Out-Of-Position Bead Geometry Prediction in Wire Arc Additive Manufacturing (WAAM) Using Fuzzy Logic-Based System
By:
References
- S. Pattanayak, S.K. Sahoo, “Gas metal arc welding based additive manufacturing – a review,” CIRP Journal of Manufacturing Science and Technology, vol. 33, pp. 398–442, 2021.
- BS EN ISO/ASTM 52900:2017 Additive Manufacturing – General Principles – Terminology, BSI Standards Publication, 2017.
- C.R. Cunningham, J.M. Flynn, A. Shokrani, V. Dhokia, S.T. Newman, “Invited review article: Strategies and processes for high quality wire arc additive manufacturing,” Additive Manufacturing, vol. 22, pp. 672–686, 2018.
- L.P. Raut, R.V. Taiwade, “Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions,” Journal of Materials Engineering and Performance, vol. 30, pp. 4768–4791, 2021.
- M. Chaturvedi, E. Scutelnicu, C.C. Rusu, L.R. Mistodie, D. Mihailescu, A.V. Subbiah, “Wire Arc Additive Manufacturing: Review on Recent Findings and Challenges in Industrial Applications and Materials Characterization,” Metals, vol. 11, no. 6, p. 939, 2021.
- V.T. Le, D.S. Mai, T.K. Doan, H. Paris, “Wire and arc additive manufacturing of 308L stainless steel components: Optimization of processing parameters and material properties,” Engineering Science and Technology, an International Journal, vol. 24, no. 4, pp. 1015–1026, 2021.
- K.S. Derekar, “A review of wire arc additive manufacturing and advances in wire arc additive manufacturing of aluminium,” Materials Science and Technology, vol. 34, pp. 895–916, 2018.
- K. Treutler, V. Wesling, “The Current State of Research of Wire Arc Additive,” Applied Sciences, vol. 11, no. 18, p. 8619, 2021.
- B.A. Szost, S. Terzi, F. Martina, D. Boisselier, A. Prytuliak, T. Pirling, M. Hofmann, D.J. Jarvis, “A comparative study of additive manufacturing techniques: Residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4V components,” Materials & Design, vol. 89, pp. 559–567, 2016.
- T.A. Rodrigues, V. Duarte, R.M. Miranda, T.G. Santos, J.P. Oliveira, “Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM),” Materials, vol. 12, no. 7, p. 1121, 2019.
- X. Chen, F. Kong, Y. Fu, X. Zhao, R. Li, G. Wang, H. Zhang, “A review on wire-arc additive manufacturing: typical defects, detection approaches, and multisensor data fusion-based model,” The International Journal of Advanced Manufacturing Technology, vol. 117, pp. 707–727, 2021.
- P. Wang, S. Hu, J. Shen, Y. Liang, “Characterization the contribution and limitation of the characteristic processing parameters in cold metal transfer deposition of an Al alloy,” Journal of Materials Processing Technology, vol. 245, pp. 122–133, 2017.
- B. Tomar, S. Shiva, “Cold metal transfer-based wire arc additive manufacturing,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 45, no. 3, p. 157, 2023.
- S. Selvi, A. Vishvaksenan, E. Rajasekar, “Cold metal transfer (CMT) technology – An overview,” Defence Technology, vol. 14, p. 28e44, 2018.
- D. Ding, Z. Pan, D. Cuiuri, H. Li, S. Duin, N. Larkin, “Bead modelling and Implementation of adaptive MAT path in wire and arc additive manufacturing,” Robotics and Computer-Integrated Manufacturing, vol. 39, pp. 32–42, 2016.
- A. Adebayo, X. Tonnellier, “Limiting Travel Speed in Additive Layer Manufacturing,” in Proceedings of the 9th International Conference on Trends in Welding Research, Chicago, Illinois, USA, 2012.
- S. Vijila, S. Ananthalakshmi, M. Kalaiselvi, P. Vijayan, V.S. Esther Pushpam, “Development of fuzzy rule based system for prediction of weld bead geometry,” in AIP Conference Proceedings, 2021.
- P. Hu, J. Huang, M. Zeng, “Application of fuzzy control method in gas metal arc welding,” International Journal of Advanced Manufacturing Technology, vol. 92, pp. 1769–1775, 2017.
- Y. Surender and D.K. Pratihar, “Fuzzy Logic-Based Techniques for Modeling the Correlation between the Weld Bead Dimension and the Process Parameters in MIG Welding,” International Journal of Manufacturing Engineering, 2013.
- K. Dąbrowski, K. Skrzypek, “Application of Fuzzy Analytic Hierarchy Process to Building Research Teams,” Management Systems in Production Engineering, vol. 21, no. 1, pp. 7–11, 2016.
- M.H. Al-Khafaji, “Development of Fuzzy Logic Model For Cutting Parameters Influence on The Cutting Force And The Chip Thickness Ratio During Turning Of Aluminum Alloy 1350-O,” The Iraqi Journal For Mechanical And Material Engineering, vol. 18, no. 1, pp. 110–124, 2018.
- K. Abd, K. Abhary, R. Marian, “Multi-objective optimisation of dynamic scheduling in robotic flexible assembly cells via fuzzy-based Taguchi approach,” Computers & Industrial Engineering, vol. 99, pp. 250–259, 2016.
- M.K. Oudah, M.Q. Sulttan, S.W. Shneen, “Fuzzy type 1 PID controllers design for TCP/AQM wireless networks,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 21, no. 1, pp. 118–127, 2021.
- T.J. Ross, Fuzzy Logic with Engineering Application, John Wiley & Sons, 2009.
Language: English
Page range: 46 - 53
Submitted on: Mar 1, 2024
Accepted on: Jan 1, 2025
Published on: Feb 17, 2025
Published by: STE Group sp. z.o.o.
In partnership with: Paradigm Publishing Services
Publication frequency: 4 issues per year
Related subjects:
© 2025 Mustafa Mohammed Abdulrazaq, Mohanned M. H. AL-Khafaji, Abdulkader Kadauw Salahaddin, Stefan Krinke, Henning Zeidler, published by STE Group sp. z.o.o.
This work is licensed under the Creative Commons Attribution 4.0 License.