1425–36. Available from: https://doi.org/10.1007/s13369-018-3561-z
    Search in Google ScholarBack to article
  17. R. Çakıroğlu, M. Günay, “Comprehensive analysis of material removal rate, tool wear and surface roughness in electrical discharge turning of L2 tool steel,” J. Mater. Res. Technol., vol. 9, no. 4, pp. 7305–7317, 2020, doi: https://doi.org/10.1016/j.jmrt.2020.04.060.
    Search in Google ScholarBack to article
  18. S.K. Shather, S.H. Aghdeab, W.S. Khudhier. Enhancement the Thermal Effects Produce by EDM Using Hybrid Machining. In: IOP Conference Series: Materials Science and Engineering. 2019.
    Search in Google ScholarBack to article
  19. M.J. Islam, Y. Zhang, L. Zhao, W. Yang, H. Bian. Material wear of the tool electrode and metal workpiece in electrochemical discharge machining. Wear [Internet]. 2022; 500–501:204346. Available from: https://www.sciencedirect.com/science/article/pii/S0043164822001107
    Search in Google ScholarBack to article
  20. R. Arshad, S. Mehmood, M. Shah, M. Imran, F. Qayyum. Effect of Distilled Water and Kerosene as Dielectrics on Machining Rate and Surface Morphology of Al-6061 During Electricdischarge Machining. Adv Sci Technol Res J. 2019;13(3):162–9.
    Search in Google ScholarBack to article
  21. A. Alinaghizadeh, M. Hadad, and B. Azarhoushang, “Experimental Study of the Surface Quality of Form-Cutting Tools Manufactured via Wire Electrical Discharge Machining Using Different Process Parameters,” 2023.
    Search in Google ScholarBack to article
  22. V. Lalwani, P. Sharma, C.I. Pruncu, and D.R. Unune, “Response surface methodology and artificial neural network-based models for predicting performance of wire electrical discharge machining of inconel 718 alloy,” J. Manuf. Mater. Process., vol. 4, no. 2, 2020, doi: 10.3390/jmmp4020044.
    Search in Google ScholarBack to article
  23. X. Zhang, M. He, Y. Zhan, W. Yang, K. Wu. Microstructure, Mechanical and Electrical Properties of Hybrid Copper Matrix Composites with Fe Microspheres and rGO Nanosheets. Molecules. 2022;27(19).
    Search in Google ScholarBack to article
  24. S.K. Rajiv, “Parametric optimization of process parameters for Electric discharge Machining of Tungsten carbide (93% WC and 7%Co),” Prod. Eng. Arch., vol. 26, no. 4, pp. 154–161, 2020, doi: 10.30657/pea.2020.26.28.
    Search in Google ScholarBack to article
  25. M.A. Younis, M.S. Abbas, M.A. Gouda, F.H. Mahmoud, and S.A. Abd Allah, “Effect of electrode material on electrical discharge machining of tool steel surface,” Ain Shams Eng. J., vol. 6, no. 3, pp. 977–986, 2015, doi: https://doi.org/10.1016/j.asej.2015.02.001.
    Search in Google ScholarBack to article
  26. D. Doreswamy et al., “Optimization and modeling of material removal rate in wire-edm of silicon particle reinforced al6061 composite,” Materials (Basel)., vol. 14, no. 21, pp. 1–18, 2021, doi: 10.3390/ma14216420.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/mspe-2025-0014 | Journal eISSN: 2450-5781 | Journal ISSN: 2299-0461
Journal RSS Feed
Language: English
Page range: 136 - 143
Submitted on: Mar 1, 2024
Accepted on: Jan 1, 2025
Published on: Feb 17, 2025
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Keywords:
Stir Casting process,
Surface roughness,
Tool Wear Rate,
Electrical Discharge Machining,
Composite Electrode,
Material removal rate
Related subjects:
Business and economics,
Business management,
Management accounting, financial controlling, cost calculation, investment,
Engineering,
Mechanical engineering,
Production technology,
Tools and methods,
Process engineering and industrial engineering

© 2025 Ahmed Basil Abdulwahhab, Abbas F. Ibrahim, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.

Previous articleVolume 33 (2025): Issue 1 (March 2025)Next article